From 203bc6f63e427c25638a193354467c610ae4b203 Mon Sep 17 00:00:00 2001 From: Hyperling Date: Wed, 29 Oct 2025 21:21:26 -0700 Subject: [PATCH] Finish th recipe by adding the last TBD. Add the coordinates of the points. --- WIP/wooden-camping-chair.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/WIP/wooden-camping-chair.md b/WIP/wooden-camping-chair.md index 0b51c78..f932579 100644 --- a/WIP/wooden-camping-chair.md +++ b/WIP/wooden-camping-chair.md @@ -105,6 +105,12 @@ The 9 inch base tends to wobble a bit. This helps it be much sturdier. 1. At the bottom of the back board, measure in 2 inches from each side and mark these points. (POINTS 1 and 2) 1. Find the middle of the board, around 4.5 to 4.6 inches, and mark it vertically. 1. Measure up 1.5 inches from the center vertical line and mark horizontally. (POINT 3) -1. Measure in {TBD/TODO} inches from each side and mark them vertically (POINTS 4 and 5) +1. Measure in 3 inches from each side and mark them vertically (POINTS 4 and 5) 1. Draw lines from P1 to P4, P2 to P5, and then from P4 to P5 which should pass through POINT 3. See the diagram. 1. You now have your cutting lines. I used a circular saw to fo P1 to P4 and P2 to P5, then a folding saw to start cutting out pieces and eventuallymake it from P4 to P5. A jigsaw would probably work great. + +P1: (2, 0) +P2: (7, 0) +P3: (4.5, 1.5) +P4: (3, 1.5) +P5: (6, 1.5)