Defer the functions which have not been defined yet at this point.

bin-shared/pull_clone.sh

@@ -0,0 +1,66 @@
+#!/usr/bin/env bash
+
+# TBD:
+# - merge into send-master script and use a variable to control push vs pull.
+
+## Variables ##
+
+PROG="$(basename -- "${BASH_SOURCE[0]}")"
+loop=false
+
+DIR="`pwd`"
+dir="`basename $DIR`"
+
+## Validations ##
+
+if [[ "$DIR" != *"-clone" && "$DIR" != *"-SYNC" ]]; then
+   echo "'$DIR' is not labeled as a CLONE or SYNC. Skipping download."
+   exit 0
+fi
+
+# Only pull the existing subdirectories rather than ALL content.
+subdirs_only="false"
+if [[ "$dir" == "music-clone" ]]; then
+   subdirs_only="true"
+fi
+
+## Main ##
+
+echo "`date` - Pulling" \
+   "'$PROD_DATA_USER@$PROD_DATA_HOST:$PROD_DATA_PORT$PROD_DATA_DIR/$dir'" \
+   "to '$dir'."
+
+sleep=0
+while true; do
+   if (( $sleep > 0 )); then
+      echo "Sleeping for '$sleep' seconds..."
+      sleep $sleep
+   fi
+
+   if [[ "$subdirs_only" == "true" ]]; then
+      ls $DIR | while read subdir; do
+         echo -e "\n`date` - Working subdirectory '$subdir'..."
+         clone -e "ssh -p $PROD_DATA_PORT" \
+               $PROD_DATA_USER@$PROD_DATA_HOST:$PROD_DATA_DIR/$dir/$subdir/ \
+               ./$subdir &&
+            echo "`date` - Success!" ||
+            echo "`date` - Failed!"
+      done
+   else
+      clone -e "ssh -p $PROD_DATA_PORT" \
+            $PROD_DATA_USER@$PROD_DATA_HOST:$PROD_DATA_DIR/$dir/ \
+            . &&
+         echo "`date` - Success!" ||
+         echo "`date` - Failed!"
+   fi
+
+   sleep=30
+   if [[ "$loop" == false ]]; then
+      break;
+   fi
+done
+
+## Complete ##
+
+echo -e "\n`date` - $PROG complete."
+exit 0

bin-shared/send_master.sh

@@ -0,0 +1,48 @@
+#!/usr/bin/env bash
+
+# TBD:
+# - add parameter to set loop=true, and accept a value for sleep seconds
+# - allow passing the script a variable for the dir, rather than assuming curr
+
+## Variables ##
+
+PROG="$(basename -- "${BASH_SOURCE[0]}")"
+loop=false
+
+DIR="`pwd`"
+dir="`basename $DIR`"
+
+## Validations ##
+
+if [[ "$DIR" != *"-MASTER" && "$DIR" != *"-SYNC" ]]; then
+   echo "'$DIR' is not labeled as a MASTER or SYNC. Skipping upload."
+   exit 0
+fi
+
+## Main ##
+
+new_dir="${dir//MASTER/clone}"
+
+echo "`date` - Sending '$dir' to" \
+   "'$PROD_DATA_USER@$PROD_DATA_HOST:$PROD_DATA_PORT$PROD_DATA_DIR/$new_dir'"
+
+sleep=0
+while true; do
+   if (( $sleep > 0 )); then
+      echo "Sleeping for '$sleep' seconds..."
+      sleep $sleep
+   fi
+   clone -e "ssh -p $PROD_DATA_PORT" ./ \
+         $PROD_DATA_USER@$PROD_DATA_HOST:$PROD_DATA_DIR/$new_dir &&
+      echo "`date` - Success!" ||
+      echo "`date` - Failed!"
+   sleep=30
+   if [[ "$loop" == false ]]; then
+      break;
+   fi
+done
+
+## Complete ##
+
+echo "`date` - $PROG complete."
