llm, attempt to fix decimal values which are supposed to be integers, fix some spacing.

.ansible-lint

@@ -0,0 +1,22 @@
+# .ansible-lint
+---
+skip_list:
+  - command-instead-of-shell
+  - key-order[task]
+  - yaml[line-length]
+  - yaml[colons]
+  - jinja[spacing]
+  - name[missing]
+  - yaml[comments]
+  - yaml[commas]
+  - var-naming[pattern]
+
+warn_list:
+  - literal-compare
+  - ignore-errors
+  - no-changed-when
+  - yaml[indentation]
+  - risky-file-permissions
+  - risky-shell-pipe
+  - fqcn[action-core]
+  - fqcn[action]

README.md

@@ -17,17 +17,27 @@ This information is as of 2025-11-21.
 
 ### Primary
 
-These are the operating systems used as my daily driver.
+These are the operating systems used as my dailies.
+
+#### Artix (`runit`)
+
+2026-08-04: Completed adapting playbooks and now using this as a daily driver.
+
+2026-07-31: Began experimenting and adapting playbooks using VMs.
 
 #### Debian Trixie
 
 This has been used as my primary server and workstation OS since at least 2024.
+
 The `apt` version of `ansible` in both Bookworm and Trixie are sufficient,
 no longer need to use `ansible` out of `pip`.
 
+Stopped using as a workstation on all devices by August 2026, still using as a server.
+
 ### Secondary
 
-These are tested via my Docker project's `ProvisionsTests` container but not currently used as daily drivers.
+These are tested via my Docker project's `ProvisionsTests` containers
+but not currently used as daily drivers. [TBD: Link]()
 
 #### Arch
 
@@ -54,6 +64,14 @@ TBD
 100%, but only if using a recent enough version of Ansible. `pip` usually has a
 better version than `apt`.
 
+#### Devuan (`runit`)
+
+2026-09-14: Abandoned, did not support virtualization on runit and felt slow / clunky to Artix.
+
+2026-08-13: Distribution is nearly fully dunctional.
+
+2026-07-30: Distribution has beed added with a few caveats:
+
 #### Ubuntu
 
 100%, both server and desktop.
@@ -88,14 +106,14 @@ terrible while updating. Ubuntu Rolling Rhino filled the gap.
 Workstation: 100%,
 Server: 100%
 
-## Suse Family
+### Suse Family
 
-### openSUSE Tumbleweed v2022-02-17
+#### openSUSE Tumbleweed v2022-02-17
 
 Generic: 100%,
 Workstation: 100%
 
-### openSUSE Leap 15.4
+#### openSUSE Leap 15.4
 
 Generic: 100%
 Workstation: Currently failing at `[Workstation | Linux | Flatpak Distro | Package Manager | Install From Repo]` with message `Problem: nothing provides libedataserver-1.2.so.24 needed by the to be installed evolution-data-server-32bit-3.34.4-3.3.1.x86_64`.
@@ -127,6 +145,8 @@ after update problems due to a long computer hiatus.
 
 Specifically for the Pinephone.
 
+## Unsupported
+
 ## Future Goals
 
 Eventually some of the scripts and install files will be put into the files

ansible.cfg

@@ -1,6 +1,7 @@
 [defaults]
 inventory=hosts
 interpreter_python=auto_silent
+inject_facts_as_vars=True
 
 [inventory]
 localhost_warning=False

facts/general/gather.yml

@@ -2,17 +2,16 @@
 # Facts that must be gathered after running tasks.
 
 - name: General | Facts | Gather | Locate bash
-  shell: which bash
+  ansible.builtin.shell: which bash
   register: bash_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Gather | Locate ansible-pull
-  shell: which ansible-pull
+  ansible.builtin.shell: which ansible-pull
   register: ansible_pull_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Gather | Locate zsh
-  shell: which zsh
+  ansible.builtin.shell: which zsh
   register: zsh_exec
-  ignore_errors: yes
-
+  ignore_errors: true

facts/general/package.yml

@@ -3,23 +3,34 @@
 # This file is for ALL systems and should not include UI components.
 
 - name: General | Facts | Package | Shared Defaults
-  set_fact:
+  ansible.builtin.set_fact:
     sshfs: sshfs
     tar: tar
     iftop: iftop
     nethogs: nethogs
     ntp_server: chrony
     dig: dig
-    neofetch: neofetch
+    neofetch: fastfetch
+    lightdm: lightdm
+    sddm: sddm
+    tmux: tmux
+    base_devel: htop # Placeholder for Arch package.
+    sendmail: msmtp
+    sendmail_mta: msmtp-mta
+    ca_certificates: ca-certificates
+    locate: mlocate
+    alsa: alsa-utils
+    stress: stress
+    jq: jq
 
 - name: General | Facts | Package | Parrot OS Fixes
-  set_fact:
+  ansible.builtin.set_fact:
     ansible_pkg_mgr: "apt"
     ansible_python_interpreter: "/usr/bin/python3"
   when: ansible_distribution == "Parrot OS"
 
 - name: General | Facts | Package | apt
-  set_fact:
+  ansible.builtin.set_fact:
     locate: locate
     opensshd: openssh-server
     microcode_amd: amd64-microcode
@@ -29,23 +40,20 @@
     dig: dnsutils
   when: ansible_pkg_mgr == "apt"
 
-- name: General | Facts | Package | apt | Debian Trixie
-  set_fact:
-    neofetch: fastfetch
-  when: ansible_pkg_mgr == "apt" and ansible_distribution_release == "trixie"
-
 - name: General | Facts | Package | pacman
-  set_fact:
+  ansible.builtin.set_fact:
     locate: mlocate
     opensshd: openssh
     microcode_amd: linux-firmware
     microcode_intel: intel-ucode
     cron: cronie
     encfs: encfs
+    dig: bind
+    base_devel: base-devel
   when: ansible_pkg_mgr == "pacman"
 
 - name: General | Facts | Package | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     sshfs: fusefs-sshfs
     locate: htop # Placeholder to prevent errors, locate built into FreeBSD.
     opensshd: htop # sshd comes installed on FreeBSD
@@ -56,13 +64,13 @@
     encfs: fusefs-encfs
   when: ansible_system == "FreeBSD"
 
-- name: General | Facts | Package | dnf (Fixes) # TBD: Fix + test package names: mlocate, dig, neofetch
-  set_fact:
+- name: General | Facts | Package | dnf (Fixes)
+  ansible.builtin.set_fact:
     ansible_pkg_mgr: dnf
   when: ansible_pkg_mgr in ("dnf5")
 
 - name: General | Facts | Package | dnf
-  set_fact:
+  ansible.builtin.set_fact:
     sshfs: fuse-sshfs
     locate: plocate
     opensshd: openssh
@@ -70,39 +78,37 @@
     microcode_intel: microcode_ctl
     cron: cronie
     encfs: fuse-encfs
+    dig: bind-utils
+    sendmail_mta: msmtp
   when: ansible_pkg_mgr == "dnf"
 
 - name: General | Facts | Package | zypper
-  set_fact:
+  ansible.builtin.set_fact:
     locate: plocate
     opensshd: openssh
     microcode_amd: ucode-amd
     microcode_intel: ucode-intel
     cron: cronie
     encfs: encfs
+    dig: bind-utils
   when: ansible_pkg_mgr == "zypper"
 
 
 - name: General | Facts | Package | Update Command | Helpers
-  set_fact:
+  ansible.builtin.set_fact:
     update_accept_var: '$accept'
     nix_days: 14
     ansible_distribution_file: "{{ prov_dir }}/ansible_distribution.txt"
     ansible_pkg_mgr_file: "{{ prov_dir }}/ansible_pkg_mgr.txt"
 
-- name: General | Facts | Package | Update Command | Helpers | pacman
-  set_fact:
-    update_accept_var: '--noconfirm'
-  when: ansible_pkg_mgr == "pacman"
-
 - name: General | Facts | Package | Update Command | Store Variables
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "echo '{{ ansible_distribution }}' > {{ ansible_distribution_file }}"
     - "echo '{{ ansible_pkg_mgr }}' > {{ ansible_pkg_mgr_file }}"
 
 - name: General | Facts | Package | Update Command
-  set_fact:
+  ansible.builtin.set_fact:
     update_package_manager: |
 
       distribution="`cat {{ ansible_distribution_file }}`"
@@ -148,11 +154,22 @@
 
         pacman)
           echo "*** Pacman ***"
-          if [[ "$accept" == "Y" ]]; then
-            auto_accept="{{ update_accept_var }}"
+          auto_accept="{{ update_accept_var }}"
+          if [[ "$auto_accept" == "-y" ]]; then
+            auto_accept="--noconfirm"
           fi
-          sudo pacman -Syyu $auto_accept ||
+
+          sudo pacman -Syu $auto_accept --overwrite '/usr/lib/node_modules/*' ||
           return 1
+          echo -e "\n"
+
+          if [[ "$LOGNAME" != "root" ]]; then
+            echo "*** AUR (yay) ***"
+            yay --sudoloop -Syu $auto_accept || return 2
+          else
+            echo "*** User is root, skipping AUR (yay) ***"
+          fi
+          echo -e "\n"
         ;;
 
         pkg | pkgng)
@@ -243,40 +260,45 @@
           fi
         ;;
       esac
-# End of update_package_manager
+    update_npm: |
+      if [[ `which npm` ]]; then
+        echo "*** NPM ***" &&
+        sudo npm update -g
+        echo -e "\n"
+      fi
 
 # Flatpaks
 - name: General | Facts | Package | Update Command | Flatpak | Check
-  shell: which flatpak
+  ansible.builtin.shell: which flatpak
   register: flatpak_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Package | Update Command | Flatpak | Exists
-  set_fact:
+  ansible.builtin.set_fact:
     update_flatpak: |
       echo "*** Flatpak ***"
-      [[ -n {{ update_accept_var }} ]] && sudo flatpak repair
-      sudo flatpak uninstall --unused {{ update_accept_var }} &&
-      sudo flatpak update {{ update_accept_var }} ||
+      [[ -n "$accept" ]] && sudo flatpak repair
+      sudo flatpak uninstall --unused $accept &&
+      sudo flatpak update $accept ||
       return 1
   when: flatpak_exec is defined
     and flatpak_exec.failed is defined
     and not flatpak_exec.failed
 
 - name: General | Facts | Package | Update Command | Flatpak | Missing
-  set_fact:
+  ansible.builtin.set_fact:
     update_flatpak: |
       echo "*** Flatpak Not Installed ***"
   when: update_flatpak is not defined
 
 # Firmware
 - name: General | Facts | Package | Update Command | Firmware | Check
-  shell: which fwupdmgr
+  ansible.builtin.shell: which fwupdmgr
   register: fwupdmgr_exec
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Facts | Package | Update Command | Firmware | Exists
-  set_fact:
+  ansible.builtin.set_fact:
     update_firmware: |
       echo "*** Firmware ***"
       sudo fwupdmgr refresh --force &&
@@ -288,7 +310,7 @@
     and not fwupdmgr_exec.failed
 
 - name: General | Facts | Package | Update Command | Firmware | Missing
-  set_fact:
+  ansible.builtin.set_fact:
     update_firmware: |
       echo "*** Firmware Updater (fwupdmgr) Not Installed ***"
   when: update_firmware is not defined

facts/general/service.yml

@@ -2,7 +2,7 @@
 # Definitions for service management.
 
 - name: General | Facts | Service | All
-  set_fact:
+  ansible.builtin.set_fact:
     cups: cups
     cups_pattern: cupsd
     cups_browse: cups-browsed
@@ -18,19 +18,19 @@
     bluetooth_pattern: bluetooth
 
 - name: General | Facts | Service | Arch Linux
-  set_fact:
+  ansible.builtin.set_fact:
     crond: cronie
     crond_pattern: cronie
-  when: ansible_distribution in ("Archlinux")
+  when: ansible_pkg_mgr == "pacman"
 
 - name: General | Facts | Service | Fedora
-  set_fact:
+  ansible.builtin.set_fact:
     crond: crond
     crond_pattern: crond
   when: ansible_distribution in ("Fedora")
 
 - name: General | Facts | Service | Ubuntu Linux
-  set_fact:
+  ansible.builtin.set_fact:
     sshd: ssh
     sshd_pattern: ssh
   when: ansible_distribution == "Ubuntu"

facts/general/system.yml

@@ -1,41 +1,62 @@
 ---
 # Define file, folder, and other facts per OS.
 
-- name: General | Facts | System | Global
-  set_fact:
-    lynis_install_dir: /usr/local/src/lynis
-    dwm_install_dir: /usr/local/src/dwm
-    st_install_dir: /usr/local/src/st
+- name: General | Facts | System | Global 01
+  ansible.builtin.set_fact:
+    global_src: /usr/local/src
     global_bin: /usr/local/bin
     x_desktops: /usr/share/xsessions
-    git_repo_http: https://{{ git_host }}/{{ git_user }}/{{ git_project }}
-    git_repo_ssh: ssh://git@{{ git_host }}:{{ git_ssh_port }}/{{ git_user }}/{{ git_project }}
+    git_repo_http: "https://{{ git_host }}/{{ git_user }}/{{ git_project }}"
+    git_repo_ssh: "ssh://git@{{ git_host }}:{{ git_ssh_port }}/{{ git_user }}/{{ git_project }}"
+    notify_log: "ansible.notify.log"
+    runit_script_dir: /etc/runit/sv
+    runit_service_dir: /etc/runit/runsvdir/default
+    runit_service_script: run
+    runit_log_dir: log
+    global_log: /var/log
+    global_log_config: config
 
+- name: General | Facts | System | Global 02
+  ansible.builtin.set_fact:
+    shared_rc_install_dir: "{{ global_src }}/env-shared"
+    notify_log_file: "/var/log/{{ notify_log }}"
+    notify_log_file_wip: "/tmp/{{ notify_log }}.wip"
+    lynis_install_dir: "{{ global_src }}/lynis"
+    dwm_install_dir: "{{ global_src }}/dwm"
+    st_install_dir: "{{ global_src }}/st"
+    runit_log_script: "{{ runit_service_script }}"
+
+- name: General | Facts | System | Global 03
+  ansible.builtin.set_fact:
+    shared_rc_bin: "{{ shared_rc_install_dir }}/bin-shared"
 
 - name: General | Facts | System | Linux
-  set_fact:
+  ansible.builtin.set_fact:
     rc_conf: /dev/null
     sudoers_install_dir: /etc/sudoers.d/
     sudoers_config: /etc/sudoers
     shutdown_command: sudo shutdown -h now
   when: ansible_system == "Linux"
 
-
 - name: General | Facts | System | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     rc_conf: /etc/rc.conf
     sudoers_install_dir: /usr/local/etc/sudoers.d/
     shutdown_command: sudo shutdown -p now
   when: ansible_system == "FreeBSD"
 
-
 - name: General | Facts | System | Report File Names
-  set_fact:
+  ansible.builtin.set_fact:
     lynis_report: "lynis_hardness_check.txt"
     nmap_report: "nmap_port_check.txt"
 
-
 - name: General | Facts | System | Ansible Branch
-  set_fact:
+  ansible.builtin.set_fact:
     branch: main
   when: branch is not defined
+
+- name: General | Facts | System | runit (Devuan)
+  ansible.builtin.set_fact:
+    runit_script_dir: /etc/sv
+    runit_service_dir: /etc/service
+  when: ansible_pkg_mgr == "apt"

facts/general/user.yml

@@ -2,12 +2,12 @@
 # Define users and groups per OS type.
 
