me/hugo-recipes
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Reformat the tool and ingredient section.

Browse Source
This commit is contained in:
Hyperling
2025-11-05 06:34:35 -07:00
parent 55f27e21fe
commit d9190236b8
1 changed files with 24 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
content/posts/wooden-camping-chair.md
View File

@@ -13,11 +13,31 @@ date: "2025-09-15"
[HyperVegan | Wooden Camping Chair](https://odysee.com/@HyperVegan:2/20251104-HyperVegan-WoodenCampingChair:9)
## "Ingredients"
## What You'll Need
8ft long 2x10 (about $20 USD at Home Depot) : [`example`](https://www.homedepot.com/p/2-in-x-10-in-x-8-ft-2-Premium-Grade-Fir-Dimensional-Lumber-915564/206182030)
### "Ingredients"
I used a circular saw on the long cuts and corner cuts, otherwise it was a folding saw and hand axe. A jigsaw would have been great. I've also helped someone who used an oscillating saw.
- 8ft long 2x10 (about $20 USD at Home Depot)
- [`example`](https://www.homedepot.com/p/2-in-x-10-in-x-8-ft-2-Premium-Grade-Fir-Dimensional-Lumber-915564/206182030)
- 8 2.5in wood screws
- [`example`](https://www.homedepot.com/p/DECKMATE-9-2-1-2-in-Black-Exterior-Self-Starting-Star-Drive-Flat-Head-Deck-Screw-1-lb-87-Piece-115923/313358323)
### Tools
- circular saw
- jigsaw
- or oscillating saw
- or wood boring spade bit + folding saw
- or anything else which can sculpt holes
- drill
- 1/8in drill bit or similar (for wood screw pilot holes)
- bit for your woodscrews (such as t25 star drive or phillips)
I used a circular saw on the long cuts and corner cuts, otherwise on my first chair I only had a folding saw and hand axe to bore out the seat hole.
A jigsaw would have been great and I purchased one shortly thereafter. I've also helped someone who used an oscillating saw.
I've tried using a reciprocating saw but it did not seem precise enough for this project.
## Basic Cuts
@@ -151,7 +171,7 @@ P5 (6, 1.5)
1. Measure up 1.5 inches from the center vertical line and mark horizontally. (POINT 3)
1. Measure in 3 inches from each side and mark them vertically (POINTS 4 and 5)
1. Draw lines from P1 to P4, P2 to P5, and then from P4 to P5 which should pass through POINT 3. See the diagram.
1. You now have your cutting lines. I used a circular saw to fo P1 to P4 and P2 to P5, then a folding saw to start cutting out pieces and eventuallymake it from P4 to P5. A jigsaw would probably work great.
1. You now have your cutting lines. I used a circular saw to do P1 to P4 and P2 to P5, then a folding saw to start cutting out pieces and eventually make it from P4 to P5. A jigsaw would probably work great.
## Optional: Storage & Carrying Case