Use true instead of yes.

facts/general/gather.yml

@@ -4,15 +4,14 @@
 - name: General | Facts | Gather | Locate bash
   shell: which bash
   register: bash_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Gather | Locate ansible-pull
   shell: which ansible-pull
   register: ansible_pull_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Gather | Locate zsh
   shell: which zsh
   register: zsh_exec
-  ignore_errors: yes
-
+  ignore_errors: true

facts/general/package.yml

@@ -271,7 +271,7 @@
 - name: General | Facts | Package | Update Command | Flatpak | Check
   shell: which flatpak
   register: flatpak_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Package | Update Command | Flatpak | Exists
   set_fact:
@@ -295,7 +295,7 @@
 - name: General | Facts | Package | Update Command | Firmware | Check
   shell: which fwupdmgr
   register: fwupdmgr_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Package | Update Command | Firmware | Exists
   set_fact:

tasks/general/acct_mgmt/doas.yml

@@ -15,7 +15,7 @@
     name:
       - doas
   register: doas_install
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | DoAs | Configure [Linux]
   blockinfile:
@@ -24,8 +24,8 @@
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas Linux'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: not doas_install.failed and ansible_system in ("Linux")
 
 - name: General | Software | DoAs | Configure [BSD]
@@ -35,8 +35,8 @@
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas BSD'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: not doas_install.failed and ansible_system in ("FreeBSD")
 
 - name: General | Software | DoAs | Configure [Other]
@@ -46,8 +46,8 @@
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas Other'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - "{{ doas_conf_file_linux }}"
     - "{{ doas_conf_file_bsd }}"

tasks/general/acct_mgmt/groups.yml

@@ -4,7 +4,7 @@
 - name: General | Account Management | System Groups
   group:
     name: "{{ item }}"
-    system: yes
+    system: true
     state: present
   loop:
     - sudo

tasks/general/acct_mgmt/provision_config.yml

@@ -146,8 +146,8 @@
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Generic Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | General | Load
   set_fact:
@@ -246,8 +246,8 @@
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Workstation Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | Workstation | Load
   set_fact:
@@ -327,8 +327,8 @@
 #      [global]
 #    marker: '; {mark} MANAGED BY ANSIBLE | Miner Config'
 #    state: present
-#    create: yes
-#    backup: yes
+#    create: true
+#    backup: true
 #
 #- name: General | Account Management | Provisioning Configuration | Miner | Load
 #  set_fact:
@@ -396,8 +396,8 @@
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Server Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | Server | Load
   set_fact:

tasks/general/acct_mgmt/sudo.yml

@@ -26,8 +26,8 @@
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?Defaults targetpw',   "value": '#Defaults targetpw'}
     - { "key": '^[\#]?ALL   ALL\=\(ALL\) ALL', "value": '#ALL   ALL=(ALL) ALL'}

tasks/general/acct_mgmt/users.yml

@@ -13,7 +13,7 @@
     regexp: "{{ bash_exec.stdout }}"
     line: "{{ bash_exec.stdout }}"
     insertbefore: "# End of file"
-    backup: yes
+    backup: true
     create: no
     state: present
   when: ansible_pkg_mgr == "pacman"
@@ -29,7 +29,7 @@
 #    regexp: "{{ zsh_exec.stdout }}"
 #    line: "{{ zsh_exec.stdout }}"
 #    insertbefore: "# End of file"
-#    backup: yes
+#    backup: true
 #    create: no
 #    state: present
 #  when: ansible_pkg_mgr == "pacman"
@@ -41,8 +41,8 @@
   user:
     name: root
     shell: "{{ bash_exec.stdout }}"
-    create_home: yes
-    generate_ssh_key: yes
+    create_home: true
+    generate_ssh_key: true
   register: user_root
 
 
@@ -52,7 +52,7 @@
   user:
     name: ansible
     comment: Ansible
-    system: yes
+    system: true
   register: user_ansible
 
 
@@ -67,10 +67,10 @@
       - video
       - render
       - wheel
-    append: yes
+    append: true
     shell: "{{ user_shell }}"
-    create_home: yes
-    generate_ssh_key: yes
+    create_home: true
+    generate_ssh_key: true
   register: user_user
 