 - name: General | Facts | User | Linux
-  set_fact:
+  ansible.builtin.set_fact:
     root_group: root
   when: ansible_system == "Linux"
 
 
 - name: General | Facts | User | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     root_group: wheel
   when: ansible_system == "FreeBSD"

facts/miner/config.yml

@@ -4,10 +4,10 @@
 ## Load Config File ##
 
 - name: Miner | Facts | Config File | Download
-  shell: "scp {{ file_server }}:{{ config_file_remote }} {{ config_file_local }}; chmod 700 {{ config_file_local }}"
+  ansible.builtin.shell: "scp {{ file_server }}:{{ config_file_remote }} {{ config_file_local }}; chmod 700 {{ config_file_local }}"
 
 - name: Miner | Facts | Config File | Load Wallets
-  set_fact:
+  ansible.builtin.set_fact:
     wallet_xmr: "{{ lookup('ini', 'xmr section={{config_section_wallet}} file={{config_file_local}}') }}"
     wallet_eth: "{{ lookup('ini', 'eth section={{config_section_wallet}} file={{config_file_local}}') }}"
 
@@ -15,9 +15,9 @@
 ## Verify ##
 
 - name: Miner | Facts | Config File | DEBUG
-  debug:
+  ansible.builtin.debug:
     var: "{{ item }}"
-  loop: 
+  loop:
     - wallet_xmr
     - wallet_eth
 
@@ -25,4 +25,4 @@
 ## Clean Up ##
 
 - name: Miner | Facts | Config File | Delete
-  shell: "mv {{ config_file_local }} ~/TRASH/"
+  ansible.builtin.shell: "mv {{ config_file_local }} ~/TRASH/"

facts/miner/pool.yml

@@ -2,7 +2,7 @@
 # Create arrays of pools per coin.
 
 - name: Miner | Facts | Pools
-  set_fact:
+  ansible.builtin.set_fact:
     nanopool_xmr:
       - { "priority": 1, "name": "xmr-us-east1.nanopool.org:14433" }
       - { "priority": 2, "name": "xmr-us-west1.nanopool.org:14433" }
@@ -34,7 +34,7 @@
 # CPU #
 
 - name: Miner | Facts | Pools | Set GPU to Nanopool Eth
-  set_fact:
+  ansible.builtin.set_fact:
     cpu_pool: "{{ nanopool_xmr }}"
   when: nanominer_cpu == "xmr" and nanominer_cpu_pool == "nanopool"
 
@@ -42,26 +42,26 @@
 # GPU #
 
 - name: Miner | Facts | Pools | Set GPU to Nanopool Eth
-  set_fact:
+  ansible.builtin.set_fact:
     gpu_pool: "{{ nanopool_eth }}"
   when: nanominer_gpu == "eth" and nanominer_gpu_pool == "nanopool"
 
 - name: Miner | Facts | Pools | Set GPU to Etherpool Eth
-  set_fact:
+  ansible.builtin.set_fact:
     gpu_pool: "{{ ethermine_eth }}"
   when: nanominer_gpu == "eth" and nanominer_gpu_pool == "etherpool"
 
 - name: Miner | Facts | Pools | Set GPU to F2Pool Eth
-  set_fact:
+  ansible.builtin.set_fact:
     gpu_pool: "{{ f2pool_eth }}"
   when: nanominer_gpu == "eth" and nanominer_gpu_pool == "f2pool"
-  
+
 
 
 ## Validate ##
 
 - name: Miner | Facts | Pools | DEBUG
-  debug:
+  ansible.builtin.debug:
     var: "{{ item }}"
   loop:
     - cpu_pool

facts/miner/system.yml

@@ -4,21 +4,21 @@
 ## Global ##
 
 - name: Miner | Facts | System | Global 1
-  set_fact:
+  ansible.builtin.set_fact:
     file_server: '{{ user }}@leet'
     check_alive_start: "[[ `ps -ef | grep -v 'grep' | grep -v '/bin/sh -c' | grep -v $$ | grep -c '"
     check_alive_end: "'` == '0' ]] &&"
     combined_log_file: "{{ user_mfn.home }}/log.txt"
 
 - name: Miner | Facts | System | Global 2
-  set_fact:
+  ansible.builtin.set_fact:
     use_combined_log_file: ">> {{ combined_log_file }} 2>&1"
 
 
 ## Config File ##
 
 - name: Miner | Facts | System | My Config File
-  set_fact:
+  ansible.builtin.set_fact:
     config_file_remote: "InstallFiles/Miners/miner.ini"
     config_file_local: "{{ user_mfn.home }}/miner.ini"
     config_section_wallet: wallet
@@ -31,20 +31,20 @@
 ## Nanominer ##
 
 - name: Miner | Facts | System | nanominer 1
-  set_fact:
+  ansible.builtin.set_fact:
     nanominer_home: "{{ user_mfn.home }}/nanominer"
     nanominer_version: "3.4.3" # Download link: https://github.com/nanopool/nanominer/releases
     nanominer_script: "{{ user_mfn.home }}/nanominer.sh"
 
 - name: Miner | Facts | System | nanominer 2
-  set_fact:
+  ansible.builtin.set_fact:
     nanominer_bin: "{{ nanominer_home }}/nanominer-linux-{{ nanominer_version }}"
     nanominer_tar_remote: "InstallFiles/Miners/nanominer/*{{ nanominer_version }}*.tar.gz"
     nanominer_config: "{{ nanominer_home }}/config.ini"
     nanominer_logs: "{{ nanominer_home}}/logs"
 
 - name: Miner | Facts | System | nanominer 3
-  set_fact:
+  ansible.builtin.set_fact:
     nanominer_tar_local: "{{ nanominer_bin }}.tar.gz"
     nanominer_exec: "{{ nanominer_bin }}/nanominer"
 
@@ -52,7 +52,7 @@
 ## Miner Array ##
 
 - name: Miner | Facts | System | Miner Array
-  set_fact:
+  ansible.builtin.set_fact:
     miners:
     - { "name": "xmr_stak_cpu", "enabled": '{{ (xmr_stak_cpu != false) }}', "command": "{{ user_mfn.home }}/xmr_stak_cpu.sh {{ use_combined_log_file }}" }
     - { "name": "ethminer",     "enabled": '{{ (ethminer != false) }}',     "command": "{{ user_mfn.home }}/ethminer.sh {{ use_combined_log_file }}" }

facts/server/system.yml

@@ -2,6 +2,6 @@
 # System related variables.
 
 - name: Facts | Server | System | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     ansible_python_interpreter: "/usr/local/bin/python3.8"
   when: ansible_system == "FreeBSD"

facts/workstation/package.yml

@@ -3,14 +3,14 @@
 # This is only for Workstation devices with UIs.
 
 - name: Workstation | Facts | Packages | Parrot OS Fixes
-  set_fact:
+  ansible.builtin.set_fact:
     ansible_pkg_mgr: "apt"
     ansible_python_interpreter: "/usr/bin/python3"
   when: ansible_distribution == "Parrot OS"
 
 
 - name: Workstation | Facts | Package | Consistent
-  set_fact:
+  ansible.builtin.set_fact:
     firefox: firefox
     firefox_esr: firefox-esr
     thunderbird: thunderbird
@@ -26,55 +26,120 @@
     dmenu: dmenu
     sassc: sassc
     ffmpeg: ffmpeg
+    wireless_tools: wireless-tools
+    macbook_wifi_driver: broadcom-sta-dkms
+    xz: xz
+    mesa: mesa
+    mesa_utils: mesa-utils
+    ninja: ninja
+    notify_send: libnotify
+    fyi: fyi
+    gtk3: gtk3
+    xz_libs: xz
+    cpp: libstdc++
+    c_libs: glibc
+    cpp_libs: libstdc++
+    z_libs: zlib
+    bzip: bzip2
+    dunst: dunst
+    android_jdk: openjdk
+    ncurses: ncurses
+    android_fastboot: fastboot
+    android_adb: adb
+    android_sdkmanager: sdkmanager
+    android_udev: android-udev
+    gnome_boxes: gnome-boxes
+    rhythmbox: rhythmbox
+    vlc: vlc
+    vlc_plugins: vlc-plugins-all
+    blueman: blueman
+    mpv: mpv
+    transmission_gtk: transmission-gtk
+    transmission_qt: transmission-qt
+    libreoffice: libreoffice
+    strawberry: strawberry
 
 
+- name: Workstation | Facts | Package | apt (All Distros)
+  ansible.builtin.set_fact:
+    xz: xz-utils
+    mesa: libglu1-mesa
+    mesa_utils: libglu1-mesa
+    ninja: ninja-build
+    notify_send: libnotify-bin
+    gtk3: libgtk-3-dev
+    xz_libs: liblzma-dev
+    cpp: libstdc++-12-dev
+    c_libs: libc6:amd64
+    cpp_libs: libstdc++6
+    z_libs: lib32z1
+    bzip: libbz2-1.0
+    android_jdk: default-jdk
+    ncurses: libncurses-dev
+    android_udev: android-udev-rules
+    vlc_plugins: libavcodec-extra
+  when: ansible_pkg_mgr == "apt"
+
 - name: Workstation | Facts | Package | Pop_OS!
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
     firefox_esr: firefox
   when: ansible_distribution == "Pop!_OS"
 
-
 - name: Workstation | Facts | Package | Ubuntu
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
     firefox_esr: firefox
     dmenu: suckless-tools
   when: ansible_distribution == "Ubuntu"
 
-
-- name: Workstation | Facts | Package | Debian
-  set_fact:
+- name: Workstation | Facts | Package | Debian & Devuan
+  ansible.builtin.set_fact:
     flatpak_distro: true
     dmenu: suckless-tools
-  when: ansible_distribution == "Debian"
-
+    firefox: firefox-esr
+  when: ansible_distribution in ("Debian", "Devuan")
 
 - name: Workstation | Facts | Package | Mint
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
     firefox_esr: firefox
   when: ansible_distribution == "Linux Mint"
 
-
 - name: Workstation | Facts | Package | Parrot OS
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
-    firefox_esr: firefox-esr
   when: ansible_distribution == "Parrot OS"
 
+- name: Workstation | Facts | Package | Apt w/o LibVirt
+  ansible.builtin.set_fact:
+    gnome_boxes: htop
+  when: ansible_pkg_mgr == "apt"
+    and ansible_service_mgr not in ("systemd", "sysvinit")
 
-- name: Workstation | Facts | Package | Arch + Manjaro
-  set_fact:
+
+- name: Workstation | Facts | Package | pacman (All Distros)
+  ansible.builtin.set_fact:
+    macbook_wifi_driver: broadcom-wl-dkms
+    android_jdk: jdk-openjdk
+    android_fastboot: android-tools
+    android_adb: android-tools
+    libreoffice: libreoffice-still
+  when: ansible_pkg_mgr == "pacman"
+
+- name: Workstation | Facts | Package | Arch / Manjaro / Artix
+  ansible.builtin.set_fact:
     flatpak_distro: true
-    firefox_esr: firefox
     psutil: python-psutil
-    appimagelauncher: appimagelauncher
-  when: ansible_distribution == "Archlinux"
+    #appimagelauncher: appimagelauncher # No longer in the repos, AUR.
+    font_awesome: ttf-font-awesome
+    wireless_tools: wireless_tools
+    nfs: nfs-utils
+  when: ansible_pkg_mgr == "pacman"
 
 
 - name: Workstation | Facts | Package | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: false
     psutil: py38-psutil
     ansible_python_interpreter: "/usr/local/bin/python3.8"
@@ -84,7 +149,7 @@
 
 
 - name: Workstation | Facts | Package | Fedora
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
     firefox_esr: firefox
     font_awesome: python3-XStatic-Font-Awesome
@@ -94,7 +159,7 @@
 
 
 - name: Workstation | Facts | Package | openSUSE
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: true
     firefox_esr: firefox-esr-branding-openSUSE
     font_awesome: fontawesome-fonts
@@ -103,6 +168,6 @@
 
 
 - name: Workstation | Facts | Package | NixOS
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_distro: false
   when: ansible_distribution == "NixOS"

files/dwm/config.h

@@ -20,7 +20,7 @@ static const char *colors[][3]      = {
 };
 
 /* tagging */
-static const char *tags[] = { "1:", "2:", "3:", "4:", "5:", "6:", "7:", "8:", "9:" };
+static const char *tags[] = { "1 : ", "2 : ", "3 : ", "4 : ", "5 : ", "6 : ", "7 : ", "8 : ", "9 : " };
 
 static const Rule rules[] = {
 	/* xprop(1):
@@ -46,7 +46,7 @@ static const Layout layouts[] = {
 };
 