+exit 0

rc_shared.sh

@@ -0,0 +1,695 @@
+# Notes:
+# - Please keep this file working for both BASH and ZSH. :)
+
+## Variables ##
+
+# Environment Usability #
+
+export PATH="$PATH:~/bin-shared:~/.bin-shared"
+
+# PS1 Colors #
+
+export PURPLE="`tput setaf 55`"
+export ORANGE="`tput setaf 208`"
+export GREEN="`tput setaf 34`"
+
+export RED="`tput setaf 196`"
+export SCARLET="`tput setaf 160`"
+export YELLOW="`tput setaf 226`"
+
+export GRAY="`tput setaf 243`"
+
+export RESET="`tput sgr0`"
+export BOLD="`tput bold`"
+
+
+## Aliases ##
+
+# Quickies #
+
+alias reload-bash="source ~/.bashrc"
+alias bash-reload="reload-bash"
+alias shell-reload="reload-bash"
+alias reload-shell="reload-bash"
+alias reload="reload-bash"
+
+alias l='ls '
+alias ll='ls -alh '
+alias lh='ls -ash '
+
+function cl {
+	if [[ -d /sdcard ]]; then
+		cd /sdcard/Library/Clones
+	else
+		cd $HOME/Clones
+	fi
+}
+alias clones="cl"
+alias cdl="cl"
+alias cdc="cl"
+
+alias library="clones && cd .."
+alias lib="library"
+
+# Networking #
+
+alias scan="nmap -A -p- --script=vuln "
+
+# Trash Related #
+
+export TRASH_ROOT="/"
+if [[ -d "/sdcard" ]]; then
+	# Android / Termux
+	export TRASH_ROOT="/sdcard"
+else
+	# Desktop
+	export TRASH_ROOT="$HOME"
+fi
+export TRASH="$TRASH_ROOT/TRASH"
+
+alias trash="cd $TRASH"
+
+alias clean-trash="bash -c 'rm -rfv "$TRASH"/*'; clean-trashed"
+alias trash-clean="clean-trash"
+
+alias check-trash='du -h $TRASH | sort -h; find "$TRASH_ROOT" -name .Trash"*" -exec du -h {} \; -exec mv -v {} "$TRASH"/ \;'
+alias trash-check="check-trash"
+
+alias check-trashed='find "$TRASH_ROOT" -name ".trashed*" -exec du -h {} \; -exec mv -v {} "$TRASH"/ \; | sort -h'
+alias clean-trashed='find "$TRASH_ROOT" -name ".trashed*" -exec du -h {} \; -delete | sort -h'
+
+
+## Functions ##
+
+# Related specifically to this project. #
+
+branch="$BRANCH"
+if [[ -z "$branch" ]]; then
+	branch="$PROD_GIT_BRANCH"
+fi
+if [[ -z "$branch" ]]; then
+	branch="dev"
+fi
+
+function update-shared-old {
+   log "`date` - Reloading the '~/.rc_shared' file from env-shared.\n"
+
+	if [[ -n "$1" ]]; then
+		branch="$1"
+	fi
+
+   dir="shared-rc-deleteme"
+
+   git clone https://git.hyperling.com/me/env-shared \
+         $dir --branch=$branch
+
+   mv -v $dir/rc_shared.sh ~/.rc_shared
+
+	local_bin="$HOME/bin"
+	remote_bin="shared-rc-deleteme/bin-shared"
+	if [[ -d "$local_bin" ]]; then
+		log "\n`date` - Found '$local_bin', adding scripts.\n"
+		mv -v $remote_bin/*.sh "$local_bin"/
+
+		refactor_script="refactor_music_library.sh"
+		wget -O "$refactor_script" \
+			https://git.hyperling.com/me/shell-music-refactor-library/raw/branch/main/refactor_music_library.sh
+		mv -v $refactor_script "$local_bin"/
+
+		chmod 755 -Rc "$local_bin"
+	else
+		echo "Did not find '$local_bin', did not copy scripts."
+	fi
+
+	log "\n`date` - Done! Removing git clone.\n"
+   mv -v $dir ~/TRASH/"$dir-`date "+%Y%m%d-%H%M%S"`"
+
+   log "\n`date` - Complete!"
+}
+
+export PROJECT_SHARED="$HOME/.git-env-shared"
+function update-shared2 {
+	# Refresh the local env-shared repo.
+	if [[ -d $PROJECT_SHARED ]]; then
+  		log "`date` - Updating '$PROJECT_SHARED'.\n"
+		git -C "$PROJECT_SHARED" switch "$branch"
+		git -C "$PROJECT_SHARED" pull --recurse-submodules || \
+				( echo "Failed to pull project, exiting." && return 1 )
+	else
+  		log "`date` - Downloading '$PROJECT_SHARED'.\n"
+		git clone https://git.hyperling.com/me/env-shared \
+				"$PROJECT_SHARED" --branch=$branch
+	fi
+
+	# Tha main piece! Reload the shared RC file.