 - name: General | Account Management | Users | User | Test Logging In
@@ -1324,7 +1324,7 @@
         echo "`date` - Ansible .profile loaded successfully!"
     marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
     state: present
-    create: yes
+    create: true
     backup: no
   loop:
     - ".profile"
@@ -1345,7 +1345,7 @@
         echo "`date` - Ansible .bashrc loaded successfully!"
     marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
     state: present
-    create: yes
+    create: true
     backup: no
   loop:
     - "{{ user_root.home }}"
@@ -1361,7 +1361,7 @@
         echo "`date` - Ansible .zshrc loaded successfully!"
     marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
     state: present
-    create: yes
+    create: true
     backup: no
   loop:
     - "{{ user_root.home }}"
@@ -1383,7 +1383,7 @@
 
 - name: General | Account Management | Users | Files | Helper Functions (Reset)
   shell: "rm -v {{ global_bin }}/*.function"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Account Management | Users | Files | Helper Functions
   copy:
@@ -1406,7 +1406,7 @@
     clone: true
     force: true
     update: true
-  #ignore_errors: yes
+  #ignore_errors: true
 
 - name: General | Account Management | Users | env-shared | Install | .rc_shared
   copy:
@@ -1418,7 +1418,7 @@
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  #ignore_errors: yes
+  #ignore_errors: true
   when: user_root.home != "" and user_user.home != ""
 
 - name: General | Account Management | Users | env-shared | Install | .vimrc
@@ -1431,7 +1431,7 @@
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  #ignore_errors: yes
+  #ignore_errors: true
   when: user_root.home != "" and user_user.home != ""
 
 - name: General | Account Management | Users | env-shared | Permissions
@@ -1443,4 +1443,4 @@
   loop:
     - .rc_shared
     - .vimrc
-  #ignore_errors: yes
+  #ignore_errors: true

tasks/general/scripts/root.yml

@@ -11,7 +11,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | Root | scm.sh Permissions
   file:
@@ -41,7 +41,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | Root | scm-dev.sh Permissions
   file:

tasks/general/scripts/user.yml

@@ -11,7 +11,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | User | scm.sh Permissions
   file:
@@ -41,7 +41,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | User | scm-dev.sh Permissions
   file:

tasks/general/settings/keyboard.yml

@@ -8,8 +8,8 @@
     regexp: '{{ item.key }}'
     line: '{{ item.value }}'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     #- { "key": '^[\#]?XKBMODEL',   "value": 'XKBMODEL="pc105"'}
     - { "key": '^[\#]?XKBLAYOUT',  "value": 'XKBLAYOUT="us"'}

tasks/general/software/nixos.yml

@@ -29,8 +29,8 @@
         {{ nixos_swap }}
       }
     state: present
-    backup: yes
-    create: yes
+    backup: true
+    create: true
 
 
 #  Maybe do home manager here? Or should it be under Workstation? Or maybe

tasks/general/software/packages.yml

@@ -7,7 +7,7 @@
 #   so resetting the value to apt doesn't work. Just going to move it.
   shell: "mv `which zypper` `which zypper`.zz.`date +%Y%m%d`"
   register: parrotos_zypper_removed
-  ignore_errors: yes
+  ignore_errors: true
   when: ansible_distribution == "Parrot OS"
 
 - name: General | Software | Packages | Fix Parrot OS (zypper), Exit Incoming
@@ -23,13 +23,13 @@
 # have sudo or anything in it. Hide it in preference for .bashrc update function.
 - name: General | Software | Packages | Fix Parrot OS 2 (update)
   shell: "mv `which update` `which update`.zz.`date +%Y%m%d`"
-  ignore_errors: yes
+  ignore_errors: true
   when: ansible_distribution == "Parrot OS"
 
 
 - name: General | Software | Packages | Cache Refresh (Apt and Pacman)
   package:
-    update_cache: yes
+    update_cache: true
     name: htop
   when: ansible_pkg_mgr in ["apt", "pacman"]
 