 /* key definitions */
-#define MODKEY Mod1Mask
+#define MODKEY Mod4Mask
 #define TAGKEYS(KEY,TAG) \
 	{ MODKEY,                       KEY,      view,           {.ui = 1 << TAG} }, \
 	{ MODKEY|ControlMask,           KEY,      toggleview,     {.ui = 1 << TAG} }, \
@@ -69,13 +69,16 @@ static const char *raisevolcmd[] = {"amixer","-q","sset","Master","1%+",NULL};
 static Key keys[] = {
 	/* modifier                     key        function        argument */
 	{ MODKEY,                       XK_p,      spawn,          {.v = dmenucmd } },
+	{ MODKEY,                       XK_d,      spawn,          {.v = dmenucmd } },
+	{ MODKEY,                       XK_b,      spawn,          {.v = dmenucmd } },
+	{ MODKEY,                       XK_space,      spawn,          {.v = dmenucmd } },
 	{ MODKEY|ShiftMask,             XK_Return, spawn,          {.v = termcmd } },
 	{ MODKEY,                       XK_Return, spawn,          {.v = termcmd } },
-	{ MODKEY,                       XK_b,      togglebar,      {0} },
+	//{ MODKEY,                       XK_b,      togglebar,      {0} },
 	{ MODKEY,                       XK_j,      focusstack,     {.i = +1 } },
 	{ MODKEY,                       XK_k,      focusstack,     {.i = -1 } },
 	{ MODKEY,                       XK_i,      incnmaster,     {.i = +1 } },
-	{ MODKEY,                       XK_d,      incnmaster,     {.i = -1 } },
+	//{ MODKEY,                       XK_d,      incnmaster,     {.i = -1 } },
 	{ MODKEY,                       XK_h,      setmfact,       {.f = -0.05} },
 	{ MODKEY,                       XK_l,      setmfact,       {.f = +0.05} },
 	{ MODKEY,                       XK_Return, zoom,           {0} },
@@ -84,8 +87,8 @@ static Key keys[] = {
 	{ MODKEY,                       XK_t,      setlayout,      {.v = &layouts[0]} },
 	{ MODKEY,                       XK_f,      setlayout,      {.v = &layouts[1]} },
 	{ MODKEY,                       XK_m,      setlayout,      {.v = &layouts[2]} },
-	{ MODKEY,                       XK_space,  setlayout,      {0} },
-	{ MODKEY|ShiftMask,             XK_space,  togglefloating, {0} },
+	//{ MODKEY,                       XK_space,  setlayout,      {0} },
+	//{ MODKEY|ShiftMask,             XK_space,  togglefloating, {0} },
 	{ MODKEY,                       XK_0,      view,           {.ui = ~0 } },
 	{ MODKEY|ShiftMask,             XK_0,      tag,            {.ui = ~0 } },
 	{ MODKEY,                       XK_comma,  focusmon,       {.i = -1 } },

files/functions/volume.function

@@ -31,8 +31,8 @@ function volume-usage {
 	EOF
 	return $1
 }
-alias volume-help="volume-usage"
-alias vol-h="volume-help"
+#alias volume-help="volume-usage"
+#alias vol-h="volume-help"
 
 function volume {
 
@@ -135,9 +135,9 @@ function volume {
 	echo "$0 $1 $2"
 	return 7
 }
-alias vol="volume "
-alias vol-="volume - "
-alias vol+="volume + "
+#alias vol="volume "
+#alias vol-="volume - "
+#alias vol+="volume + "
 
 function volume-display {
 	if [[ "$1" == "-v" || "$1" == "--verbose" || "$1" == "verbose" ]]; then
@@ -146,7 +146,7 @@ function volume-display {
 		amixer sget Master | egrep -o '[0-9]{1,3}%' | head -n 1
 	fi
 }
-alias "vol-d"="volume-display"
+#alias "vol-d"="volume-display"
 
 ## TBD/TODO ##
 

files/scripts/backup_system.sh

@@ -12,12 +12,16 @@ if [[ -z "$HOSTNAME" ]]; then
 fi
 
 EXTRA="$1"
-TAG="System"
 DATE="`date "+%Y%m%d-%H%M%S"`"
 BACKUP_DIR="/srv/backup"
 BASENAME="Backup"
+
+TAG="System"
 BACKUP="$BACKUP_DIR/$BASENAME.$DATE.$HOSTNAME.$TAG.zip"
 
+TAG2="Data"
+BACKUP2="${BACKUP//$TAG/$TAG2}"
+
 ## Initialization ##
 
 echo "*** Creating Backup Directory ***"
@@ -31,15 +35,19 @@ sudo chown -Rv root:root "$BACKUP_DIR"
 echo "*** Removing Old Backups ***"
 cd "$BACKUP_DIR"
 sudo mv -v "$BASENAME"*"$TAG"* TRASH/
+sudo mv -v "$BASENAME"*"$TAG2"* TRASH/
 sudo rm -v TRASH/*
 
 ## Main
 
+# System Backup
+
 echo "*** Creating backup at '$BACKUP' ***"
 sudo zip -rv "$BACKUP" \
 	/etc /var/{log,mail,spool} /srv /boot \
 	/usr/local/etc $EXTRA \
-	-x "/srv/backup/*" -x "/srv/sftp/*"
+	-x "/srv/backup/*" -x "/srv/sftp/*" \
+	-x "*/.gradle/" -x "*/app/build/*"
 status="$?"
 
 if [[ "$status" != 0 ]]; then
@@ -54,4 +62,27 @@ else
 	exit 1
 fi
 
+echo -e "\n\n"
+sleep 5
+
+# Data Backup
+
+echo "*** Creating backup at '$BACKUP2' ***"
+sudo zip -rv "$BACKUP2" \
+	/root /home /srv/sftp \
+	-x "*/.gradle/" -x "*/app/build/*"
+status="$?"
+
+if [[ "$status" != 0 ]]; then
+	echo "*** ERROR: Failed to create '$BACKUP2', file may be incorrect. ***"
+fi
+
+if [[ -e "$BACKUP2" ]]; then
+	ls -alh "$BACKUP2"
+	echo "*** '$BACKUP2' created successfully! ***"
+else
+	echo "*** '$BACKUP2' not found! ***"
+	exit 1
+fi
+
 exit 0

files/scripts/battery_nag.sh

@@ -0,0 +1,115 @@
+#!/usr/bin/env bash
+# 20260819 - Hyperling
+# Alert the user every so often once the battery is low.
+
+## Setup ##
+
+echo "`date` - Checking Active Programs"
+
+ps -ef | grep battery_nag.sh | grep -v grep | grep -v "sh -c" | grep -v kill | grep -v $$
+
+active=`ps -ef | grep battery_nag.sh | grep -v grep | grep -v "sh -c" | grep -v kill | grep -vc $$`
+if (( "$active" >= 1 )); then
+	echo "Program already running, exiting. Number of processes: $active"
+	exit 1
+fi
+
+echo "`date` - Loading Functions"
+
+which battery.function || {
+	echo "ERROR: Battery function not found, exiting."
+	exit 2
+}
+source battery.function
+
+## Params ##
+
+echo "`date` - Parsing Parameters"
+
+typeset -i alert sleep
+
+# Default to 20%.
+alert=20
+if [[ -n "$1" ]]; then
+	echo -n "alert changed from '$alert' "
+	alert="$1"
+	echo "to '$alert'"
+fi
+
+# Default to 5 minutes.
+sleep=300
+if [[ -n "$2" ]]; then
+	echo -n "sleep changed from '$sleep' "
+	sleep="$2"
+	echo "to '$sleep'"
+fi
+
+# Default to true.
+accelerate="Y"
+if [[ -n "$3" ]]; then
+	echo -n "accelerate changed from '$accelerate' "
+	accelerate="$3"
+	echo "to '$accelerate'"
+fi
+
+echo "Alerting when under ${alert}%."
+echo "Notifying every ${sleep} seconds."
+if [[ "$accelerate" == "Y" ]]; then
+	echo -n "Speeding up notifications as % gets lower."
+else
+	echo -n "Notifcations staying persistent."
+fi
+echo " (accelerate == $accelerate)"
+
+## Main ##
+
+echo "`date` - Starting Loop"
+
+while true; do
+
+	batt=`battery-display`
+	batt=${batt//%/}
+
+	if (( batt <= alert )); then
+		title="Battery is below ${alert}%"
+		message="Currently at ${batt}%"
+		cmd="`which fyi 2>/dev/null || which notify-send 2>/dev/null`"
+		if [[ -z "$cmd" ]]; then
+			echo "ERROR: No command found to send notification, exiting."
+			echo "Please install 'fyi' or 'notify-send' to use this script."
+			echo "If not using a DE, also ensure 'dunst' or similar is running."
+			exit 3
+		fi
+		echo "`date` - Attempting to report battery level at ${batt}."
+
+		$cmd "$title" "$message"
+		status="$?"
+
+		if [[ "$status" == 0 ]]; then
+			echo -n "`date` - Success! "
+		else
+			echo -n "`date` - ERROR: "
+		fi
+		echo "Nag returned status ${status}."
+	else
+		echo "`date` - Battery at ${batt}%, did not nag."
+	fi
+
+	time=$sleep
+	if [[ "$accelerate" == "Y" && $batt -lt $alert ]]; then
+		# Bash only returns whole numbers, so things like 20/11 only provide 1.
+		# Likewise, if the battery is full, 20/100 returns 0, which is bad. :)
+		if (( batt > 0 )); then
+			time=$(( time / (alert / batt) ))
+		else
+			time=10
+		fi
+	fi
+	# Showing a notification every 10 seconds makes it persistent.
+	# Any more than that casues multiple to stack which is unnecessary.
+	if (( time < 10 )); then
+		time=10
+	fi
+	echo "`date` - Sleeping for ${time}."
+	sleep $time
+done

files/scripts/compress_audio.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # 2023-12-04 Hyperling
-# Lower resolution of audio and convert to mp3. Also
+# Lower the resolution of audio and convert to mp3.
 # Also see: compress-video.sh
 
 ## Setup ##
@@ -36,7 +36,8 @@ function usage() {
 		  Compress audio to mp3. Can handle folders and work recursively.
 
 		Parameters:
-		  -q QUALITY : Integer for the maximum length of either media dimension.
+		  -q QUALITY : Integer for audio bitrate to transcode to.
+		               Defaults to 256k. No lower than 192k suggested.
 		  -l LOCATION : The specific media or folder which needs compressed.
 		  -r : Recursively shrink media based on the location passed.
 		  -f : Force the media to be shrunk even if a file already exists for it.
@@ -181,8 +182,8 @@ $search "$location" | sort | while read media; do
 
 	if [[ -n "$delete" ]]; then
 		echo -n "  DELETE: "
-		if [[ -d ~/TRASH ]]; then
-			mv -v "$media" ~/TRASH/
+		if [[ -d $HOME/TRASH ]]; then
+			mv -v "$media" $HOME/TRASH/
 		else
 			rm -v "$media"
 		fi

files/scripts/compress_image.sh

@@ -15,6 +15,7 @@ size=2000
 
 # Strings
 tag="shrunk"
+use_tag="Y"
 date_YYYYMMDD="`date "+%Y%m%d"`"
 location="."
 search="ls"
@@ -28,7 +29,7 @@ function usage() {
 	# Parameters:
 	#   1) The exit status to use.
 	status=$1
-	echo "Usage: $PROG [-s SIZE] [-l LOCATION] [-A | [-r] [-f] [-d] [-c]] [-h] [-x] [-t]" >&2
+	echo "Usage: $PROG [-s SIZE] [-l LOCATION] [-A | [-r] [-f] [-d] [-c] [-e | -t] [-h] [-x] [-n]" >&2
 	cat <<- EOF
 		  Compress JPG or PNG image(s). Can handle folders and work recursively.
 
@@ -42,17 +43,18 @@ function usage() {
 		  -F : FORCE the image to be shrunk even if the file is already shrunk.
 		  -d : Delete the original image if the compressed image is smaller.
 		  -c : Clean the filename of underscores, dashes, 'IMG', etc.
+		  -e | -t : Format timestamp to the expanded model.
 		  -A : Resursively Force, Delete, and Clean.
 		  -h : Display this usage text.
 		  -x : Enable BASH debugging.
-		  -t : Format timestamp.
+		  -n : No file extension.
 	EOF
 	exit $status
 }
 
 ## Parameters ##
 
-while getopts ":s:l:rfFdcAhxt" opt; do
+while getopts ":s:l:rfFdcetAhxn" opt; do
 	case $opt in
 		s) in_size="$OPTARG" && size="$in_size" ;;
 		l) location="$OPTARG" ;;
@@ -62,10 +64,11 @@ while getopts ":s:l:rfFdcAhxt" opt; do
 		d) delete="Y" ;;
 		c) clean="Y" ;;
 		e) expand="Y" ;;
-		A) recurse="Y" && search="find" && force="Y" && delete="Y" && expand="Y" ;;
+		t) expand="Y" ;;
+		A) recurse="Y" && search="find" && force="Y" && delete="Y" ;;
 		h) usage 0 ;;
 		x) set -x ;;
-		t) format_time="Y" ;;
+		n) use_tag="N" ;;
 		*) echo "ERROR: Option $OPTARG not recognized." >&2 && usage 1 ;;
 	esac
 done
@@ -114,6 +117,12 @@ $search "$location" | sort | while read image; do
 	fi
 
 	new_image="${image//.$extension/}.$tag-$date_YYYYMMDD.$size.$extension"
+	if [[ "$use_tag" == "N" ]]; then
+		new_image="$image"
+		new_image="${new_image//.$extension/}"
+		new_image="${new_image//.$tag/}"
+		new_image="$new_image.$tag.$extension"
+	fi
 
 	## Clean Filename ##
 	# Prevent directory from having its name cleaned too.
@@ -132,9 +141,7 @@ $search "$location" | sort | while read image; do
 	# Date Data
 	new_image_exp="${TEMP:0:4}-${TEMP:4:2}-${TEMP:6:2}"
 	# Time Data
-	if [[ "$format_time" == "Y" ]]; then
-		new_image_exp="${new_image_exp}_${TEMP:8:2}-${TEMP:10:2}-${TEMP:12:2}"
-	fi
+	new_image_exp="${new_image_exp}_${TEMP:8:2}-${TEMP:10:2}-${TEMP:12:2}"
 	# Remainder Data
 	if [[ "${TEMP:14:1}" == "." ]]; then
 		SEP=""
@@ -156,7 +163,7 @@ $search "$location" | sort | while read image; do
 	fi
 
