2020-12-21 04:19:21 -06:00
|
|
|
---
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
# Harmonize systems rather than doing everything manually. :)
|
2020-12-28 18:37:37 -06:00
|
|
|
|
2021-02-02 21:34:08 -06:00
|
|
|
# Setup of any device connected to this repo.
|
2021-02-02 21:31:45 -06:00
|
|
|
- name: Main | Default Setup
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
hosts: localhost
|
2020-12-31 17:52:45 -06:00
|
|
|
connection: local
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
become: true
|
2020-12-28 20:06:41 -06:00
|
|
|
|
2021-04-07 20:46:41 -05:00
|
|
|
tasks:
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
|
|
|
|
|
####### Gather #######
|
|
|
|
|
# Load facts for all systems.
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: facts/general/gather.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/provision_config.yml
|
|
|
|
|
|
|
|
|
|
- include_tasks: facts/general/system.yml
|
|
|
|
|
- include_tasks: facts/general/package.yml
|
|
|
|
|
- include_tasks: facts/general/service.yml
|
|
|
|
|
- include_tasks: facts/general/user.yml
|
|
|
|
|
|
2021-02-02 21:05:46 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
####### NixOS #######
|
|
|
|
|
# Install the .nix files and do a little data setup.
|
2021-02-01 05:03:27 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- name: Main | NixOS Setup
|
|
|
|
|
block:
|
2021-02-01 05:03:27 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- include_tasks: tasks/general/software/nixos.yml
|
2021-02-12 07:47:22 -06:00
|
|
|
|
2020-12-21 05:50:12 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
# TBD if we are going to use this many, then just have IF statements
|
|
|
|
|
# and use blocks within the General area for NixOS vs not-NixOS.
|
|
|
|
|
- include_tasks: tasks/general/software/swap.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- include_tasks: tasks/general/acct_mgmt/groups.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/users.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/sudo.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/doas.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- include_tasks: tasks/general/scripts/root.yml
|
|
|
|
|
- include_tasks: tasks/general/scripts/user.yml
|
|
|
|
|
- include_tasks: tasks/general/scripts/install.yml
|
|
|
|
|
|
|
|
|
|
- include_tasks: tasks/general/cron/ansible.yml
|
|
|
|
|
|
|
|
|
|
# psutil does not work in NixOS. Cannot figure out how to fix it. Maybe
|
|
|
|
|
# time to start looking into home-manager but still not wanting to
|
|
|
|
|
# maintain two different GNOME setups. HMMMM!
|
|
|
|
|
- include_tasks: tasks/workstation/shared/settings/gnome.yml
|
|
|
|
|
when: workstation == true
|
|
|
|
|
|
|
|
|
|
# Try including these. Really need to get NixOS working with the rest!
|
|
|
|
|
#- include_tasks: tasks/general/software/telegraf.yml # "Could not find a module for unknown.""
|
|
|
|
|
- include_tasks: tasks/general/tests/services.yml
|
|
|
|
|
- include_tasks: tasks/general/tests/lynis.yml
|
|
|
|
|
- include_tasks: tasks/general/tests/nmap.yml
|
|
|
|
|
|
|
|
|
|
- name: NixOS | Complete
|
|
|
|
|
meta: end_play
|
|
|
|
|
|
|
|
|
|
when: ansible_distribution == "NixOS"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
####### General #######
|
|
|
|
|
# Basic setup for all enabled systems.
|
|
|
|
|
|
|
|
|
|
- name: Main | General Setup
|
|
|
|
|
block:
|
|
|
|
|
|
|
|
|
|
- include_tasks: tasks/general/software/swap.yml
|
|
|
|
|
- include_tasks: tasks/general/software/packages.yml
|
|
|
|
|
- include_tasks: tasks/general/software/services.yml
|
|
|
|
|
- include_tasks: tasks/general/software/sendmail.yml
|
|
|
|
|
when: ansible_system == "FreeBSD"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
# Gather again in case missing programs have now been installed.
|
|
|
|
|
- include_tasks: facts/general/gather.yml
|
|
|
|
|
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/groups.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/users.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/sudo.yml
|
|
|
|
|
- include_tasks: tasks/general/acct_mgmt/doas.yml
|
|
|
|
|
|
|
|
|
|
- include_tasks: tasks/general/scripts/root.yml
|
|
|
|
|
- include_tasks: tasks/general/scripts/user.yml
|
|
|
|
|
- include_tasks: tasks/general/scripts/install.yml
|
|
|
|
|
|
|
|
|
|
- include_tasks: tasks/general/cron/ansible.yml
|
|
|
|
|
|
|
|
|
|
# TODO Need to refactor. Maybe tasks/general/cron/freebsd.yml
|
|
|
|
|
- include_tasks: tasks/workstation/freebsd/cron/ansible.yml
|
|
|
|
|
when: ansible_system == "FreeBSD"
|
2021-12-17 17:34:21 -06:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- include_tasks: tasks/general/software/metasploit.yml