@@ -77,7 +77,7 @@
       - "{{ microcode_intel }}"
     state: present
   when: branch == "dev"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Add Generic Kernel + Tools (Ubuntu)
   package:
@@ -88,7 +88,7 @@
       - linux-tools-common
     state: present
   when: ansible_distribution == "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Add Generic Kernel + Headers (Debian)
   package:
@@ -97,7 +97,7 @@
       - linux-headers-amd64
     state: present
   when: ansible_distribution == "Debian"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Install killall (Looking at you, Debian)
   package:
@@ -150,7 +150,7 @@
     state: stopped
     enabled: no
   when: ansible_distribution != "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Remove Snap (Besides Ubuntu)
   package:
@@ -158,7 +158,7 @@
       - snapd
     state: absent
   when: ansible_distribution != "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Other Debian Packages
   package:
@@ -166,4 +166,4 @@
       - usbutils
     state: present
   when: ansible_distribution in ("Debian")
-  ignore_errors: yes
+  ignore_errors: true

tasks/general/software/sendmail.yml

@@ -10,7 +10,7 @@
 - name: Server | Sendmail | Check
   shell: which postfix
   register: postfix
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | Sendmail | Install
   package:
@@ -27,8 +27,8 @@
       sendmail_msp_queue_enable="YES"
     marker: "# {mark} MANAGED BY ANSIBLE - sendmail"
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: postfix.failed and ansible_system == "FreeBSD"
 
 - name: Server | Sendmail | Enable + Start | Main
@@ -36,7 +36,7 @@
     name: "{{ sendmail }}"
     pattern: "{{ sendmail }}"
     state: started
-    enabled: yes
+    enabled: true
   when: postfix.failed
 
 - name: Server | Sendmail | Enable + Start | Queue
@@ -44,5 +44,5 @@
     name: "{{ sendmail_queue }}"
     pattern: "{{ sendmail_queue }}"
     state: started
-    enabled: yes
+    enabled: true
   when: postfix.failed and ansible_system == "FreeBSD"

tasks/general/software/services.yml

@@ -8,7 +8,7 @@
     name: "{{ crond }}"
     pattern: "{{ crond_pattern }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
     and ansible_service_mgr != "runit"
   register: cron_status
@@ -20,7 +20,7 @@
   service:
     name: "{{ crond }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
     and ansible_service_mgr == "runit"
   ignore_errors: true # Service module seems experimental for this init system.
@@ -33,8 +33,8 @@
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?AllowUsers',           "value": 'AllowUsers {{ user }}'}
     - { "key": '^[\#]?PermitRootLogin',      "value": 'PermitRootLogin no'}
@@ -57,8 +57,8 @@
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?AllowUsers',      "value": 'AllowUsers root {{ user }}'}
     - { "key": '^[\#]?PermitRootLogin', "value": 'PermitRootLogin yes'}
@@ -70,7 +70,7 @@
     name: "{{ sshd }}"
     pattern: "{{ sshd_pattern }}"
     state: reloaded
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
     and ansible_service_mgr != "runit"
   register: sshd_status
@@ -84,7 +84,7 @@
   shell: journalctl --vacuum-size=100M
   when: ansible_system == "Linux"
     and ansible_service_mgr == "systemd"
-  ignore_errors: yes
+  ignore_errors: true
 
 ## Bluetooth ##
 # Do people seriously depend on Bluetooth? Plug your devices in, silly!
@@ -96,7 +96,7 @@
 #    pattern: "{{ bluetooth_pattern }}"
 #    state: stopped
 #    enabled: no
-#  ignore_errors: yes
+#  ignore_errors: true
 
 ## NTP ##
 
@@ -105,7 +105,7 @@
     name: "{{ ntp_server }}"
     pattern: "{{ ntp_server }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
     and ansible_service_mgr != "runit"
   register: ntp_status
@@ -128,7 +128,7 @@
     pattern: "{{ item.pattern }}"
     state: stopped
     enabled: no
-  ignore_errors: yes
+  ignore_errors: true
   loop:
     - {name: "{{ cups }}"       , pattern: "{{ cups_pattern }}"}
     - {name: "{{ cups_browse }}", pattern: "{{ cups_browse_pattern }}"}
@@ -139,11 +139,10 @@
     if [[ -e {{ runit_service_dir }}/{{ item.name }} ]]; then
       rm -v {{ runit_service_dir }}/{{ item.name }}
     fi
-  ignore_errors: yes
+  ignore_errors: true
   loop:
     - {name: "{{ cups }}"               }
     - {name: "{{ cups_pattern }}"       }
     - {name: "{{ cups_browse }}"        }
     - {name: "{{ cups_browse_pattern }}"}
   when: ansible_service_mgr == "runit"
-

tasks/general/software/swap.yml

@@ -36,7 +36,7 @@
       regexp: '^[\#]?{{ swap_file }}'
       line: '{{ swap_file }} none swap sw 0 0'
       state: present
-      backup: yes
+      backup: true
     when: ansible_distribution != "NixOS"
 