 	# Skip if a compressed image was already created today.
-	if [[ -e "$new_image" || -e $new_image_clean ]]; then
+	if [[ (-e "$new_image" || -e $new_image_clean) && $use_tag == "Y" ]]; then
 		echo "  SKIP: Image has already been shrunk previously, moving on."
 		continue
 	fi
@@ -208,8 +215,8 @@ $search "$location" | sort | while read image; do
 
 	if [[ -n "$delete" ]]; then
 		echo -n "  DELETE: "
-		if [[ -d ~/TRASH ]]; then
-			mv -v "$image" ~/TRASH/
+		if [[ -d $HOME/TRASH ]]; then
+			mv -v "$image" $HOME/TRASH/
 		else
 			rm -v "$image"
 		fi

files/scripts/compress_video.sh

@@ -225,8 +225,8 @@ $search_command "$input" | sort | while read file; do
 	if [[ -e "$newfile" || -e "$new_video_clean" ]]; then
 		if [[ "$force" == "Y" ]]; then
 			echo "FORCE: Removing '$newfile'."
-			if [[ -d ~/TRASH ]]; then
-				mv -v "$newfile" "$new_video_clean" ~/TRASH/ 2>/dev/null
+			if [[ -d $HOME/TRASH ]]; then
+				mv -v "$newfile" "$new_video_clean" $HOME/TRASH/ 2>/dev/null
 			else
 				rm -v "$newfile" "$new_video_clean" 2>/dev/null
 			fi
@@ -279,8 +279,8 @@ $search_command "$input" | sort | while read file; do
 
 	if [[ -n "$delete" ]]; then
 		echo -n "Original has been deleted: "
-		if [[ -d ~/TRASH ]]; then
-			mv -v "$file" ~/TRASH/
+		if [[ -d $HOME/TRASH ]]; then
+			mv -v "$file" $HOME/TRASH/
 		else
 			rm -v "$file"
 		fi

files/scripts/nixos.sh

@@ -7,7 +7,7 @@
 DIR="$(dirname -- "${BASH_SOURCE[0]}")"
 PROG="$(basename -- "${BASH_SOURCE[0]}")"
 
-nixos_working_dir=~/nixos-config-deleteme
+nixos_working_dir=$HOME/nixos-config-deleteme
 nixos_working_exe=activate.sh
 
 ## Functions ##

files/scripts/volume

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+source /usr/local/bin/volume.function
+
+volume $@

files/settings/i3.config

@@ -0,0 +1,407 @@
+# This file has been auto-generated by i3-config-wizard(1).
+# It will not be overwritten, so edit it as you like.
+#
+# Should you change your keyboard layout some time, delete
+# this file and re-run i3-config-wizard(1).
+#
+
+# i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+
+set $FIREFOX "sh -c '(firefox || firefox-esr || firefox-flatpak)'"
+set $TRANSMISSION "sh -c '(transmission || transmission-qt || transmission-gtk || transmission-flatpak)'"
+
+# Use the `xev` command to see the name and code of a keyboard key.
+
+set $mod Mod4
+set $alt Mod1
+set $ctrl Control
+set $shift Shift
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Start XDG autostart .desktop files using dex. See also
+# https://wiki.archlinux.org/index.php/XDG_Autostart
+exec --no-startup-id dex --autostart --environment i3
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+#bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status
+#bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status
+#bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status
+#bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3status
+
+# Use Mouse+$mod to drag floating windows to their wanted position
+floating_modifier $mod
+
+# move tiling windows via drag & drop by left-clicking into the title bar,
+# or left-clicking anywhere into the window while holding the floating modifier.
+tiling_drag modifier titlebar
+
+# start a terminal
+bindsym $mod+Return exec i3-sensible-terminal
+#bindsym $mod+Return exec st
+
+# kill focused window
+#bindsym $mod+Shift+q kill
+bindsym $mod+q kill
+
+# start dmenu (a program launcher)
+bindsym $mod+d exec --no-startup-id dmenu_run
+bindsym $mod+b exec --no-startup-id dmenu_run
+bindsym $mod+space exec --no-startup-id dmenu_run
+# A more modern dmenu replacement is rofi:
+# bindcode $mod+40 exec "rofi -modi drun,run -show drun"
+# There also is i3-dmenu-desktop which only displays applications shipping a
+# .desktop file. It is a wrapper around dmenu, so you need that installed.
+# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+#bindsym $mod+j focus left
+#bindsym $mod+k focus down
+#bindsym $mod+l focus up
+#bindsym $mod+semicolon focus right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Left focus left
+bindsym $mod+Down focus down
+bindsym $mod+Up focus up
+bindsym $mod+Right focus right
+
+# move focused window
+#bindsym $mod+Shift+j move left
+#bindsym $mod+Shift+k move down
+#bindsym $mod+Shift+l move up
+#bindsym $mod+Shift+semicolon move right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Shift+Left move left
+bindsym $mod+Shift+Down move down
+bindsym $mod+Shift+Up move up
+bindsym $mod+Shift+Right move right
+
+# split in horizontal orientation
+bindsym $mod+h split h
+
+# split in vertical orientation
+bindsym $mod+v split v
+
+# enter fullscreen mode for the focused container
+bindsym $mod+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym $mod+s layout stacking
+bindsym $mod+w layout tabbed
+bindsym $mod+e layout toggle split
+
+# toggle tiling / floating
+bindsym $mod+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+#bindsym $mod+space focus mode_toggle
+
+# focus the parent container
+bindsym $mod+a focus parent
+
+# focus the child container
+#bindsym $mod+d focus child
+
+
+## Extra Program Shortcuts ##
+
+# Theming.
+bindsym $mod+t exec lxappearance
+
+# Manage files.
+bindsym $mod+m exec thunar
+
+# Internet.
+bindsym $mod+i exec $FIREFOX
+
+# Code.
+bindsym $mod+c exec codium-flatpak
+
+
+## Brightness ##
+# light requires sudo privileges unless video group and udev are configured.
+
+set $b_time 3000
+set $b_small 10
+set $b_large 20
+
+# Use the bracket keys to change the brightness.
+bindsym $mod+bracketleft         exec --no-startup-id "light -U $b_small && notify-send -t $b_time 'Brightness -  ' $(light -G)"
+bindsym $mod+bracketright        exec --no-startup-id "light -A $b_small && notify-send -t $b_time 'Brightness +  ' $(light -G)"
+bindsym $shift+$mod+bracketleft  exec --no-startup-id "light -U $b_large && notify-send -t $b_time 'Brightness ---' $(light -G)"
+bindsym $shift+$mod+bracketright exec --no-startup-id "light -A $b_large && notify-send -t $b_time 'Brightness +++' $(light -G)"
+
+# Also get the actual brightness keys to work!!
+bindsym XF86MonBrightnessUp          exec --no-startup-id "light -A $b_small && notify-send -t $b_time 'Brightness +  ' $(light -G)"
+bindsym XF86MonBrightnessDown        exec --no-startup-id "light -U $b_small && notify-send -t $b_time 'Brightness -  ' $(light -G)"
+bindsym $shift+XF86MonBrightnessUp   exec --no-startup-id "light -A $b_large && notify-send -t $b_time 'Brightness +++' $(light -G)"
+bindsym $shift+XF86MonBrightnessDown exec --no-startup-id "light -U $b_large && notify-send -t $b_time 'Brightness ---' $(light -G)"
+
+
+## Keyboard Brightness ##
+
+# Use same timing and step size settings as above.
+
+# Macbooks tend to use 'sysfs/leds/smc::kbd_backlight'
+# NovaCustom laptop is 'sysfs/leds/system76_acpi::kbd_backlight'
+# Some other laptops may be 'sysfs/class/leds/...', use ìght -L`to find out.
+bindsym XF86KbdBrightnessUp          exec "light -s sysfs/leds/smc::kbd_backlight -A $b_small && notify-send -t $b_time 'Keyboard Brightness +  ' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym XF86KbdBrightnessDown        exec "light -s sysfs/leds/smc::kbd_backlight -U $b_small && notify-send -t $b_time 'Keyboard Brightness -  ' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym $shift+XF86KbdBrightnessUp   exec "light -s sysfs/leds/smc::kbd_backlight -A $b_large && notify-send -t $b_time 'Keyboard Brightness +++' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym $shift+XF86KbdBrightnessDown exec "light -s sysfs/leds/smc::kbd_backlight -U $b_large && notify-send -t $b_time 'Keyboard Brightness ---' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+
+bindsym $mod+apostrophe        exec "light -s sysfs/leds/smc::kbd_backlight -A $b_small && notify-send -t $b_time 'Keyboard Brightness +  ' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym $mod+semicolon         exec "light -s sysfs/leds/smc::kbd_backlight -U $b_small && notify-send -t $b_time 'Keyboard Brightness -  ' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym $shift+$mod+apostrophe exec "light -s sysfs/leds/smc::kbd_backlight -A $b_large && notify-send -t $b_time 'Keyboard Brightness +++' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+bindsym $shift+$mod+semicolon  exec "light -s sysfs/leds/smc::kbd_backlight -U $b_large && notify-send -t $b_time 'Keyboard Brightness ---' $(light -s sysfs/leds/smc::kbd_backlight -G)"
+
+
+## Volume ##
+# The volume function is from https://git.hyperling.com/me/env-ansible
+
+set $v_time 1500
+set $v_small 5
+set $v_large 25
+
+# Use the comma and period keys to change volume.
+bindsym $mod+comma         exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume -$v_small && notify-send -t $v_time "Volume -  " $(volume)'
+bindsym $mod+period        exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume +$v_small && notify-send -t $v_time "Volume +  " $(volume)'
+bindsym $shift+$mod+comma  exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume -$v_large && notify-send -t $v_time "Volume ---" $(volume)'
+bindsym $shift+$mod+period exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume +$v_large && notify-send -t $v_time "Volume +++" $(volume)'
+
+# Actual volume keys.
+bindsym XF86AudioMute               exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume mute       && notify-send -t $v_time "Volume Muted" $(volume)'
+bindsym XF86AudioRaiseVolume        exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume +$v_small  && notify-send -t $v_time "Volume +    " $(volume)'
+bindsym XF86AudioLowerVolume        exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume -$v_small  && notify-send -t $v_time "Volume -    " $(volume)'
+bindsym $shift+XF86AudioRaiseVolume exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume +$v_large  && notify-send -t $v_time "Volume +++  " $(volume)'
+bindsym $shift+XF86AudioLowerVolume exec --no-startup-id bash -c 'source /usr/local/bin/volume.function && volume -$v_large  && notify-send -t $v_time "Volume ---  " $(volume)'
+
+bindsym $mod+slash exec pavucontrol
+
+
+
+## Workspaces ##
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+# Command Line
+set $ws1 "1 - CMD"
+# Web Surfing
+set $ws2 "2 - WEB"
+# Programming
+set $ws3 "3 - PRG"
+# Android (Flutter, Qt, Kivy, etc)
+set $ws4 "4 - AND"
+# Chats
+set $ws5 "5 - CHT"
+# Other
+set $ws6 "6 - OTH"
+# Torrents
+set $ws7 "7 - TOR"
+# Music
+set $ws8 "8 - MUS"
+# Videos
+set $ws9 "9 - VID"
+# VPNs
+set $ws0 "10 - VPN"
+
+# switch to workspace
+bindsym $mod+1 workspace number $ws1
+bindsym $mod+2 workspace number $ws2
+bindsym $mod+3 workspace number $ws3
+bindsym $mod+4 workspace number $ws4
+bindsym $mod+5 workspace number $ws5
+bindsym $mod+6 workspace number $ws6
+bindsym $mod+7 workspace number $ws7
+bindsym $mod+8 workspace number $ws8
+bindsym $mod+9 workspace number $ws9
+bindsym $mod+0 workspace number $ws0
+
+# move focused container to workspace
+bindsym $mod+Shift+1 move container to workspace number $ws1
+bindsym $mod+Shift+2 move container to workspace number $ws2
+bindsym $mod+Shift+3 move container to workspace number $ws3
+bindsym $mod+Shift+4 move container to workspace number $ws4
+bindsym $mod+Shift+5 move container to workspace number $ws5
+bindsym $mod+Shift+6 move container to workspace number $ws6
+bindsym $mod+Shift+7 move container to workspace number $ws7
+bindsym $mod+Shift+8 move container to workspace number $ws8
+bindsym $mod+Shift+9 move container to workspace number $ws9
+bindsym $mod+Shift+0 move container to workspace number $ws0
+
+## Keep certain programs in certain tabs. ##
+# Use the `xprop` command to find the class of a program.
+# (?i) makes the regex case insensitive.
+
+assign [class="Navigator"] $ws2
+assign [class="(?i).*navigator.*"] $ws2
+assign [class="(?i).*firefox.*"] $ws2
+assign [class="(?i).*librewolf.*"] $ws2
+assign [class="(?i).*brave.*"] $ws2
+
+assign [class="(?i).*codium.*"] $ws3
+assign [class="(?i).*code.*"] $ws3
+
+assign [class="(?i).*flutter.*"] $ws4
+assign [class="(?i).*jetbrains.*"] $ws4
+
+assign [class="(?i).*signal.*"] $ws5
+assign [class="(?i).*telegram.*"] $ws5
+assign [class="(?i).*session.*"] $ws5
+assign [class="(?i).*dino.*"] $ws5
+
+assign [class="(?i).*pavucontrol.*"] $ws6
+assign [class="(?i).*blueman.*"] $ws6
+assign [class="(?i).*boxes.*"] $ws6
+assign [class="(?i).*waydroid.*"] $ws6
+
+assign [class="(?i).*transmission.*"] $ws7
+
+assign [class="(?i).*rhythmbox.*"] $ws8
+assign [class="(?i).*strawberry.*"] $ws8
+
+assign [class="(?i).*vlc.*"] $ws9
+assign [class="(?i).*mpv.*"] $ws9
+
+assign [class="(?i).*vpn.*"] $ws0
+assign [class="(?i).*mullvad.*"] $ws0
+
+
+## Workspace Specific Workflows ##
+bindsym $ctrl+$shift+1 workspace $ws1; exec "i3-sensible-terminal & gnome-system-monitor"
+bindsym $ctrl+$shift+2 workspace $ws2; exec $FIREFOX
+bindsym $ctrl+$shift+3 workspace $ws3; exec "(codium || vscodium || codium-flatpak || vscodium-flatpak)"
+bindsym $ctrl+$shift+4 workspace $ws4; exec "android-studio || android-studio-flatpak"
+bindsym $ctrl+$shift+5 workspace $ws5; exec "(signal || signal-flatpak) & (dino || dino-flatpak) & (forkgram || forkgram-flatpak || telegram || telegram-flatpak)"
+bindsym  $alt+$shift+5 workspace $ws5; exec "(forkgram || forkgram-flatpak || telegram || telegram-flatpak) & (session || session-flatpak)"
+bindsym $ctrl+$shift+6 workspace $ws6; exec "pavucontrol & blueman-manager"
+bindsym $ctrl+$shift+7 workspace $ws7; exec $TRANSMISSION
+bindsym $ctrl+$shift+8 workspace $ws8; exec strawberry
+bindsym $ctrl+$shift+9 workspace $ws9; exec thunar
+bindsym $ctrl+$shift+0 workspace $ws0; exec mullvad-vpn
+
+
+## Reloads, Restarts, Exit ##
+
+# reload the configuration file
+bindsym $mod+Shift+c reload
+
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym $mod+Shift+r restart
+
+# exit i3 (logs you out of your X session)
+bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"
+bindsym $mod+Shift+q exec "i3-msg exit"
+
+# lock
+bindsym $ctrl+$alt+l exec "i3lock -c 000000 -e -f && sleep 1 && xset dpms force off"
+bindsym $ctrl+$mod+l exec "i3lock -c 000000 -e -f && sleep 1 && xset dpms force off"
+bindsym $shift+$mod+l exec "i3lock -c 000000 -e -f && sleep 1 && xset dpms force off"
+
+# shutdown entire system.
+#bindsym $ctrl+$shift+q exec dbus-send --system --print-reply --dest="org.freedesktop.ConsoleKit" /org/freedesktop/ConsoleKit/Manager org.freedesktop.ConsoleKit.Manager.Stop
+bindsym $ctrl+$alt+q exec sudo shutdown -h now
+bindsym $shift+$alt+q exec sudo shutdown -h now
+bindsym $shift+$ctrl+q exec sudo shutdown -h now
+
+## Resizing (Disabled) ##
+
+# resize window (you can also use the mouse for that)
+#mode "resize" {
+#        # These bindings trigger as soon as you enter the resize mode
+#
+#        # Pressing left will shrink the window’s width.
+#        # Pressing right will grow the window’s width.
+#        # Pressing up will shrink the window’s height.
+#        # Pressing down will grow the window’s height.
+#        bindsym j resize shrink width 10 px or 10 ppt
+#        bindsym k resize grow height 10 px or 10 ppt
+#        bindsym l resize shrink height 10 px or 10 ppt
+#        bindsym semicolon resize grow width 10 px or 10 ppt
+#
+#        # same bindings, but for the arrow keys
+#        bindsym Left resize shrink width 10 px or 10 ppt
+#        bindsym Down resize grow height 10 px or 10 ppt
+#        bindsym Up resize shrink height 10 px or 10 ppt
+#        bindsym Right resize grow width 10 px or 10 ppt
+#
+#        # back to normal: Enter or Escape or $mod+r
+#        bindsym Return mode "default"
+#        bindsym Escape mode "default"
+#        bindsym $mod+r mode "default"
+#}
+#
+#bindsym $mod+r mode "resize"
+
+
+## Taskbar ##
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command i3status
+}
+
+
+## Startup Applications ##
+
+# Workspace 1
+exec --no-startup-id i3-sensible-terminal
+exec --no-startup-id gnome-system-monitor
+
+# Respective Workspaces
+exec --no-startup-id mullvad-vpn
+exec --no-startup-id $TRANSMISSION
+
+# Set defaults for laptop backlights.
+exec --no-startup-id "light -S 20; light -N 5; light -O"
+
+# Set the correct keymap.
+exec_always --no-startup-id setxkbmap -layout us -variant altgr-intl
+
+# Notifications (allows fyi and notify-send to work)
+exec_always --no-startup-id "killall dunst; dunst"
+
+# Audio
+exec        --no-startup-id "sleep 00; dbus-launch --exit-with-session i3"
+exec_always --no-startup-id "sleep 00; killall pipewire wireplumber pipewire-pulse"
+exec_always --no-startup-id "sleep 01; pipewire >~/Reports/pipewire.log 2>&1 &"
+exec_always --no-startup-id "sleep 02; wireplumber >~/Reports/wireplumber.log 2>&1 &"
+exec_always --no-startup-id "sleep 03; pipewire-pulse >~/Reports/pipewire-pulse.log 2>&1 &"
+exec        --no-startup-id "sleep 04; bash -c 'source /usr/local/bin/volume.function && volume 25'"
+
+# Wallpaper
+exec_always --no-startup-id feh --recursive --randomize --bg-fill ~/Pictures/Wallpapers
+
+# Compositor
+exec_always --no-startup-id "killall picom; picom -f --backend xrender"
+
+# Battery
+exec_always --no-startup-id bash -c 'pkill -ef "bash `which battery_nag.sh`" >~/Reports/battery_nag.log 2>&1; battery_nag.sh >>~/Reports/battery_nag.log 2>&1'
+
+# Redshift
+#exec_always --no-startup-id "killall redshift-gtk; redshift-gtk"
+#exec_always --no-startup-id "killall redshift;     redshift -l 35.19540:-111.65720 -t 6500K:1100K"
+exec_always --no-startup-id "killall redshift; killall redshift-gtk; sleep 1; redshift -x; redshift-gtk -l 35.19540:-111.65720 -t 6500K:1100K"