+   cp -v "$PROJECT_SHARED"/rc_shared.sh ~/.rc_shared
+	cp -v "$PROJECT_SHARED"/vimrc.vim ~/.vimrc
+
+	# Copy the scripts from the shared bin to the home bin.
+	local_bin="$HOME/bin"
+	remote_bin="$PROJECT_SHARED/bin-shared"
+	if [[ -d "$local_bin" ]]; then
+		log "\n`date` - Found '$local_bin', adding scripts.\n"
+		cp -v "$remote_bin"/*.sh "$local_bin"/
+
+		refactor_script="refactor_music_library.sh"
+		wget -O "$refactor_script" \
+			https://git.hyperling.com/me/shell-music-refactor-library/raw/branch/main/refactor_music_library.sh
+		mv -v $refactor_script "$local_bin"/
+
+		chmod 755 -Rc "$local_bin"
+	else
+		echo "Did not find '$local_bin', did not copy scripts."
+	fi
+
+   log "\n`date` - Complete!"
+}
+alias shared-update2="update-shared2"
+alias reload-shared2="update-shared2"
+alias shared-reload2="update-shared2"
+
+alias update-shared="update-shared2"
+alias shared-update="update-shared"
+alias reload-shared="update-shared"
+alias shared-reload="update-shared"
+
+function reload-all {
+	log "`date` - Reloading BASH"
+	reload-bash
+
+	log "\n`date` - Reloading Main (Termux/Ansible)"
+	if [[ -d /sdcard ]]; then
+		reload-termux
+	else
+		scm.sh
+	fi
+	reload-bash
+
+	log "\n`date` - Reloading Shared"
+	reload-shared
+	reload-bash
+}
+alias all-reload="reload-all"
+
+function update-all {
+	log "`date` - Updating env projects..."
+	reload-all
+
+	log "\n\n\n`date` - Running system updates..."
+	update -y
+
+	if [[ $(type -t update-sdk 2>/dev/null 1>&2) ]]; then
+		log "\n\n\n`date` - Updating SDKs..."
+		update-sdk
+	fi
+
+	log "\n\n\n`date` - Done with update-all!"
+}
+alias all-update="update-all"
+
+PROJECT_SHARED_OLD01="$HOME/.env-shared"
+if [[ -d "$PROJECT_SHARED_OLD01" ]]; then
+	log "`date` - Removing old project name '$PROJECT_SHARED_OLD01'."
+	mv -v "$PROJECT_SHARED_OLD01" "$TRASH"/env-shared-deleteme | grep -v ".git"
+fi
+
+# Shortcuts #
+
+function send-master { send_master.sh; }
+alias push-master="send-master"
+alias sync-master="send-master"
+
+function pull-clone { pull_clone.sh; }
+alias get-clone="pull-clone"
+alias sync-clone="pull-clone"
+
+alias send-sync="send-master"
+alias push-sync="send-master"
+alias pull-sync="pull-clone"
+alias get-sync="pull-clone"
+function sync-sync {
+	cat <<- EOF
+		Command not implemented, too dangerous guessing the state of the folder.
+
+		Please use push-sync and pull-sync in the correct order for its current state.
+	EOF
+}
+
+function goodbye { update -y; bye; }
+
+function clone {
+   rsync -auPhz --delete --exclude '.gradle' --exclude 'app/build' "$@"
+}
+
+function now { date "+%Y%m%d-%H%M%S"; }
+function today { date "+%Y%m%d"; }
+
+function log {	echo -e "$1"; }
+function blog { echo -e "\n\n$1\n\n"; }
+
+function pull {
+	if [[ -d .git ]]; then
+		git pull --recurse-submodules
+	else
+		pull-clone
+	fi
+}
+
+function push {
+	if [[ -d .git ]]; then
+		git push && eval load-stage && eval load-prod
+	else
+		send-master
+	fi
+}
+
+# Enhance Bin Scripts #
+
+# MASTER and CLONE folders.
+
+function send-masters {
+   echo -e "`date` - Looping through MASTER directories."
+   ls | grep "\-MASTER" | while read dir; do
+      echo -e "\n`date` - Found '$dir'..."
+      cd $dir
+      send-master
+      cd ..
+   done
+   echo -e "\n`date` - Done checking for MASTER directories."
+}
+alias push-masters="send-masters"
+alias sync-masters="send-masters"
+
+function pull-clones {
+   echo -e "`date` - Looping through clone directories."
+   ls | grep "\-clone" | while read dir; do
+      echo -e "\n`date` - Found '$dir'..."