   # Only run through this file if the ini has been changed from false.

tasks/general/software/telegraf.yml

@@ -73,7 +73,7 @@
 ###
 ###- name: General | Telegraf | Config 1/2
 ###  shell: mv {{ telegraf_config }} ~/TRASH/
-###  ignore_errors: yes
+###  ignore_errors: true
 ###
 ###- name: General | Telegraf | Config 2/2
 ###  blockinfile:
@@ -158,7 +158,7 @@
 ###
 ###    marker: '# {mark} MANAGED BY ANSIBLE - telegraf.yml'
 ###    state: present
-###    create: yes
+###    create: true
 
 # Run #
 
@@ -170,7 +170,7 @@
     special_time: "{{ item.freq }}"
     state: present
     #disabled: "{{ 'yes' if no_telem else 'no' }}"
-    disabled: yes # 2024-01-25, Downsizing again and will not have Graphana.
+    disabled: true # 2024-01-25, Downsizing again and will not have Graphana.
   loop:
     - { "name": "Telegraf Reboot Job"    , "freq": "reboot", "command": "{{ telegraf_cmd }}"}
     - { "name": "Telegraf Keep-Alive Job", "freq": "hourly", "command": "{{ telegraf_watcher }}"}

tasks/general/tests/lynis.yml

@@ -16,7 +16,7 @@
     clone: true
     force: true
     update: true
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Tests | Lynis | Ensure Permissions (Looking at you Parrot OS!)
   file:
@@ -25,7 +25,7 @@
     mode: '0644'
     owner: root
     group: "{{ root_group }}"
-    recurse: yes
+    recurse: true
 
 - name: General | Tests | Lynis | Ensure Permissions 2
   file:

tasks/miner/acct_mgmt/users.yml

@@ -14,10 +14,10 @@
   user:
     name: mfn
     comment: Miner Forty Niner
-    system: yes
+    system: true
     groups:
       - video
       - render
-    append: yes
+    append: true
     shell: "{{ bash_exec.stdout }}"
   register: user_mfn

tasks/miner/cron/ansible.yml

@@ -22,5 +22,5 @@
     job: sudo apt update && sudo apt dist-upgrade -y
     special_time: reboot
     state: present
-    disabled: yes
+    disabled: true
   when: ansible_pkg_mgr == "apt"

tasks/miner/drivers/amdgpu.yml

@@ -21,7 +21,7 @@
     regexp: '^GRUB_TIMEOUT='
     line: 'GRUB_TIMEOUT=3'
     state: present
-    backup: yes
+    backup: true
 
 - name: Miner | Driver | AMDGPU | Remove Previous Run's Cron Job
   cron:
@@ -33,22 +33,22 @@
 - name: Miner | Driver | AMDGPU | Check If GA Kernel Installed
   shell: 'uname --kernel-release | grep 5.4.0-65-generic'
   register: ga_kernel
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | Check If HWE Kernel Installed
   shell: 'apt search linux-image-5.8.0-* | grep -c installed'
   register: hwe_kernel
-  ignore_errors: yes
+  ignore_errors: true
 
 #- name: Miner | Driver | AMDGPU | Check If All Driver Installed
 #  shell: 'which amdgpu-uninstall'
 #  register: amdgpu_install
-#  ignore_errors: yes
+#  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | Check If Pro Driver Installed
   shell: 'amdgpu-pro-uninstall -y'
   register: amdgpu_install
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | DEBUG
   debug:
@@ -82,7 +82,7 @@
     regexp: '^GRUB_DEFAULT='
     line: 'GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 5.4.0-65-generic"'
     state: present
-    backup: yes
+    backup: true
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Update GRUB
@@ -131,7 +131,7 @@
     regexp: '^GRUB_DEFAULT='
     line: 'GRUB_DEFAULT=0'
     state: present
-    backup: yes
+    backup: true
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 - name: Miner | Driver | AMDGPU | Update GRUB
@@ -205,4 +205,4 @@
 - name: Miner | Driver | AMDGPU | Test Results
   debug:
     var: clinfo
-  ignore_errors: yes
+  ignore_errors: true

tasks/miner/software/ethminer.yml

@@ -16,7 +16,7 @@
 - name: Miner | Software | Ethminer | Add PPA
   apt_repository:
     repo: ppa:ethereum/ethereum
-    update_cache: yes
+    update_cache: true
     state: present
 