files/settings/vscode.json

@@ -4,25 +4,44 @@
 	"save_loc2": "~/.var/app/com.vscodium.codium/config/VSCodium/{{ user_desc }}/settings.json",
 	"END_COMMENTS": "",
 
+	"update.showReleaseNotes": false,
 	"workbench.startupEditor": "none",
-	"editor.rulers": [
-		 80, 120, 200
-	],
-	"files.trimTrailingWhitespace": true,
-	"editor.tabSize": 3,
-	"editor.insertSpaces": false,
-	"files.insertFinalNewline": true,
-	"[html]": {
-		"files.insertFinalNewline": false
-	},
-	"files.trimFinalNewlines": true,
 	"git.confirmSync": false,
 
-    "[dart]": {
-        "editor.formatOnSave": true,
-        "editor.formatOnType": true,
-        "editor.selectionHighlight": false,
-        "editor.tabCompletion": "onlySnippets",
-        "editor.wordBasedSuggestions": "off"
-    }
+	"editor.rulers": [
+		 80, 120, 200,
+	],
+
+	"files.trimFinalNewlines": true,
+	"files.trimTrailingWhitespace": true,
+
+	"editor.tabSize": 3,
+	"editor.insertSpaces": false,
+
+	"editor.autoClosingBrackets": "never",
+	"editor.autoClosingQuotes": "never",
+
+	"files.insertFinalNewline": true,
+	"[html]": {
+		"files.insertFinalNewline": false,
+	},
+
+	"[dart]": {
+		"editor.formatOnSave": true,
+		"editor.formatOnType": true,
+		"editor.selectionHighlight": false,
+		"editor.tabCompletion": "onlySnippets",
+		"editor.wordBasedSuggestions": "off",
+	},
+
+	"json.schemas": [
+		{
+			"fileMatch": ["*.json", "*.jsonc"],
+			"schema": {
+					"allowTrailingCommas": true,
+			}
+		}
+	],
+
+	"redhat.telemetry.enabled": false,
 }

files/sudo/sudoers_sudo

@@ -1,2 +1,5 @@
 
 %sudo ALL=(ALL) ALL
+
+# Allow anyone in the sudo group to shutdown or reboot without a password.
+%sudo ALL=(ALL) NOPASSWD: /sbin/shutdown, /usr/sbin/shutdown, /sbin/reboot, /usr/sbin/reboot

files/templates/video.md

@@ -0,0 +1,22 @@
+# title
+
+NAME
+
+# desc
+
+CONTENT
+
+---
+
+Recorded and edited YYYY-MM-DD.
+Recorded YYYY-MM-DD, edited YYYY-MM-DD.
+
+[blog.hyperling.com/TBD](https://blog.hyperling.com/TBD)
+
+# tags
+
+-
+,
+,
+,
+,

local.yml

@@ -9,166 +9,230 @@
 
   tasks:
 
+    ####### Lock #######
+    # Ensure a process is not already running.
+    - name: Main | Lock
+      block:
+
+        - ansible.builtin.include_tasks: tasks/general/tests/lock_check.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/lock_create.yml
+
+
     ####### Gather #######
     # Load facts for all systems.
+    - name: Main | Gather
+      block:
 
-    - include_tasks: facts/general/gather.yml
-    - include_tasks: tasks/general/acct_mgmt/provision_config.yml
+        - ansible.builtin.include_tasks: facts/general/gather.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/provision_config.yml
 
-    - include_tasks: facts/general/system.yml
-    - include_tasks: facts/general/package.yml
-    - include_tasks: facts/general/service.yml
-    - include_tasks: facts/general/user.yml
+        - ansible.builtin.include_tasks: facts/general/system.yml
+        - ansible.builtin.include_tasks: facts/general/package.yml
+        - ansible.builtin.include_tasks: facts/general/service.yml
+        - ansible.builtin.include_tasks: facts/general/user.yml
 
+        - ansible.builtin.include_tasks: tasks/general/tests/internet_check.yml
+
+
+    ####### Start #######
+    - name: Main | Start
+      block:
+
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/notify.yml
+          vars:
+            notify_message: "Provisioning Started"
+
+      when: workstation
 
     ####### NixOS #######
     # Install the .nix files and do a little data setup.
-
     - name: Main | NixOS Setup
       block:
 
-      - include_tasks: tasks/general/software/nixos.yml
+        - ansible.builtin.include_tasks: tasks/general/software/nixos.yml
 
+        # TBD if we are going to use this many, then just have IF statements
+        #  and use blocks within the General area for NixOS vs not-NixOS.
+        - ansible.builtin.include_tasks: tasks/general/software/swap.yml
 
-      # TBD if we are going to use this many, then just have IF statements
-      #  and use blocks within the General area for NixOS vs not-NixOS.
-      - include_tasks: tasks/general/software/swap.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/groups.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/users.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/sudo.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/doas.yml
 
-      - include_tasks: tasks/general/acct_mgmt/groups.yml
-      - include_tasks: tasks/general/acct_mgmt/users.yml
-      - include_tasks: tasks/general/acct_mgmt/sudo.yml
-      - include_tasks: tasks/general/acct_mgmt/doas.yml
+        - ansible.builtin.include_tasks: tasks/general/scripts/root.yml
+        - ansible.builtin.include_tasks: tasks/general/scripts/user.yml
+        - ansible.builtin.include_tasks: tasks/general/scripts/install.yml
 
-      - include_tasks: tasks/general/scripts/root.yml
-      - include_tasks: tasks/general/scripts/user.yml
-      - include_tasks: tasks/general/scripts/install.yml
+        - ansible.builtin.include_tasks: tasks/general/cron/ansible.yml
 
-      - include_tasks: tasks/general/cron/ansible.yml
+        # psutil does not work in NixOS. Cannot figure out how to fix it. Maybe
+        #   time to start looking into home-manager but still not wanting to
+        #   maintain two different GNOME setups. HMMMM!
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/gnome.yml
+          when: workstation
 
-      # psutil does not work in NixOS. Cannot figure out how to fix it. Maybe
-      #   time to start looking into home-manager but still not wanting to
-      #   maintain two different GNOME setups. HMMMM!
-      - include_tasks: tasks/workstation/shared/settings/gnome.yml
-        when: workstation == true
+        # Try including these. Really need to get NixOS working with the rest!
+        #- ansible.builtin.include_tasks: tasks/general/software/telegraf.yml # "Could not find a module for unknown.""
+        - ansible.builtin.include_tasks: tasks/general/tests/services.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/lynis.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/nmap.yml
 
-      # Try including these. Really need to get NixOS working with the rest!
-      #- include_tasks: tasks/general/software/telegraf.yml # "Could not find a module for unknown.""
-      - include_tasks: tasks/general/tests/services.yml
-      - include_tasks: tasks/general/tests/lynis.yml
-      - include_tasks: tasks/general/tests/nmap.yml
-
-      - name: NixOS | Complete
-        meta: end_play
+        - name: NixOS | Complete
+          ansible.builtin.meta: end_play
 
       when: ansible_distribution == "NixOS"
 
 
     ####### General #######
     # Basic setup for all enabled systems.
-
     - name: Main | General Setup
       block:
 
-      - include_tasks: tasks/general/software/swap.yml
-      - include_tasks: tasks/general/software/packages.yml
-      - include_tasks: tasks/general/software/services.yml
-      - include_tasks: tasks/general/software/sendmail.yml
-        when: ansible_system == "FreeBSD"
+        - name: Main | General Setup | Swap
+          ansible.builtin.include_tasks: tasks/general/software/swap.yml
 
-      # Gather again in case missing programs have now been installed.
-      - include_tasks: facts/general/gather.yml
+        - name: Main | General Setup | runit
+          ansible.builtin.include_tasks: tasks/general/software/runit.yml
 
-      - include_tasks: tasks/general/acct_mgmt/groups.yml
-      - include_tasks: tasks/general/acct_mgmt/users.yml
-      - include_tasks: tasks/general/acct_mgmt/sudo.yml
-      - include_tasks: tasks/general/acct_mgmt/doas.yml
+        - name: Main | General Setup | Packages
+          ansible.builtin.include_tasks: tasks/general/software/packages.yml
+          when: internet
 
-      - include_tasks: tasks/general/scripts/root.yml
-      - include_tasks: tasks/general/scripts/user.yml
-      - include_tasks: tasks/general/scripts/install.yml
+        - name: Main | General Setup | Services
+          ansible.builtin.include_tasks: tasks/general/software/services.yml
 
