Add icons for recent non-video articles.

content/posts/guides/tech/20260906-artix-on-newer-hardware.md

@@ -3,7 +3,7 @@ draft: false
 pinned: false
 hidden: false
 title: "Artix Installation ISO"
-subtitle: "Resolving Calamares Issues"
+subtitle: "Resolving Calamares Issue"
 feathericon: "hard-drive"
 author: Hyperling
 started: 2026-09-06T12:00:00-07:00
@@ -39,14 +39,22 @@ aliases:
 
 ## Intro
 
-Artix's installer runs fine on my mid 2010s Macbook Air, but on my early 2020s NovaCustom the Calamares installer was hanging at Gathering System Requirements. Here's how I got around it.
+Artix's installer runs fine on my mid 2010s Macbook Air
+, but on my early 2020s NovaCustom the Calamares installer was hanging at 'Gathering System Requirements' as soon as it opened.
+
+Rather than use the CLI installer for doing all the disk encryption and other setup
+, I chose to resolve these issues so that the environment is as identical as possible to my other laptop.
+
+Here's how I ended up getting around it.
 
 ## Steps
 
-1. Create bootable media with a GUI installer as you normally would, such as ```sudo dd if=./artix-cinnamon-runit-YYYYMMDD.iso of=/your/device bs=4M status=progress && sync```
+1. Create bootable media with a GUI installer as you normally would
+, such as ```sudo dd if=./artix-cinnamon-runit-YYYYMMDD.iso of=/your/device bs=4M status=progress && sync```
 2. Restart the system and boot the media.
 3. Key down to CD/DVD/ISO option and press `e`.
-4. Add `nomodeset` and `modprobe.blacklist=wl` to the kernel options. ```setparams 'From CD/DVD/ISO: artix.x86_64 ' 'x86_64 nomodeset modprobe.blacklust=wl lang=en_US keytable=us tz=UTC ...```
+4. Add `nomodeset` and `modprobe.blacklist=wl` to the kernel options.
+    ```setparams 'From CD/DVD/ISO: artix.x86_64 ' 'x86_64 nomodeset modprobe.blacklust=wl lang=en_US keytable=us tz=UTC ...```
 5. Press `ctrl+x` to save and launch the script.
 6. Allow the media to boot the desktop environment.
 7. Try the GUI installer and hopefully it's ready to go.