 - name: Miner | Software | Ethminer | Install Ethereum
@@ -29,7 +29,7 @@
 - name: Miner | Software | Ethminer | Test If Installed
   shell: "which ethminer"
   register: ethminer_install
-  ignore_errors: yes
+  ignore_errors: true
 
 
 ## Download ##
@@ -37,7 +37,7 @@
   shell: rm -rf ethminer
   args:
     chdir: "{{ root_home.stdout }}/Downloads"
-  ignore_errors: yes
+  ignore_errors: true
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | Clone Git Repo

tasks/miner/software/nanominer.yml

@@ -28,7 +28,7 @@
 
 - name: Miner | Software | Nanominer | Configuration | Reset
   shell: "mv {{ nanominer_config }} ~/TRASH/"
-  ignore_errors: yes
+  ignore_errors: true
 
 # CPU #
 
@@ -50,7 +50,7 @@
     marker_begin: ';;;;;;;;;;;; BEGIN'
     marker_end: ' END'
     state: "{{ item.state }}"
-    create: yes
+    create: true
   loop:
     - { "algorithm": "RandomX", "wallet": '{{ wallet_xmr }}', "state": "{{ (nanominer_cpu == 'xmr') | ternary('present', 'absent') }}"}
   become: true
@@ -119,7 +119,7 @@
     marker_begin: ';;;;;;;;;;;; BEGIN'
     marker_end: ' END'
     state: "{{ item.state }}"
-    create: yes
+    create: true
   loop:
     - { "algorithm": "Ethash", "wallet": '{{ wallet_eth }}', "state": "{{ (nanominer_gpu == 'eth') | ternary('present', 'absent') }}"}
   become: true
@@ -153,7 +153,7 @@
 
 - name: Miner | Software | Nanominer | Executable | Reset
   shell: "mv {{ nanominer_script }} ~/TRASH/"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Miner | Software | Nanominer | Executable | Create
   blockinfile:
@@ -173,7 +173,7 @@
     marker_begin: "#!{{ bash_exec.stdout }} -x"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   become: true
   become_user: mfn
 
@@ -195,4 +195,4 @@
   shell: "killall {{ nanominer_script }}; killall {{ nanominer_exec }}; killall nanominer.sh; killall nanominer"
   become: true
   become_user: mfn
-  ignore_errors: yes
+  ignore_errors: true

tasks/server/software/influxdb1.yml

@@ -5,7 +5,7 @@
 - name: Server | InfluxDB1 | Check
   shell: which influxd
   register: influxdb_check
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | InfluxDB1 | Install
   shell: "{{ item }}"

tasks/server/software/influxdb2.yml

@@ -5,7 +5,7 @@
 - name: Server | InfluxDB2 | Check
   shell: which influxd
   register: influxdb_check
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | InfluxDB2 | Install
   shell: "{{ item }}"

tasks/server/software/onlyoffice.yml

@@ -29,7 +29,7 @@
     - psql -c "GRANT ALL privileges ON DATABASE onlyoffice TO onlyoffice;"
   become: true
   become_user: postgres
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | OnlyOffice | RabbitMQ | Install
   package:
@@ -62,7 +62,7 @@
 #- name: Server | OnlyOffice | HTTPS | Check For Cert
 #  shell: "ls -l /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/{fullchain,privkey}.pem"
 #  register: onlyoffice_cert
-#  ignore_errors: yes
+#  ignore_errors: true
 #
 #- name: Server | OnlyOffice | HTTPS | Create Cert
 #  shell: "certbot --nginx -d {{ ansible_hostname }}.{{ domain }}"
@@ -85,7 +85,7 @@
 #    line: '{{ item.line }}; # MANAGED BY ANSIBLE'
 #    state: present
 #    create: no
-#    backup: yes
+#    backup: true
 #  loop:
 #    - { "regexp": "ssl_certificate ", "line": "  ssl_certificate /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/fullchain.pem" }
 #    - { "regexp": "ssl_certificate_key ", "line": "  ssl_certificate_key /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/privkey.pem" }
@@ -96,4 +96,4 @@
   service:
     name: nginx
     status: reloaded
-  ignore_errors: yes
+  ignore_errors: true