|
|
|
|
|
when: pentesting == true
|
|
|
|
|
|
|
|
|
|
when: provision == true
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
####### Workstations #######
|
2021-12-17 17:34:21 -06:00
|
|
|
# Additional setup for systems with GUI.
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
- name: Main | Workstation Setup
|
|
|
|
|
block:
|
2020-12-28 20:06:41 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: facts/workstation/package.yml
|
2021-02-01 08:28:12 -06:00
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
# Set Up Desktop Environments #
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/freebsd/software/gpu.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
when: ansible_system == "FreeBSD" and bsd_gpu == true
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/freebsd/software/gnome.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: ansible_system == "FreeBSD"
|
2021-02-03 07:36:51 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/linux/software/gnome.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: ansible_system == "Linux"
|
2021-07-13 21:27:20 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/software/dwm.yml
|
2021-11-07 12:40:31 -06:00
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
# Software Tasks #
|
2023-06-26 06:58:09 -07:00
|
|
|
- include_tasks: tasks/workstation/linux/software/packages.yml
|
|
|
|
|
when: ansible_system == "Linux"
|
|
|
|
|
|
2024-01-23 09:43:42 -07:00
|
|
|
- include_tasks: tasks/workstation/linux/software/flatpaks.yml
|
|
|
|
|
when: ansible_system == "Linux" and flatpak_distro
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/linux/software/brave.yml
|
2023-02-18 09:29:36 -06:00
|
|
|
when: ansible_pkg_mgr in ("apt", "dnf", "zypper") and not mobile
|
2021-02-07 13:02:00 -06:00
|
|
|
|
2024-01-23 09:43:42 -07:00
|
|
|
- include_tasks: tasks/workstation/linux/software/vpn.yml
|
|
|
|
|
when: ansible_system == "Linux"
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/freebsd/software/packages.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
when: ansible_system == "FreeBSD"
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/mac-os/software/brew.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: ansible_system == "Darwin"
|
2021-07-19 07:38:33 -05:00
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
# Configuration Tasks #
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/settings/gnome.yml
|
2022-12-03 15:28:29 -06:00
|
|
|
when: not mobile
|
2021-07-19 10:28:33 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/linux/cron/ansible.yml
|
2022-12-03 15:28:29 -06:00
|
|
|
when: ansible_system == "Linux" and not mobile
|
2021-02-01 05:03:27 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/settings/nfs.yml
|
2021-07-14 07:08:27 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/settings/rdp.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: rdp == true
|
2022-01-10 13:41:54 +00:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/settings/vnc.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: vnc == true
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/workstation/shared/settings/services.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
|
|
|
|
|
when: workstation == true
|
2021-10-18 07:13:49 -05:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
|
2022-01-10 13:41:54 +00:00
|
|
|
# No longer mining, this is now considered deprecated.
|
|
|
|
|
# ####### Miners #######
|
|
|
|
|
#
|
|
|
|
|
# # Additional setup for miners.
|
|
|
|
|
# - name: Main | Miner Setup
|
|
|
|
|
# block:
|
|
|
|
|
#
|
|
|
|
|
# ##### Setup #####
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/debug.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
#
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/acct_mgmt/users.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
#
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: facts/miner/system.yml
|
|
|
|
|
# - include_tasks: facts/miner/config.yml
|
|
|
|
|
# - include_tasks: facts/miner/pool.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
#
|
|
|
|
|
# ##### Installations #####
|
|
|
|
|
# ### CPU SECTION ###
|
|
|
|
|
# # Monero #
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/software/xmr-stak-cpu.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
# when: xmr_stak_cpu is defined
|
|
|
|
|
#
|
|
|
|
|
# ### GPU Section ###
|
|
|
|
|
# ## Drivers ##
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/drivers/amdgpu.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
# when: ansible_distribution == "Ubuntu" and amdgpu == true
|
|
|
|
|
#
|
|
|
|
|
# # Ethereum #
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/software/ethminer.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
# when: ethminer == true
|
|
|
|
|
#
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/software/nanominer.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