-      - include_tasks: tasks/general/cron/ansible.yml
+        - name: Main | General Setup | Sendmail
+          ansible.builtin.include_tasks: tasks/general/software/sendmail.yml
+          when: ansible_system == "FreeBSD"
+            and internet
 
-      # TODO Need to refactor. Maybe tasks/general/cron/freebsd.yml
-      - include_tasks: tasks/workstation/freebsd/cron/ansible.yml
-        when: ansible_system == "FreeBSD"
+        - ansible.builtin.include_tasks: tasks/general/software/aur.yml
+          when: internet and ansible_pkg_mgr == "pacman"
 
-      - include_tasks: tasks/general/software/metasploit.yml
-        when: pentesting == true
+        # Gather again in case missing programs have now been installed.
+        - ansible.builtin.include_tasks: facts/general/gather.yml
 
-      when: provision == true
+        - ansible.builtin.include_tasks: tasks/general/settings/keyboard.yml
+
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/groups.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/users.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/sudo.yml
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/doas.yml
+          when: internet
+
+        - ansible.builtin.include_tasks: tasks/general/software/env-shared.yml
+          when: internet
+
+        - ansible.builtin.include_tasks: tasks/general/scripts/root.yml
+        - ansible.builtin.include_tasks: tasks/general/scripts/user.yml
+        - ansible.builtin.include_tasks: tasks/general/scripts/install.yml
+
+        - ansible.builtin.include_tasks: tasks/general/cron/ansible.yml
+
+        # TODO Need to refactor. Maybe tasks/general/cron/freebsd.yml
+        - ansible.builtin.include_tasks: tasks/workstation/freebsd/cron/ansible.yml
+          when: ansible_system == "FreeBSD"
+
+        - ansible.builtin.include_tasks: tasks/general/software/metasploit.yml
+          when: internet
+
+      when: provision
 
 
     ####### Workstations #######
     # Additional setup for systems with GUI.
-
     - name: Main | Workstation Setup
       block:
 
-      - include_tasks: facts/workstation/package.yml
+        - ansible.builtin.include_tasks: facts/workstation/package.yml
 
-      # Set Up Desktop Environments #
-      - include_tasks: tasks/workstation/freebsd/software/gpu.yml
-        when: ansible_system == "FreeBSD" and bsd_gpu == true
+        ## Desktop Environments ##
+        - ansible.builtin.include_tasks: tasks/workstation/freebsd/software/gpu.yml
+          when: ansible_system == "FreeBSD"
+            and bsd_gpu
+            and internet
 
-      - include_tasks: tasks/workstation/freebsd/software/gnome.yml
-        when: ansible_system == "FreeBSD"
+        # Window Managers without true Desktop Environments #
+        - ansible.builtin.include_tasks: tasks/workstation/shared/software/dwm.yml
+          when: internet
+        - ansible.builtin.include_tasks: tasks/workstation/shared/software/i3.yml
+          when: internet
 
-      - include_tasks: tasks/workstation/linux/software/gnome.yml
-        when: ansible_system == "Linux"
+        # Polished Desktop Environments #
+        - ansible.builtin.include_tasks: tasks/workstation/freebsd/software/gnome.yml
+          when: ansible_system == "FreeBSD"
+            and internet
 
-      - include_tasks: tasks/workstation/shared/software/dwm.yml
+        - name: Main | Workstation | Fancy Desktop Environments
+          block:
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/gnome.yml
+              when: ansible_service_mgr == "systemd"
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/cinnamon.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/lxqt.yml
+          when: ansible_system == "Linux"
+            and internet
+            # TBD: Implement this: and extra_desktops
 
-      # Software Tasks #
-      - include_tasks: tasks/workstation/linux/software/packages.yml
-        when: ansible_system == "Linux"
+        ## Software Tasks ##
 
-      - include_tasks: tasks/workstation/linux/software/lutris.yml
-        when: ansible_system == "Linux"
+        - name: Main | Workstation Setup | Linux
+          block:
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/packages.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/tlp.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/lutris.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/vscodium.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/vpn.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/nodejs.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/hugo.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/brave.yml
+              when: ansible_pkg_mgr in ("apt", "dnf", "zypper") and not mobile
+          when: ansible_system == "Linux"
+            and internet
 
-      - include_tasks: tasks/workstation/linux/software/vscodium.yml
-        when: ansible_system == "Linux"
+        - ansible.builtin.include_tasks: tasks/workstation/freebsd/software/packages.yml
+          when: ansible_system == "FreeBSD"
+            and internet
 
-      - include_tasks: tasks/workstation/linux/software/brave.yml
-        when: ansible_pkg_mgr in ("apt", "dnf", "zypper") and not mobile
+        - ansible.builtin.include_tasks: tasks/workstation/mac-os/software/brew.yml
+          when: ansible_system == "Darwin"
+            and internet
 
-      - include_tasks: tasks/workstation/linux/software/vpn.yml
-        when: ansible_system == "Linux"
+        ## Configuration Tasks ##
+        - name: Main | Workstation Setup | Configuration
+          block:
+            - ansible.builtin.include_tasks: tasks/workstation/shared/settings/gnome.yml
+            - ansible.builtin.include_tasks: tasks/workstation/shared/settings/cinnamon.yml
+            - ansible.builtin.include_tasks: tasks/workstation/shared/settings/xdg_autostart.yml
 
-      - include_tasks: tasks/workstation/freebsd/software/packages.yml
-        when: ansible_system == "FreeBSD"
+            - ansible.builtin.include_tasks: tasks/workstation/linux/cron/ansible.yml
+              when: ansible_system == "Linux"
+          when: not mobile
 
-      - include_tasks: tasks/workstation/mac-os/software/brew.yml
-        when: ansible_system == "Darwin"
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/nfs.yml
 
-      # Configuration Tasks #
-      - include_tasks: tasks/workstation/shared/settings/gnome.yml
-        when: not mobile
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/rdp.yml
+          when: rdp
 
-      - include_tasks: tasks/workstation/linux/cron/ansible.yml
-        when: ansible_system == "Linux" and not mobile
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/vnc.yml
+          when: vnc
 
-      - include_tasks: tasks/workstation/shared/settings/nfs.yml
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/services.yml
+        - ansible.builtin.include_tasks: tasks/workstation/shared/settings/templates.yml
 
-      - include_tasks: tasks/workstation/shared/settings/rdp.yml
-        when: rdp == true
+        ## Final Tasks (SLOW) ##
+        - name: Main | Workstation Setup | Linux [Slow]
+          block:
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/flatpaks.yml
+              when: flatpak_distro
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/java.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/flutter.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/android.yml
+            - ansible.builtin.include_tasks: tasks/workstation/linux/software/llm.yml
+          when: ansible_system == "Linux"
+            and internet
 
-      - include_tasks: tasks/workstation/shared/settings/vnc.yml
-        when: vnc == true
-
-      - include_tasks: tasks/workstation/shared/settings/services.yml
-
-      # Final Tasks (SLOW) #
-      - include_tasks: tasks/workstation/linux/software/flutter.yml
-        when: ansible_system == "Linux"
-
-      - include_tasks: tasks/workstation/linux/software/android.yml
-        when: ansible_system == "Linux"
-
-      - include_tasks: tasks/workstation/linux/software/flatpaks.yml
-        when: ansible_system == "Linux" and flatpak_distro
-
-      when: workstation == true
+      when: workstation
 
 
 # No longer mining, this is now considered deprecated.
@@ -179,75 +243,87 @@
 #      block:
 #
 #      ##### Setup #####
-#      - include_tasks: tasks/miner/debug.yml
+#      - ansible.builtin.include_tasks: tasks/miner/debug.yml
 #
-#      - include_tasks: tasks/miner/acct_mgmt/users.yml
+#      - ansible.builtin.include_tasks: tasks/miner/acct_mgmt/users.yml
 #
-#      - include_tasks: facts/miner/system.yml
-#      - include_tasks: facts/miner/config.yml
-#      - include_tasks: facts/miner/pool.yml
+#      - ansible.builtin.include_tasks: facts/miner/system.yml
+#      - ansible.builtin.include_tasks: facts/miner/config.yml
+#      - ansible.builtin.include_tasks: facts/miner/pool.yml
 #
 #      ##### Installations #####
 #      ### CPU SECTION ###
 #      # Monero #
-#      - include_tasks: tasks/miner/software/xmr-stak-cpu.yml
+#      - ansible.builtin.include_tasks: tasks/miner/software/xmr-stak-cpu.yml
 #        when: xmr_stak_cpu is defined
 #
 #      ### GPU Section ###
 #      ## Drivers ##
-#      - include_tasks: tasks/miner/drivers/amdgpu.yml
-#        when: ansible_distribution == "Ubuntu" and amdgpu == true
+#      - ansible.builtin.include_tasks: tasks/miner/drivers/amdgpu.yml
+#        when: ansible_distribution == "Ubuntu" and amdgpu
 #
 #      # Ethereum #
-#      - include_tasks: tasks/miner/software/ethminer.yml
-#        when: ethminer == true
+#      - ansible.builtin.include_tasks: tasks/miner/software/ethminer.yml
+#        when: ethminer
 #
-#      - include_tasks: tasks/miner/software/nanominer.yml
-#        when: nanominer == true
+#      - ansible.builtin.include_tasks: tasks/miner/software/nanominer.yml
+#        when: nanominer
 #
 #      ##### Scheduling #####
-#      - include_tasks: tasks/miner/cron/ansible.yml
-#      - include_tasks: tasks/miner/cron/mfn.yml
+#      - ansible.builtin.include_tasks: tasks/miner/cron/ansible.yml
+#      - ansible.builtin.include_tasks: tasks/miner/cron/mfn.yml
 #
-#      when: miner == true
+#      when: miner
 
 
     ####### Servers #######
     # Easy to deploy server configurations.
-
     - name: Main | Server Setup
       block:
 
-      - include_tasks: tasks/server/software/services.yml
+        - ansible.builtin.include_tasks: tasks/server/software/services.yml
 
-      - include_tasks: tasks/server/software/certbot.yml
-        when: certbot == true
-      - include_tasks: tasks/server/cron/certbot.yml
-        when: certbot == true
+        - block:
+            - ansible.builtin.include_tasks: tasks/server/software/certbot.yml
+            - ansible.builtin.include_tasks: tasks/server/cron/certbot.yml
+          when: certbot
 
-      - include_tasks: tasks/server/software/onlyoffice.yml
-        when: onlyoffice == true and ansible_pkg_mgr == "apt"
+        - block:
+            - ansible.builtin.include_tasks: tasks/server/software/onlyoffice.yml
+              when: onlyoffice
+            - ansible.builtin.include_tasks: tasks/server/software/influxdb1.yml
+              when: influxdb1
+            - ansible.builtin.include_tasks: tasks/server/software/influxdb2.yml
+              when: influxdb2
+            - ansible.builtin.include_tasks: tasks/server/software/grafana.yml
+              when: grafana
+          when: ansible_pkg_mgr == "apt"
 
-      - include_tasks: tasks/server/software/influxdb1.yml
-        when: influxdb1 == true and ansible_pkg_mgr == "apt"
+        - ansible.builtin.include_tasks: tasks/server/software/hugo.yml
+          when: hugo
 
-      - include_tasks: tasks/server/software/influxdb2.yml
-        when: influxdb2 == true and ansible_pkg_mgr == "apt"
-
-      - include_tasks: tasks/server/software/grafana.yml
-        when: grafana == true and ansible_pkg_mgr == "apt"
-
-      - include_tasks: tasks/server/software/hugo.yml
-        when: hugo == true
-
-      when: server == true
+      when: server
 
 
     ####### Reporting #######
     # Provide information for analysis.
+    - name: Main | Reporting
+      block:
 
-    - include_tasks: tasks/general/software/telegraf.yml
+        - ansible.builtin.include_tasks: tasks/general/software/telegraf.yml
+          when: internet
 
-    - include_tasks: tasks/general/tests/services.yml
-    - include_tasks: tasks/general/tests/lynis.yml
-    - include_tasks: tasks/general/tests/nmap.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/services.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/lynis.yml
+        - ansible.builtin.include_tasks: tasks/general/tests/nmap.yml
+
+
+    ####### Finish #######
+    - name: Main | Finish
+      block:
+
+        - ansible.builtin.include_tasks: tasks/general/acct_mgmt/notify.yml
+          vars:
+            notify_message: "Provisioning Finished"
+
+        - ansible.builtin.include_tasks: tasks/general/tests/lock_remove.yml

setup.sh

@@ -5,14 +5,25 @@
 
 DIR="$(dirname -- "${BASH_SOURCE[0]}")"
 PROG="$(basename -- "${BASH_SOURCE[0]}")"
-LOCAL=$DIR/local.yml
+LOCAL="$DIR/local.yml"
 URL="https://git.hyperling.com/me/env-ansible"
-BRANCH="main"
+if [[ -z $BRANCH ]]; then
+	export BRANCH="main"
+fi
+
+LINUX_HOSTS_DIR=/etc/ansible
+LINUX_HOSTS_FILE="$LINUX_HOSTS_DIR/hosts"
+FREEBSD_HOSTS_DIR="/usr/local/etc/ansible"
+FREEBSD_HOSTS_FILE="$FREEBSD_HOSTS_DIR/hosts"
+
+HOSTS_DIR="$LINUX_HOSTS_DIR"
+HOSTS_FILE="$LINUX_HOSTS_FILE"
 
 config_dir="/usr/local/etc/hyperling-scm"
 general_config="$config_dir/general.ini"
 workstation_config="$config_dir/workstation.ini"
 server_config="$config_dir/server.ini"
+branch=""
 
 ## Functions ##
 
@@ -32,7 +43,7 @@ function usage {
 	      -g : Enable the General config with test contents.
 	      -w : Enable the Workstation config with test contents.
 	      -s : Enable the Server config with test contents.
-			-f : Display this system's facts.
+	      -f : Display this system's facts.
 	      -h : Display this help text.
 