tasks/server/software/services.yml

@@ -8,13 +8,13 @@
     name: "{{ acpi }}"
     state: present
   when: ansible_system == "Linux"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | Software | Services | ACPID | Enable
   service:
     name: "{{ acpi }}"
     pattern: "{{ acpi_pattern }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_system == "Linux"
-  ignore_errors: yes
+  ignore_errors: true

tasks/workstation/freebsd/software/gnome.yml

@@ -25,8 +25,8 @@
       gnome_enable="YES"
       #gdm_enable="YES"
       lightdm_enable="YES"
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: Workstation | FreeBSD | Software | GUI | Create fstab Entries
   blockinfile:
@@ -35,7 +35,7 @@
       proc            /proc           procfs  rw      0       0
     marker: '# {mark} MANAGED BY ANSIBLE | GNOME Components'
     state: present
-    backup: yes
+    backup: true
 
 - name: Workstation | FreeBSD | Software | GUI | Mount All
   shell: mount -a

tasks/workstation/freebsd/software/gpu.yml

@@ -13,5 +13,5 @@
     marker: "# {mark} MANAGED BY ANSIBLE | GPU Components"
     block: |
       kld_list="{{ freebsd_gpu }}"
-    create: yes
-    backup: yes
+    create: true
+    backup: true

tasks/workstation/linux/software/android.yml

@@ -379,8 +379,8 @@
       export PATH="$PATH:{{ android_bin_location }}:{{ android_sdk_cmdline_final }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Android'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
@@ -396,8 +396,8 @@
       export PATH="$PATH:{{ android_bin_location }}:{{ android_sdk_cmdline_final }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Android'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"

tasks/workstation/linux/software/brave.yml

@@ -42,7 +42,7 @@
 ###    - rpm --import https://brave-browser-rpm-release.s3.brave.com/brave-core.asc
 ###    - zypper addrepo https://brave-browser-rpm-release.s3.brave.com/brave-browser.repo
 ###  when: ansible_pkg_mgr == "zypper"
-###  ignore_errors: yes
+###  ignore_errors: true
 ###
 ###- name: Workstation | Software | Brave | Install
 ###  package:

tasks/workstation/linux/software/cinnamon.yml

@@ -21,4 +21,4 @@
       - "{{ cinnamon_package }}"
       - "{{ lightdm }}"
     state: present
-    update_cache: yes
+    update_cache: true

tasks/workstation/linux/software/flatpaks.yml

@@ -19,7 +19,7 @@
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Install
   package:
     name: flatpak
-    update_cache: yes
+    update_cache: true
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Add Flathub for System
   flatpak_remote:
@@ -100,7 +100,7 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_generic }}"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Generic | Executables
   blockinfile:
@@ -111,7 +111,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   loop: "{{ flatpaks_generic }}"
   become: true
   become_user: "{{ user }}"
@@ -131,7 +131,7 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Executables
@@ -143,7 +143,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   loop: "{{ flatpaks_coding }}"
   become: true
   become_user: "{{ user }}"
@@ -163,7 +163,7 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Remove Executables
@@ -171,7 +171,7 @@
     path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not coding
 
 # Media Editors #
@@ -182,7 +182,7 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Video Editors | Executables
@@ -194,7 +194,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   loop: "{{ flatpaks_editing_video }}"
   become: true
   become_user: "{{ user }}"
@@ -214,7 +214,7 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Video Editors | Remove Executables
@@ -222,7 +222,7 @@
     path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio Editors | Installs
@@ -231,7 +231,7 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: editing in (true, "audio")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio/Video Editors | Executables
@@ -243,7 +243,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   loop: "{{ flatpaks_editing_audio }}"
   become: true
   become_user: "{{ user }}"
@@ -263,7 +263,7 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not editing in (true, "audio")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio/Video Editors | Remove Executables
@@ -271,7 +271,7 @@
     path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not editing in (true, "audio")
 
 # Gaming #
@@ -282,7 +282,7 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Executables
@@ -294,7 +294,7 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
   loop: "{{ flatpaks_gaming }}"
   become: true
   become_user: "{{ user }}"
@@ -314,7 +314,7 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Remove Executables
@@ -322,7 +322,7 @@
     path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: not gaming
 