+      cd $dir
+      pull-clone
+      cd ..
+   done
+   echo -e "\n`date` - Done checking for clone directories."
+}
+alias get-clones="pull-clones"
+alias sync-clones="pull-clones"
+
+function sync-all {
+	push-masters
+	echo -e "\n"
+	pull-clones
+
+	echo -e "\n`date` - Skipping SYNC folders! Please do their loads separately."
+   ls | grep "\-SYNC" | while read dir; do
+		echo "- $dir"
+	done
+
+	echo -e "`date` - Done.\n"
+}
+function sync-all-loop {
+	typeset -i sleep_time
+	if [[ "$1" ]]; then
+		sleep_time="$1"
+	fi
+	if [[ -z "$sleep_time" || "$sleep_time" == 0 ]]; then
+		sleep_time="300"
+	fi
+	log "`date` - Sleep timer set for '$sleep_time' seconds."
+	while true; do
+		sync-all
+		echo -e "\n\n*** Sleeping... ***\n\n"
+		sleep 300
+	done
+}
+
+# SYNC folders.
+
+function send-syncs {
+   echo -e "`date` - Looping through SYNC directories."
+   ls | grep "\-SYNC" | while read dir; do
+      echo -e "\n`date` - Found '$dir'..."
+      cd $dir
+      send-master
+      cd ..
+   done
+   echo -e "\n`date` - Done checking for SYNC directories."
+}
+alias push-syncs="send-syncs"
+
+function pull-syncs {
+   echo -e "`date` - Looping through SYNC directories."
+   ls | grep "\-SYNC" | while read dir; do
+      echo -e "\n`date` - Found '$dir'..."
+      cd $dir
+      pull-clone
+      cd ..
+   done
+   echo -e "\n`date` - Done checking for SYNC directories."
+}
+alias get-syncs="pull-syncs"
+
+function sync-syncs {
+	cat <<- EOF
+		Command not implemented, too dangerous guessing the state of the folder.
+
+		Please use push-syncs and pull-syncs in the correct order for its current state.
+	EOF
+}
+
+# Audio #
+
+# Video #
+
+# Optimize the bitrate and audio levels for an edited video.
+function process-video-usage {
+	echo "USAGE: process-video oldFile newFile [videoBitrate] [audioBitrate] [sizeRating] [numPasses] [forceBitrate]"
+	echo -n "Purpose: Call ffmpeg with preferred video posting settings. "
+	echo -n "Bitrates default to 2000k and 192k, size is 720, passes is 1, and force is N."
+	echo "These work well on Odysee and are fairly small as backups."
+	echo "Examples:"
+	echo "- Create a small file for quick streaming."
+	echo "    process-video youcut.mp4 20240210.mp4 1200k 128k 480"
+	echo "- Create a larger file for something like YouTube."
+	echo "    process-video youcut.mp4 20240210_1080p.mp4 5000k 256k 1080"
+}
+function process-video {
+	# Parameters
+	file="$1"
+	newfile="$2"
+	video="$3"
+	audio="$4"
+	size="$5"
+	passes="$6"
+	force="$7"
+
+	# Validations
+	if [[ -z $file || ! -e $file ]]; then
+		echo "ERROR: Original file '$file' does not exist." >&2
+		process-video-usage
+		return 1
+	fi
+
+	if [[ -z $newfile ]]; then
+		echo "ERROR: New file's name must be provided." >&2
+		process-video-usage
+		return 1
+	elif [[ -e $newfile ]]; then
+		echo "ERROR: New file '$newfile' already exists." >&2
+		du -h "$newfile"
+		process-video-usage
+		return 1
+	fi
+
+	echo "`date` - Converting '$file' to '$newfile'."
+
+	if [[ -z $video ]]; then
+		video="2000k"
+	fi
+	if [[ $force == "Y" ]]; then
+		video="-b:v $video"
+	else
+		video="-b:v $video -minrate 0 -maxrate $video -bufsize $video"
+	fi
+
+	if [[ -z $audio ]]; then
+		audio="192k"
+	fi
+	audio="-b:a $audio"
+
+	if [[ -z $size ]]; then
+		size="720"
+	fi
+	size="-filter:v scale=-1:$size"
+
+	if [[ -z $passes ]]; then
+		passes=1
+	fi
+	pass=""
+	if [[ $passes != 1 ]]; then
+		passes=2
+		pass="-pass 2"
+	fi
+
+	## Main ##
+	# More information on two-pass processing with ffmpeg
+	# https://cinelerra-gg.org/download/CinelerraGG_Manual/Two_pass_Encoding_with_FFmp.html
+	if [[ $passes == 2 ]]; then
+		set -x
+		ffmpeg -nostdin -hide_banner -loglevel quiet \
+			-i "$file" $size $video $audio \
+			-filter:a "dynaudnorm=f=33:g=65:p=0.66:m=33.3" \
+			-vcodec libx264 -movflags +faststart \
+			-pass 1 -f mp4 /dev/null -y
+		status=$?