# when: nanominer == true
|
|
|
|
|
#
|
|
|
|
|
# ##### Scheduling #####
|
2023-02-19 10:04:10 -06:00
|
|
|
# - include_tasks: tasks/miner/cron/ansible.yml
|
|
|
|
|
# - include_tasks: tasks/miner/cron/mfn.yml
|
2022-01-10 13:41:54 +00:00
|
|
|
#
|
|
|
|
|
# when: miner == true
|
2021-02-11 08:05:34 -06:00
|
|
|
|
|
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
####### Servers #######
|
|
|
|
|
# Easy to deploy server configurations.
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
- name: Main | Server Setup
|
|
|
|
|
block:
|
2021-02-19 08:00:20 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/services.yml
|
2022-08-29 06:50:49 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/certbot.yml
|
2022-04-16 08:07:53 -05:00
|
|
|
when: certbot == true
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/cron/certbot.yml
|
2022-04-16 08:07:53 -05:00
|
|
|
when: certbot == true
|
|
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/onlyoffice.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: onlyoffice == true and ansible_pkg_mgr == "apt"
|
2021-02-19 08:00:20 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/influxdb1.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: influxdb1 == true and ansible_pkg_mgr == "apt"
|
2021-03-20 05:03:19 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/influxdb2.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: influxdb2 == true and ansible_pkg_mgr == "apt"
|
2021-03-20 05:03:19 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/grafana.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: grafana == true and ansible_pkg_mgr == "apt"
|
2021-03-14 19:39:18 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/hugo.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: hugo == true
|
2021-07-13 06:21:05 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/gitlab.yml
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: gitlab and ansible_pkg_mgr in ("apt", "dnf") and ansible_distribution not in ("Fedora")
|
2021-07-14 06:33:28 -05:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/server/software/git.yml
|
2021-12-24 14:55:21 -06:00
|
|
|
when: git and ansible_pkg_mgr in ("apt")
|
|
|
|
|
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
when: server == true
|
2021-02-19 08:00:20 -06:00
|
|
|
|
2021-04-07 20:46:41 -05:00
|
|
|
|
2021-12-17 17:34:21 -06:00
|
|
|
####### Reporting #######
|
|
|
|
|
# Provide information for analysis.
|
Hosts Variable Refactor, User Name Refactor, Metasploit, Brave on Fedora, Aliases (#19)
* Add Brave to Fedora (DNF).
* First attempt to add metasploit installer.
* Fix check for Linux and macOS to use System, not Distro.
* Add more memorable aliases for msfconsole.
* Telegraf is attemping to install doube-time since hosts match both localhost and hostname.
* Add missing pipe.
* Attempt to fix flatpak play no longer being able to find user_ling var. Don't see anything in the dev branch which would have changed this behavior though.
* Add note for future removal.
* Use general gather for all groups. Move user variables to it.
* Feodra Workstation succeeds now! Add newline to end of file.
* First attempt at doing host variables via local files.
* Try using ini as lookup.
* Remove "-" typo.
* Add an initial gather even though it may not have all values properly populated on a machine's first run.
* Fix typo in ignore.
* Try default values.
* Try defaults without quotes.
* Add a section header. Add a default back.
* Rename section to global.
* Add workstation provision file. Change variables to require true. Only load config file if hosts is not being used.
* Put flags back on Dell so that programs are not removed while configuring files.
* Add provision config read to workstation.
* Go ahead and force config files for hosts. Only affects dev branch until PR. Start making miner and server files.
* Change {{}} to (()) in comments to avoid undefined variable error.
* Attempt to modify existing task groups instead of moving all tasks to one large group.
* Try to use blocks.
* Name blocks and remove redundant calls.
* Do the bare minimum for miner and server so the variables are at least defined.
* Ensure Server and Miner look at their own files.
* Test how block variables are handled.
* Are the variables true Booleans, not strings??
* Change exits to tests so we can see which ones work.
* Add more tests.
* Add the test results.
* Add config_dir for plays to use when making any config files.
* Move provision config dir.
* Add results of test.
* Remove the exit. Fix the blocks' whens.
* Do provision after starting, that way all facts exist.
* Fix all "true"'s.
* Adjust variable checks for provision_config changes.
* Change gui to wrk. Add aliases to cat files.
* Comment entire hosts file.
* Add localhost,
* Try localhost rather than host file group.
* Fix typo in "prov_dir".
* Add newline to end of file.
* Add newline to end of file.
* Add newline to end of file.
* Debug variable. Should be getting set but receiving errors on Fedora.
* Add newline to end of file.
* Fix debug property, var not name.
* Fix show-config. Change show-config-all to only hit active files, not backups.
* Uncomment commented workstation.
* Add commands to edit files.