 # Removals #
@@ -333,11 +333,11 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_remove }}"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Uninstalls | Remove Executables
   file:
     path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_remove }}"
-  ignore_errors: yes
+  ignore_errors: true

tasks/workstation/linux/software/flutter.yml

@@ -135,12 +135,12 @@
       export PATH="$PATH:{{ flutter_bin_location }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Flutter'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: coding
     and user_root.home != ""
     and user_user.home != ""
@@ -152,12 +152,12 @@
       export PATH="$PATH:{{ flutter_bin_location }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Flutter'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
+  ignore_errors: true
   when: coding
     and user_root.home != ""
     and user_user.home != ""

tasks/workstation/linux/software/lutris.yml

@@ -37,10 +37,10 @@
 - name: Workstation | Linux | Software | Lutris | Add PPA (Ubuntu)
   apt_repository:
     repo: ppa:lutris-team/lutris
-    update_cache: yes
+    update_cache: true
     state: present
   when: ansible_distribution in ("Ubuntu") and gaming
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Workstation | Linux | Software | Lutris | Add PPA (Debian)
   shell: "{{ item }}"
@@ -76,10 +76,10 @@
 - name: Workstation | Linux | Software | Lutris | Remove PPA (Ubuntu)
   apt_repository:
     repo: ppa:lutris-team/lutris
-    update_cache: yes
+    update_cache: true
     state: absent
   when: ansible_distribution in ("Ubuntu") and ! gaming
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Workstation | Linux | Software | Lutris | Remove PPA (Debian)
   shell: "{{ item }}"

tasks/workstation/linux/software/lxqt.yml

@@ -17,4 +17,4 @@
       - "{{ lxqt_package }}"
       - "{{ sddm }}"
     state: present
-    update_cache: yes
+    update_cache: true

tasks/workstation/linux/software/nodejs.yml

@@ -23,7 +23,7 @@
       package:
         name: extrepo
         state: present
-        update_cache: yes
+        update_cache: true
 
     - name: Workstation | Software | NodeJS | apt | extrepo | Enable
       shell: "extrepo enable {{ node_version }}"
@@ -32,7 +32,7 @@
       package:
         name: nodejs
         state: latest
-        update_cache: yes
+        update_cache: true
 
     when: ansible_pkg_mgr == "apt"
 

tasks/workstation/linux/software/tlp.yml

@@ -35,7 +35,7 @@
 #  loop:
 #    - "{{ ppd_service }}"
 #    - "{{ acf_service }}"
-#  ignore_errors: yes
+#  ignore_errors: true
 
 - name: Workstation | Linux | Software | TLP | Conflicts | Remove
   package:
@@ -53,7 +53,7 @@
       - "{{ tlp_rdw }}"
       - "{{ tlp_smart }}"
       - "{{ tlp_run_script }}"
-    update_cache: yes
+    update_cache: true
 
 ## Configuration ##
 
@@ -72,8 +72,8 @@
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?TLP_ENABLE', "value": 'TLP_ENABLE=1'}
     - { "key": '^[\#]?TLP_DEFAULT_MODE', "value": 'TLP_DEFAULT_MODE=SAV'}
@@ -185,7 +185,7 @@
       alias on="devices-on "
     marker: '# {mark} MANAGED BY ANSIBLE | tlp'
     state: present
-    create: yes
+    create: true
     backup: no
   loop:
     - "{{ user_user.home }}/.bashrc"

tasks/workstation/shared/settings/cinnamon.yml

@@ -330,8 +330,8 @@
       fi # End Disable Cinnamon Settings
     marker: '# {mark} MANAGED BY ANSIBLE | Cinnamon Settings'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   become_user: "{{ user }}"
   loop:
     - .bashrc

tasks/workstation/shared/settings/gnome.yml

@@ -85,7 +85,7 @@
     git:
       repo: https://github.com/micheleg/dash-to-dock.git
       dest: "~/TRASH/dash-to-dock/"
-      clone: yes
+      clone: true
       force: no
       version: master
     become_user: "{{ user }}"
@@ -170,7 +170,7 @@
     when: ansible_distribution not in ("Ubuntu") and dash_to_dock_exists.failed
 
   when: ansible_distribution not in ("NixOS")
-  ignore_errors: yes
+  ignore_errors: true
 # End block for Dash To Dock.
 