+		set +x
+		echo "`date` - Done with the first pass."
+		if [[ $status != 0 ]]; then
+			echo "Received unsuccessful status, exiting."
+			return 1
+		fi
+	fi
+
+	set -x &&
+	ffmpeg -nostdin -hide_banner -loglevel quiet \
+		-i "$file" $size $video $audio \
+		-filter:a "dynaudnorm=f=33:g=65:p=0.66:m=33.3" \
+		-vcodec libx264 -movflags +faststart \
+		$pass "$newfile"
+	status="$?"
+	set +x
+	echo "`date` - Done with the final pass."
+
+	if [[ $passes == 2 && $status == 0 ]]; then
+		mv -v ffmpeg2pass*.log* ~/TRASH/
+	fi
+
+	echo "`date` - Syncing data."
+	sync
+	sleep 10
+	sync
+
+	if [[ -s $newfile ]]; then
+		echo "`date` - Getting file sizes."
+		du -h "$file"
+		du -h "$newfile"
+	else
+		echo "ERROR: New file not created or has a 0 size." >&2
+	fi
+
+	echo -e "\n`date` - Finished with status '$status'."
+	return $status
+}
+alias pv="process-video"
+alias qpv='pv ./raw/YouCut*.mp4 $(basename `pwd`).mp4'
+
+# Allow converting video to audio and other smaller
+# tasks than what process-video is intended to do.
+function basic-process-usage {
+	echo "basic-process INPUT OUTPUT NORMALIZE [EXTRA]"
+	echo -n "Pass a file through ffmpeg with the option"
+	echo "to easily normalize the audio with a Y."
+	echo "Examples:"
+	echo "- Normalize audio on a video."
+	echo "    basic-process video.mp4 normalized.mp4 Y"
+	echo "- Convert a video to audio at 192k."
+	echo "    basic-process video.mp4 audio.mp3 N '-b:a 192k'"
+}
+function basic-process {
+	# Parameters
+	input="$1"
+	output="$2"
+	typeset -u normalize
+	normalize="$3"
+	extra="$4"
+
+	echo "`date` - Starting basic-process"
+
+	# Validations
+	if [[ -z $input || ! -e $input ]]; then
+		echo "ERROR: Input file '$input' does not exist." >&2
+		basic-process-usage
+		return 1
+	fi
+
+	if [[ -z $output ]]; then
+		echo "ERROR: Output file's name must be provided." >&2
+		basic-process-usage
+		return 1
+	elif [[ -e $output ]]; then
+		echo "ERROR: Output file '$output' already exists." >&2
+		du -h "$output"
+		basic-process-usage
+		return 1
+	fi
+
+	if [[ $normalize == "Y" ]]; then
+		echo "Normalize set to TRUE."
+		normal="-filter:a dynaudnorm=f=33:g=65:p=0.66:m=33.3"
+	else
+		echo "No audio normalization is being done."
+	fi
+
+	# Main
+	echo "`date` - Converting '$input' to '$output'."
+	set -x
+	ffmpeg -nostdin -hide_banner -loglevel quiet \
+		-i "$input" $extra $normal "$output"
+	status=$?
+	set +x
+
+	if [[ $status != 0 ]]; then
+		echo "`date` - WARNING: ffmpeg exited with status '$status'." >&2
+	fi
+
+	# Finish
+	if [[ ! -s $output ]]; then
+		echo "`date` - ERROR: Output '$output' not created or has 0 size." >&2
+		return 1
+	fi
+
+	sync
+	echo "`date` - '$output' has been created successfully."
+	sleep 3
+	du -h "$input"
+	du -h "$output"
+
+	echo "`date` - Finished basic-process"
+	return 0
+}
+alias bp="basic-process"
+alias bv="bp"
+
+# Function to automatically append the Y.
+function fix-audio { basic-process "$1" "$2" Y; }
+function eq { fix-audio "$1" "$2"; }
+
+# Function to easily turn a video to audio without typing the audio name.