 	EOF
@@ -45,10 +56,10 @@ while getopts ":lb:gwsfh" arg; do
 	case $arg in
 		l) local="Y" && echo "Running $LOCAL as the playbook." ;;
 		b) branch="$OPTARG" && echo "Using branch $branch instead of $BRANCH." ;;
-		g) create_general="Y" && echo "Requested '$general_config'." ;;
-		w) create_workstation="Y" && echo "Requested '$workstation_config'." ;;
-		s) create_server="Y" && echo "Requested '$server_config'." ;;
-		f) show_facts="Y" ;;
+		g) create_general="Y" && echo "Generating test '$general_config'." ;;
+		w) create_workstation="Y" && echo "Generating test '$workstation_config'." ;;
+		s) create_server="Y" && echo "Generating test '$server_config'." ;;
+		f) show_facts="Y" && echo "Displaying ansible facts then exiting." ;;
 		h) usage ;;
 		*) echo "ERROR: Parameter $OPTARG was not recognized." && usage 1 ;;
 	esac
@@ -60,9 +71,14 @@ if [[ ! -z $1 && $1 != "-"* ]]; then
 	usage 1
 fi
 
-if [[ -z "$local" && "$branch" == "" ]]; then
-	echo "Using default branch $BRANCH."
+if [[ "$branch" == "" ]]; then
 	branch="$BRANCH"
+	if [[ -z "$local" ]]; then
+		echo "Running against default branch '$branch'."
+	else
+		echo "Set branch to '$branch'."
+	fi
+	echo " "
 fi
 
 if [[ -n "$create_general" && -f "$general_config" ]]; then
@@ -92,52 +108,52 @@ if [[ `which ansible > /dev/null; echo $?` != 0 ]]; then
 	if [[ $os == *Debian* || $os == *Ubuntu* || $os == *"Pop!_OS"* || $os == *Mint* || $os == *Parrot* ]]; then
 		sudo apt update
 		sudo apt install -y ansible git <<< N
-		sudo mkdir -p /etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /etc/ansible/hosts'
 	elif [[ $os == *FreeBSD* ]]; then
-		sudo pkg install -y py38-ansible git
-		sudo mkdir -p /usr/local/etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /usr/local/etc/ansible/hosts'
+		sudo pkg install -y -g py*-ansible git
+		HOSTS_DIR="$FREEBSD_HOSTS_DIR"
+		HOSTS_FILE="$FREEBSD_HOSTS_FILE"
 	elif [[ $os == *Arch* || $os == *Manjaro* || $os == *Artix* ]]; then
 		sudo pacman -Sy --noconfirm ansible git
-		sudo mkdir -p /etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /etc/ansible/hosts'
 	elif [[ $os == *Darwin* ]]; then
 		bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
-		echo "TESTING - EXIT!"
-		exit 0
 		brew install ansible git
+		HOSTS_DIR=""
+		HOSTS_FILE=""
 	elif [[ $os == *Fedora* ]]; then
 		sudo dnf install -y ansible git python3-libselinux
-		sudo mkdir -p /etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /etc/ansible/hosts'
 	elif [[ $os == *openSUSE* ]]; then
 		sudo zypper install -y ansible git
-		sudo mkdir -p /etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /etc/ansible/hosts'
 	elif [[ $os == *NixOS* ]]; then
 		$DIR/files/scripts/nixos.sh -b $branch
-		sudo mkdir -p /etc/ansible
-		sudo sh -c 'echo "localhost ansible_connection=local" > /etc/ansible/hosts'
 	else
-		echo -e "ERROR: OS not detected."
+		echo -e "ERROR: OS not recognized."
 		echo -e "$os"
 		exit 1
 	fi
 fi
-echo "Installed!"
+echo -e "- Installed!\n"
+
+if [[ -n $HOSTS_DIR && -n $HOSTS_FILE ]]; then
+	echo "Ensuring hosts file exists..."
+	if [[ ! -e $HOSTS_FILE ]]; then
+		sudo mkdir -pv $HOSTS_DIR
+		sudo sh -c "echo 'localhost ansible_connection=local' > $HOSTS_FILE"
+	fi
+	echo "$HOSTS_FILE: '`cat $HOSTS_FILE`'"
+	echo -e "- Hosts file created successfully!\n"
+fi
 
 if [[ "$show_facts" == "Y" ]]; then
 	echo "Showing Ansible Facts"
 	ansible localhost -m setup --connection=local
+	exit 0
 fi
 
 #echo "Adding Ansible Collections..."
 #ansible-galaxy collection install community.general
-#echo "Added!"
+#echo "- Added!"
 
 # Create basic layouts if configs do not exist and are requested.
-
 if [[ -n "$create_general"
 	|| -n "$create_workstation"
 	|| -n "$create_server" ]]
@@ -145,6 +161,7 @@ then
 	sudo mkdir -pv "$config_dir"
 	MARK1="BEGIN"
 	MARK2="END"
+	echo "Creating placeholder config files..."
 fi
 if [[ -n "$create_general" && ! -f "$general_config" ]]; then
 	function print_general_contents {
@@ -191,20 +208,49 @@ if [[ -n "$create_server" && ! -f "$server_config" ]]; then
 	print_server_contents | sudo tee "$server_config"
 	ls -lh "$server_config"
 fi
+if [[ -n "$create_general"
+	|| -n "$create_workstation"
+	|| -n "$create_server" ]]
+then
+	echo " "
+fi
+
+echo "Verifying this is the only run..."
+ps -ef | grep ansible-playbook | grep -v grep
+ansible_exists="$?"
+lock_file=/tmp/ansible-playbook.lock
+if [[ "$ansible_exists" == 0 ]]; then
+	echo "- Playbook is already being executed. Exiting."
+   exit 0
+elif [[ -e "$lock_file" ]]; then
+	echo "- Removing lock file."
+	sudo mv -v "$lock_file" "${lock_file}.disabled"
+else
+	echo "- No processes or lockfile found."
+fi
+echo " "
 
 echo "Provisioning Ansible..."
-if [[ $local == "Y" ]]; then
+status=""
+if [[ "$local" == "Y" ]]; then
 	sudo ansible-playbook $LOCAL
+	status=$?
 else
 	sudo ansible-pull -U $URL.git --checkout $branch
+	status=$?
+fi
+if [[ "$status" == 0 ]]; then
+	echo -e "- Provisioned!\n"
+else
+	echo -e "\nERROR: Playbook failed with status $status, exiting."
+	exit $status
 fi
-echo "Provisioned!"
 
 echo "Mounting all drives..."
 mount -a
-echo "Mounted!"
+echo -e "- Mounted!\n"
 
-echo "Don't forget to set any new users' passwords!"
+echo -e "Don't forget to set any new users' passwords!\n"
 
 ## Finish ##
 

tasks/general/acct_mgmt/doas.yml

@@ -2,7 +2,7 @@
 # Install and configure doas.
 
 - name: General | Software | DoAs | Facts
-  set_fact:
+  ansible.builtin.set_fact:
     doas_config: |
       permit persist :wheel as root
       permit persist :admin as root
@@ -11,44 +11,47 @@
     doas_conf_file_bsd: /usr/local/etc/doas.conf
 
 - name: General | Software | DoAs | Install
-  package:
+  ansible.builtin.package:
     name:
       - doas
   register: doas_install
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | DoAs | Configure [Linux]
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ doas_conf_file_linux }}"
     block: |
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas Linux'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
+    mode: "644"
   when: not doas_install.failed and ansible_system in ("Linux")
 
 - name: General | Software | DoAs | Configure [BSD]
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ doas_conf_file_linux }}"
     block: |
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas BSD'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
+    mode: "644"
   when: not doas_install.failed and ansible_system in ("FreeBSD")
 
 - name: General | Software | DoAs | Configure [Other]
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}"
     block: |
       {{ doas_config }}
     marker: '# {mark} MANAGED BY ANSIBLE | doas Other'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
+    mode: "644"
   loop:
     - "{{ doas_conf_file_linux }}"
     - "{{ doas_conf_file_bsd }}"
-  when: not doas_install.failed and ansible_system not in ("Linux", "FreeBSD") 
+  when: not doas_install.failed and ansible_system not in ("Linux", "FreeBSD")

tasks/general/acct_mgmt/groups.yml

@@ -1,10 +1,10 @@
 ---
 # Groups that do not come to all distros by default.
 
-- name: General | Account Management | System Groups 
+- name: General | Account Management | System Groups
   group:
     name: "{{ item }}"
-    system: yes
+    system: true
     state: present
   loop:
     - sudo

tasks/general/acct_mgmt/notify.yml

@@ -0,0 +1,15 @@
+---
+# Create and manage permissions for notify log.
+
+- name: General | Notify | Update File
+  ansible.builtin.shell: "{{ item }}"
+  loop:
+    - touch "{{ notify_log_file }}"
+    - chmod 777 "{{ notify_log_file }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0
+
+- name: General | Notify | Add Message
+  ansible.builtin.shell : echo "'Ansible' '{{ notify_message }} @ `date`'" >> "{{ notify_log_file }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0

tasks/general/acct_mgmt/provision_config.yml

@@ -2,19 +2,19 @@
 # Set up directory and files for specifying software needs rather than using hosts file.
 
 - name: General | Account Management | Provisioning Configuration | Variables 1
-  set_fact:
+  ansible.builtin.set_fact:
     prov_dir: "/usr/local/etc/hyperling-scm"
     provision_variables: []
 
 - name: General | Account Management | Provisioning Configuration | Variables 2
-  set_fact:
+  ansible.builtin.set_fact:
     gen_file: "{{ prov_dir }}/general.ini"
     wrk_file: "{{ prov_dir }}/workstation.ini"
     mnr_file: "{{ prov_dir }}/miner.ini"
     srv_file: "{{ prov_dir }}/server.ini"
 
 - name: General | Account Management | Provisioning Configuration | Create Directory
-  file:
+  ansible.builtin.file:
     path: "{{ prov_dir }}"
     state: directory
     mode: '0755'
@@ -23,7 +23,7 @@
 ## General ##
 
 - name: General | Account Management | Provisioning Configuration | General | Create
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ gen_file }}"
     block: |
       ; Please note that all portions require lowercase keys and values.
@@ -101,30 +101,56 @@
       ;            Slows down the rate of services such as telegraf and cron.
       ;              Default: false
       ;
-      ;;;;;;;;;;;;;;;;;;;;         Server Shortcut          ;;;;;;;;;;;;;;;;;;;;
+      ;;;;;;;;;;;;;;;;;;;;         Server Shortcuts         ;;;;;;;;;;;;;;;;;;;;
       ;
       ; For typing `prod` and getting straight to a server, like in env-termux.
       ;
-      ; prod_host : Branch to use on this machine.
+      ; Imagine the command:
+      ;   `ssh prod_user@prod_host:prod_port`
+      ;
+      ; prod_host : Hostname for the production server.
       ;               Example: myserver.com, mywebhost.net
       ;               Default: hyperling.com
       ;
-      ; prod_port : Provide the git host that the machine should poll.
+      ; prod_port : Port for the production server.
       ;               Example: 22, 222, 2222
       ;               Default: 22
       ;
-      ; prod_user : Port of the server host to use for SSH requests.
+      ; prod_user : Username for accessing the production server.
       ;               Example: jim, bob, jeff, anne
       ;               Default: user
       ;
+      ; For pushing MASTER directories to an SFTP server with `send-master`.
+      ;
+      ; Imagine the command:
+      ;   `rsync -auPhz --delete -e 'ssh -p prod_data_port' ./mydata-MASTER/ \
+      ;       prod_data_user@prod_data_host:/prod_data_dir/mydata-clone
+      ;   `
+      ;
+      ; prod_data_host : Branch to use on this machine.
+      ;                    Example: sftp.myserver.com, sftp.mywebhost.net
+      ;                    Default: hyperling.com
+      ;
+      ; prod_data_port : Provide the git host that the machine should poll.
+      ;                    Example: 22, 222, 2222
+      ;                    Default: 22
+      ;
+      ; prod_data_user : Port of the server host to use for SSH requests.
+      ;                    Example: jim, bob, jeff, anne
+      ;                    Default: user
+      ;
+      ; prod_data_dir : Port of the server host to use for SSH requests.
+      ;                   Example: /srv/sftp/
+      ;                   Default: /srv/sftp/
+      ;
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Generic Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | General | Load
-  set_fact:
+  ansible.builtin.set_fact:
     provision:  "{{ lookup('ini', 'enable     file={{gen_file}} default=false') | bool }}"
     user:       "{{ lookup('ini', 'user       file={{gen_file}} default=ling') }}"
     user_desc:  "{{ lookup('ini', 'user_desc  file={{gen_file}} default=Hyperling') }}"
@@ -143,9 +169,18 @@
     prod_host: "{{ lookup('ini', 'prod_host   file={{gen_file}} default=hyperling.com') }}"
     prod_port: "{{ lookup('ini', 'prod_port   file={{gen_file}} default=22') }}"
     prod_user: "{{ lookup('ini', 'prod_user   file={{gen_file}} default=user') }}"
+    prod_data_host: "{{ lookup('ini', 'prod_data_host   file={{gen_file}} default=hyperling.com') }}"
+    prod_data_port: "{{ lookup('ini', 'prod_data_port   file={{gen_file}} default=22') }}"
+    prod_data_user: "{{ lookup('ini', 'prod_data_user   file={{gen_file}} default=user') }}"
+    prod_data_dir: "{{ lookup('ini', 'prod_data_dir   file={{gen_file}} default=/srv/sftp') }}"
+
+- name: General | Account Management | Provisioning Configuration | General | Boolean Check | Swap Block
+  ansible.builtin.set_fact:
+    swap_block: "{{ swap_block | bool }}"
+  when: swap_block in ("true", "false")
 
 - name: General | Account Management | Provisioning Configuration | General | List
-  set_fact:
+  ansible.builtin.set_fact:
     provision_variables: "{{ provision_variables | combine(item) }}"
   loop:
     - { 'provision': "{{ provision }}" }
@@ -166,12 +201,16 @@
     - { 'prod_host': "{{ prod_host }}" }
     - { 'prod_port': "{{ prod_port }}" }
     - { 'prod_user': "{{ prod_user }}" }
+    - { 'prod_data_host': "{{ prod_data_host }}" }
+    - { 'prod_data_port': "{{ prod_data_port }}" }
+    - { 'prod_data_user': "{{ prod_data_user }}" }
+    - { 'prod_data_dir': "{{ prod_data_dir }}" }
 