* Attempt to fix gitlab installer variables.
* Attempt to fix gitlab play variable.
* Replacing `ling` for `{{ user }}`.
* Remove TODO.
* Remove `config_dir` and move provision config back near top.
* `user_root` is not needed, already moved to /usr/local/etc/.
* Add value for running anything at all. This allows user to set up files before first run.
* Reduce the check frequency,
* Ensure files are printed in correct order. Also add a newline between each.
* Only send file if it exists, and then remove it if it sends successfully.
* Always set the destination variables.
* Only run the scp for systems without sshfs. Forgot that system variables were shared between the two, and do not want to scp the files to themselves then delete the files from the mount.
2021-12-05 18:08:51 -06:00
|
|
|
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/general/software/telegraf.yml
|
2021-03-20 12:05:18 -05:00
|
|
|
|
General Enhancements, NixOS Support (#47)
* Begin adding Nix.
* Install LBRY from Nix since its Flatpak is no longer supported..
* Got the global install to work, now just figuring out why LBRY won't work.
* Add alias to blow away dev branch and start back up from remote or main.
* Nix install not really working, requires manual intervention, maybe add to setup.sh or just try NixOS and see if it can 'replace' this entire Ansible project and cease the use of multiple operating systems.
* Start working on having a path for NixOS.
* Add NixOS.
* Skip the installer portion if using NixOS.
* Start including more tasks. ALl work besides GNOME due to psutil, even though it is included in configuration.nix.
* This should have never been added. Was an accident if it snuck though.
* Test using env rather than hard-coded bash path.
* Use variables, start thinking about future.
* Add file to manage setting up NixOS for the first or any subsequent times.
* Use the new nixos.sh script.
* Ensure /usr/local/bin is in PATH.
* Do not use * inside of "" for ls.
* Add filename cleanup shortcut.
* Add a clean option as well as a few bugfixes and checking that convert is installed.
* Use underscores in filenames and remove plurality.
* Bring the file into better column compliance.
* Stop running the dconf psutil failures against NixOS for now.
* Ensure the old names of scripts are removed from bin.
* Clean filename fixes as well as a traversing version.
* Remove extra spacing.
* Begin adding swapfile creation.
* Add dangerous code reset command.
* Add some cleaning for NixOS package manager.
* The ~ was being taken literally and created as a new folder.
* More work on swap files, and a new ansible.nix file.
* Fix the swap confuration line.
* Finish the swap configuration by checking if it already exists. Always keep the fstab line in existence.
* Reorder and enhance the update function for NixOS.
* Add comment.
* Start working on dconf for NixOS since don't have home-manager working yet in configration.nix.
* Add notes.
* If the file was created, make sure the user owns it and can edit by default.
* Favorites are working and only need maintained in one place! :)
* Add .zshrc for GNOME settings on NixOS.
* Add most other settings that are done manually post-install. Report any failures with their placement.
* FINALLY! Keyboard shortcuts and some final Gnome Tweak settings!
* Add night light settings.
* Move around some comments.
* Pull first then deal with any merge issues, rather than trying to push when there are things to pull.
* Test removing the dconf commands for non-NixOS.
* Alter output; remove extra newlines and add cache verbosity.
* dconf in rc files is working on Ubuntu!
* Add delete. Fix filename quotes. Other enhancements.
* Create new folder chain if clean changed directory names.
* Add TBD about changing the directory structure.
* Only say success if the file really exists. Skip if conversion fails.
* Only say success if the file really exists. Skip if conversion fails.
* Add quotes around dirname.
* Add quotes around the entire directory tree.
* Add quotes to comment in case it ever gets used.
* Add a bittorrent client.
* Disable Bluetooth on all devices, it's normally off anyways.
* Fix comments, this enables not disables.
* Create new services report.
* Add services report to main area and move all reports to NixOS area.
* Fix swap file variable name for non-NixOS distros.
* Add godot editor.
* Re-add extra programs Geary and OpenShot for variety.
* Shorten the output for 80 char terminals.
* Add Code-OSS for when Codium is having issues.
* Allow code-oss to be installed.
* Add the full desktop entry for Code-OSS.
* Ansible handles the newlines, prevent the -e from getting into the file.
* Enhance newlines in nmap report.
* Add NixOS.
2023-10-17 04:30:36 -07:00
|
|
|
- include_tasks: tasks/general/tests/services.yml
|
2023-02-19 10:04:10 -06:00
|
|
|
- include_tasks: tasks/general/tests/lynis.yml
|
|
|
|
|
- include_tasks: tasks/general/tests/nmap.yml
|