+function convert-to-audio {
+	video="$1"
+	audio="$2"
+	if [[ -z "$2" || "$2" == "Y" ]]; then
+		audio="${1//mp4/mp3}"
+	fi
+	volume=""
+	if [[ ( "$2" == "Y" && -z "$3" ) || "$3" == "Y" ]]; then
+		$volume="Y"
+	fi
+	basic-process "$video" "$audio" $volume
+}
+alias v2a="convert-to-audio"
+alias vta="v2a"
+alias pull-audio="v2a"
+alias pa="v2a"
+
+
+### Web ###
+
+function download-website {
+	website="$1"
+	if [[ -z "$website" ]]; then
+		echo "ERROR: Website not provided. $website"
+		return
+	fi
+	if [[ "$website" != "http"* ]]; then
+		website="http://$website"
+	fi
+	# https://simpleit.rocks/linux/how-to-download-a-website-with-wget-the-right-way/
+	# Does not simplify the links for offline usage.
+	# wget --wait=2 \
+	#     --level=inf \
+	#     --limit-rate=20K \
+	#     --recursive \
+	#     --page-requisites \
+	#     --user-agent=Mozilla \
+	#     --no-parent \
+	#     --convert-links \
+	#     --adjust-extension \
+	#     --no-clobber \
+	#     -e robots=off \
+	#     $website &&
+
+	# https://www.digitalcitizen.life/how-to-download-entire-website-for-offline-viewing/
+	# This one is supposed to work too and is much smaller.
+	# wget --mirror  \
+	#     --convert-links \
+	#     --adjust-extension \
+	#     --page-requisites \
+	#     --no-parent \
+	#     $website &&
+
+	# Combine the two by using mirow and removing the rate limit.
+	wget --mirror \
+		--wait=2 \
+		--level=inf \
+		--recursive \
+		--page-requisites \
+		--user-agent=Mozilla \
+		--no-parent \
+		--convert-links \
+		--adjust-extension \
+		--no-clobber \
+		-e robots=off \
+		--timeout=15 \
+		--tries=0 \
+		--continue \
+		--waitretry=5 \
+		--random-wait \
+		$website &&
+	{
+		echo -e "\nSuccess!"
+	} || {
+		echo -e "\nERROR: Command reported a failure. (Error code '$?')"
+		echo "This may mean that the URL was not converted to local links."
+		echo "Please check the error and contents and try again if needed."
+	}
+}
+alias website-download="download-website"
+alias curl-site="download-website"
+alias pull-site="download-website"
+alias curl-www="download-website"
+alias pull-www="download-website"
+alias www-pull="download-website"
+
+
+## Finalize ##
+
+# Export all functions! #
+eval "$(declare -F | grep -v _ | sed 's/-f /-fx /')"
+
+# Run update checker in background.
+(
+	(
+		if [[ -d "$PROJECT_SHARED" ]]; then
+			git -C "$PROJECT_SHARED" fetch >/dev/null 2>&1 \
+				&& git -C "$PROJECT_SHARED" status \
+				| grep "is behind" \
+			| while read status; do
+				title=TBD
+				message=TBD
+				success=0
+				reload-shared || success=1
+				if [[ "$success" == 0 ]]; then
+					title="env-shared Updated"
+					message="Reloaded automatically, please reload BASH. :)"
+				else
+					title="env-shared Updates Available"
+					message="Update with 'reload-shared'."
+				fi
+				if [[ -d /sdcard ]]; then
+					termux-notification \
+						-t "$title" \
+						-c "$message"
+				else
+					notify-send "$title" "$message"
+				fi
+			done
+		fi
+	) >> "$HOME"/Reports/env-shared.log.txt 2>&1 &
+)
+
+
+## Complete! ##
+
+[[ $(whoami) != "root" ]] &&
+   echo "`date` - Shared RC Config - Complete!"
+
+export _LOADED_SHARED_RC=true

vimrc.vim

@@ -0,0 +1,11 @@
+" Turn off syntax, flashy lights, etc. Make VIM into a basic editor.
+syntax off
+set nohlsearch
+set noautoindent noautowrite noshowmatch wrapmargin=0 report=1 ts=3
+set ignorecase
+
+" Turn off auto-commenting.
+autocmd Filetype * set fo-=c fo-=r fo-=o
+
+" qq shortcut for immediately exiting all files without saving.
+nnoremap qq :qa!<cr>