 # Apply dconf settings through RC files due to distros without working psutil.
@@ -431,8 +431,8 @@
       unset dconf_count
     marker: '# {mark} MANAGED BY ANSIBLE | GNOME Settings'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   become_user: "{{ user }}"
   loop:
     - .bashrc

tasks/workstation/shared/settings/nfs.yml

@@ -34,6 +34,6 @@
       nfs_client_flags="-n 4"
       rpc_lockd_enable="YES"
       rpc_statd_enable="YES"
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: ansible_system == "FreeBSD"

tasks/workstation/shared/settings/rdp.yml

@@ -15,8 +15,8 @@
       xrdp_enable="YES"
       xrdp_sesman_enable="YES"
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: ansible_system == "FreeBSD"
 
 - name: Workstation | Settings | RDP | FreeBSD | Enable GNOME
@@ -25,8 +25,8 @@
     regexp: 'gnome-session'
     line: 'exec gnome-session # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: ansible_system == "FreeBSD"
 
 - name: Workstation | Settings | RDP | FreeBSD | Disable xterm
@@ -35,6 +35,6 @@
     regexp: 'xterm'
     line: '#exec xterm # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: ansible_system == "FreeBSD"

tasks/workstation/shared/settings/services.yml

@@ -8,13 +8,13 @@
     name: "{{ cups }}"
     pattern: "{{ cups_pattern }}"
     state: started
-    enabled: yes
-  ignore_errors: yes
+    enabled: true
+  ignore_errors: true
 
 - name: General | Software | Services | Enable CUPS-Browse Daemon
   service:
     name: "{{ cups_browse }}"
     pattern: "{{ cups_browse_pattern }}"
     state: started
-    enabled: yes
-  ignore_errors: yes
+    enabled: true
+  ignore_errors: true

tasks/workstation/shared/software/dwm.yml

@@ -17,7 +17,7 @@
       - "{{ make }}"
       - "{{ dmenu }}"
       - "{{ font_awesome }}"
-    update_cache: yes
+    update_cache: true
 
 
 ## Download ##
@@ -26,15 +26,15 @@
   git:
     repo: https://git.suckless.org/dwm
     dest: "{{ dwm_install_dir }}"
-    clone: yes
-    force: yes
+    clone: true
+    force: true
 
 - name: Workstation | Linux | Software | DWM | Git Clone (st)
   git:
     repo: https://git.suckless.org/st
     dest: "{{ st_install_dir }}"
-    clone: yes
-    force: yes
+    clone: true
+    force: true
 
 ## Configuration ##
 
@@ -51,11 +51,11 @@
 
 - name: Workstation | Linux | Software | DWM | Install
   shell: "cd {{ dwm_install_dir }}; {{ make }} clean install"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Workstation | Linux | Software | DWM | Install (st)
   shell: "cd {{ st_install_dir }}; {{ make }} clean install"
-  ignore_errors: yes
+  ignore_errors: true
 
 
 ## X Init Sript ##

tasks/workstation/shared/software/i3.yml

@@ -66,7 +66,7 @@
       - "{{ i3_redshift }}"
       - "{{ i3_redshift_gui }}"
     state: present
-    update_cache: yes
+    update_cache: true
 
 - name: Workstation | Shared | Software | i3 | Install (yay)
   shell: "yay -Qs {{ item }} || yay --noconfirm -S {{ item }}"
@@ -123,7 +123,7 @@
       patterns: "*"        # Wildcard patterns (e.g., "*.log")
       recurse: no          # Set to 'yes' for subdirectories
     register: i3_light_device_check
-    ignore_errors: yes
+    ignore_errors: true
 
   #- name: Display var _ DELETEME
   #  debug:
@@ -132,7 +132,7 @@
   - name: Workstation | Shared | Software | i3 | Light | Pull Backlight Name
     set_fact:
       i3_light_device_name: "{{ i3_light_device_check.files[0].path | basename }}"
-    ignore_errors: yes
+    ignore_errors: true
 
   #- name: Display var - DELETEME
   #  debug:
@@ -147,7 +147,7 @@
       owner: root
       group: root
       mode: '0644'
-    ignore_errors: yes
+    ignore_errors: true
 
   - name: Workstation | Shared | Software | i3 | Light | udev Rules | Reload
     command: "{{ item }}"