 
 ## Workstation ##
 
 - name: General | Account Management | Provisioning Configuration | Workstation | Create
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ wrk_file }}"
     block: |
       ;;;;;;; Available options - all require lowercase values ;;;;;;
@@ -207,11 +246,11 @@
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Workstation Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | Workstation | Load
-  set_fact:
+  ansible.builtin.set_fact:
     workstation: "{{ lookup('ini', 'enable  file={{wrk_file}} default=false') | bool }}"
     coding:      "{{ lookup('ini', 'coding  file={{wrk_file}} default=false') | bool }}"
     sdks:        "{{ lookup('ini', 'sdks    file={{wrk_file}} default=false') | bool }}"
@@ -223,8 +262,13 @@
     mobile:      "{{ lookup('ini', 'mobile  file={{wrk_file}} default=false') | bool }}"
     redmode:     "{{ lookup('ini', 'redmode file={{wrk_file}} default=true' ) | bool }}"
 
+- name: General | Account Management | Provisioning Configuration | Workstation | Boolean Check | Editing
+  ansible.builtin.set_fact:
+    editing: "{{ editing | bool }}"
+  when: editing in ("true", "false")
+
 - name: General | Account Management | Provisioning Configuration | Workstation | List
-  set_fact:
+  ansible.builtin.set_fact:
     provision_variables: "{{ provision_variables | combine(item) }}"
   loop:
     - { 'workstation': "{{ workstation }}" }
@@ -242,7 +286,7 @@
 ### Miner ##
 #
 #- name: General | Account Management | Provisioning Configuration | Miner | Create
-#  blockinfile:
+#  ansible.builtin.blockinfile:
 #    path: "{{ mnr_file }}"
 #    block: |
 #      ;;;;;;; Available options - all require lowercase values ;;;;;;
@@ -283,11 +327,11 @@
 #      [global]
 #    marker: '; {mark} MANAGED BY ANSIBLE | Miner Config'
 #    state: present
-#    create: yes
-#    backup: yes
+#    create: true
+#    backup: true
 #
 #- name: General | Account Management | Provisioning Configuration | Miner | Load
-#  set_fact:
+#  ansible.builtin.set_fact:
 #    miner:              "{{ lookup('ini', 'enable             file={{mnr_file}} default=false') | bool }}"
 #    amdgpu:             "{{ lookup('ini', 'amdgpu             file={{mnr_file}} default=false') | bool }}"
 #    nanominer:          "{{ lookup('ini', 'nanominer          file={{mnr_file}} default=false') | bool }}"
@@ -302,7 +346,7 @@
 #    xmr_stak_cpu:       "{{ lookup('ini', 'xmr_stak_cpu       file={{mnr_file}} default=false') | bool }}"
 #
 #- name: General | Account Management | Provisioning Configuration | Miner | List
-#  set_fact:
+#  ansible.builtin.set_fact:
 #    provision_variables: "{{ provision_variables | combine(item) }}"
 #  loop:
 #    - { 'miner': "{{ miner }}" }
@@ -322,7 +366,7 @@
 ## Server ##
 
 - name: General | Account Management | Provisioning Configuration | Server | Create
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ srv_file }}"
     block: |
       ;;;;;;; Parameters ;;;;;;
@@ -352,11 +396,11 @@
       [global]
     marker: '; {mark} MANAGED BY ANSIBLE | Server Config'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: General | Account Management | Provisioning Configuration | Server | Load
-  set_fact:
+  ansible.builtin.set_fact:
     server:     "{{ lookup('ini', 'enable     file={{srv_file}} default=false') | bool }}"
     domain:     "{{ lookup('ini', 'domain     file={{srv_file}} default=hyperling.com') }}"
     onlyoffice: "{{ lookup('ini', 'onlyoffice file={{srv_file}} default=false') | bool }}"
@@ -367,7 +411,7 @@
     hugo:       "{{ lookup('ini', 'hugo       file={{srv_file}} default=false') | bool }}"
 
 - name: General | Account Management | Provisioning Configuration | Server | List
-  set_fact:
+  ansible.builtin.set_fact:
     provision_variables: "{{ provision_variables | combine(item) }}"
   loop:
     - { 'server': "{{ server }}" }
@@ -383,12 +427,17 @@
 ## Exit if not turned on yet ##
 
 - name: General | Account Management | Provisioning Configuration | Exit Check
-  shell: echo "Please configure the config files in {{ prov_dir }} then try again." && exit 1
-  when: provision != true
+  block:
+    - name: General | Account Management | Provisioning Configuration | Exit Check | Message
+      ansible.builtin.debug:
+        msg: "Please configure the config files in {{ prov_dir }} then try again."
+    - name: General | Account Management | Provisioning Configuration | Exit Check | Exit
+      ansible.builtin.meta: end_play
+  when: not provision
 
 
 ## Display values ##
 
 - name: General | Account Management | Provisioning Configuration | Print
-  debug:
+  ansible.builtin.debug:
     var: provision_variables

tasks/general/acct_mgmt/sudo.yml

@@ -2,32 +2,33 @@
 # Ensure the proper users have sudo access.
 
 - name: General | Account Management | Sudo | Copy Ansible
-  copy:
+  ansible.builtin.copy:
     src: sudo/sudoers_ansible
     dest: "{{ sudoers_install_dir }}"
     owner: root
     group: "{{ root_group }}"
-    mode: 0440
+    mode: "0440"
 
 - name: General | Account Management | Sudo | Copy Sudo Group
-  copy:
+  ansible.builtin.copy:
     src: sudo/sudoers_sudo
     dest: "{{ sudoers_install_dir }}"
     owner: root
     group: "{{ root_group }}"
-    mode: 0440
+    mode: "0440"
 
 # Disable these two lines in openSUSE default configuration.
 #Defaults targetpw   # ask for the password of the target user i.e. root
 #ALL   ALL=(ALL) ALL   # WARNING! Only use this together with 'Defaults targetpw'!
 - name: General | Account Management | Sudo | Disable openSUSE Root PW Prompt
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ sudoers_config }}"
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
+    mode: "644"
   loop:
     - { "key": '^[\#]?Defaults targetpw',   "value": '#Defaults targetpw'}
     - { "key": '^[\#]?ALL   ALL\=\(ALL\) ALL', "value": '#ALL   ALL=(ALL) ALL'}

tasks/general/acct_mgmt/users.yml

@@ -4,62 +4,62 @@
 ## Variables ##
 
 - name: General | Account Management | Users | Use BASH (Default)
-  set_fact:
+  ansible.builtin.set_fact:
     user_shell: "{{ bash_exec.stdout }}"
 
 - name: General | Account Management | Users | Allow BASH (Arch)
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /etc/shells
     regexp: "{{ bash_exec.stdout }}"
     line: "{{ bash_exec.stdout }}"
     insertbefore: "# End of file"
-    backup: yes
-    create: no
+    backup: true
+    create: false
     state: present
-  when: ansible_distribution == "Archlinux"
+  when: ansible_pkg_mgr == "pacman"
 
 #- name: General | Account Management | Users | Use ZSH (Arch+Manjaro)
-#  set_fact:
+#  ansible.builtin.set_fact:
 #    user_shell: "{{ zsh_exec.stdout }}"
-#  when: ansible_distribution == "Archlinux"
+#  when: ansible_pkg_mgr == "pacman"
 #
 #- name: General | Account Management | Users | Allow ZSH (Arch)
-#  lineinfile:
+#  ansible.builtin.lineinfile:
 #    path: /etc/shells
 #    regexp: "{{ zsh_exec.stdout }}"
 #    line: "{{ zsh_exec.stdout }}"
 #    insertbefore: "# End of file"
-#    backup: yes
-#    create: no
+#    backup: true
+#    create: false
 #    state: present
-#  when: ansible_distribution == "Archlinux"
+#  when: ansible_pkg_mgr == "pacman"
 
 
 ## Root ##
 
 - name: General | Account Management | Users | Root
-  user:
+  ansible.builtin.user:
     name: root
     shell: "{{ bash_exec.stdout }}"
-    create_home: yes
-    generate_ssh_key: yes
+    create_home: true
+    generate_ssh_key: true
   register: user_root
 
 
 ## Scheduler ##
 
 - name: General | Account Management | Users | Ansible
-  user:
+  ansible.builtin.user:
     name: ansible
     comment: Ansible
-    system: yes
+    system: true
   register: user_ansible
 
 
 ## Superuser ##
 
 - name: General | Account Management | Users | User
-  user:
+  ansible.builtin.user:
     name: "{{ user }}"
     comment: "{{ user_desc }}"
     groups:
@@ -67,23 +67,26 @@
       - video
       - render
       - wheel
-    append: yes
+    append: true
     shell: "{{ user_shell }}"
-    create_home: yes
-    generate_ssh_key: yes
+    create_home: true
+    generate_ssh_key: true
   register: user_user
 
 - name: General | Account Management | Users | User | Test Logging In
-  shell: "echo SUCCESS"
+  ansible.builtin.shell: "echo SUCCESS"
   args:
     executable: "{{ user_shell }}"
+  become: true
   become_user: "{{ user }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0
 
 
 ## Folders ##
 
 - name: General | Account Management | Users | Root | Create Folders
-  file:
+  ansible.builtin.file:
     path: "{{ item }}"
     state: directory
     mode: '0755'
@@ -94,7 +97,7 @@
   when: user_root.home != ""
 
 - name: General | Account Management | Users | User | Create Folders
-  file:
+  ansible.builtin.file:
     path: "{{ item }}"
     state: directory
     mode: '0755'
@@ -103,31 +106,59 @@
     - "{{ user_user.home }}/TRASH"
     - "{{ user_user.home }}/Downloads"
     - "{{ user_user.home }}/Reports"
+    - "{{ user_user.home }}/Torrentz"
+    - "{{ user_user.home }}/Seedz"
+  become: true
   become_user: "{{ user }}"
   when: user_user.home != ""
 
 - name: General | Account Management | Users | User | Create Folders | Coding
-  file:
+  ansible.builtin.file:
     path: "{{ item }}"
     state: directory
     mode: '0755'
   loop:
     - "{{ user_user.home }}/Code"
+  become: true
   become_user: "{{ user }}"
-  when: user_user.home != "" and coding == true
+  when: user_user.home != "" and coding
 
 - name: General | Account Management | Users | Home Permissions
-  shell: "chmod 700 {{ user_user.home }}/../*"
+  ansible.builtin.shell: "chmod 700 {{ user_user.home }}/../*"
+  register: shell_check
+  changed_when: shell_check.rc == 0
 
 
 ## Files ##
 
+- name: General | Account Management | Users | Files | Profile Variables
+  ansible.builtin.set_fact:
+    export_path_additions: export PATH="$HOME/bin:{{ shared_rc_bin }}:$PATH:{{ global_bin }}"
+    export_path_sbin: export PATH="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
+    #export_terminal: export TERMINAL="alacritty" # colors look weird.
+    export_terminal: export TERMINAL="kitty"
+    export_browser: |
+      function find-firefox {
+        which firefox 2>/dev/null ||
+        which firefox-esr 2>/dev/null ||
+        which firefox-flatpak 2>/dev/null
+      }
+      export BROWSER="`find-firefox`"
+    keyboard_settings: |
+      if [[ -n "$XDG_SESSION_ID" ]]; then
+        setxkbmap -layout us -variant altgr-intl
+      fi
+    export_notify: |
+      export NOTIFY="`which fyi 2>/dev/null || which notify-send 2>/dev/null`"
+      function notify() {
+        $NOTIFY $@
+      }
+
 - name: General | Account Management | Users | Files | RC Variables
-  set_fact:
+  ansible.builtin.set_fact:
     alias_cp: alias cp='cp -v'
     alias_mv: alias mv='mv -v'
     alias_rm: alias rm='echo "Use mv ~/TRASH/ instead!"'
-    export_path_additions: export PATH="~/bin:"{{ global_bin }}":$PATH"
     function_wttr: |
       function weather() {
         # 20210301 - Someone showed me an awesome weather API! Had to implement it!
@@ -145,7 +176,39 @@
         fi
         curl "https://wttr.in/${1//\ /+}"
       }
-    export_PS1: export PS1='[\u@\h \w]\$ '
+    export_PS1: |
+      ## Prompts ##
+
+      # Old Trusty
+      #export PS1='[\u@\h \w]\$ '
+
+      # 20251201 - Add time.
+      #export PS1='[\t \u@\h \w]\$ '
+
+      # 20251201 - Add colors.
+      # This helps to determine the color palette numbers:
+      #  https://robotmoon.com/bash-prompt-generator/
+      # Colors have been moved to env-shared project's .rc_shared file.
+
+      if [[ "$USER" == "root" || $UID == 0 ]]; then
+        CLR_BRACKETS=$BOLD$YELLOW
+        CLR_TIME=$BOLD$ORANGE
+        CLR_USER=$BOLD$SCARLET
+        CLR_DIR=$BOLD$RED
+        CLR_PROMPT=$BOLD$GRAY
+      else
+        CLR_BRACKETS=$RESET
+        CLR_TIME=$BOLD$PURPLE
+        CLR_USER=$BOLD$ORANGE
+        CLR_DIR=$BOLD$GREEN
+        CLR_PROMPT=$RESET
+      fi
+
+      export PS1='\[$CLR_BRACKETS\][\[$CLR_TIME\]\t \[$CLR_USER\]\u@\h \[$CLR_DIR\]\w\[$CLR_BRACKETS\]]\[$CLR_PROMPT\]\$ \[$RESET\]'
+
+      export PS2='\[$CLR_BRACKETS\](\[$CLR_TIME\]>\[$CLR_USER\]^\[$CLR_DIR\].\[$CLR_USER\]^\[$CLR_BRACKETS\])\[$CLR_TIME\]> \[$RESET\]'
+
+      ## End Prompts ##
     alias_remount: |
       alias remount='
         sudo umount /mnt/*
@@ -192,6 +255,12 @@
           {{ update_package_manager }}
         fi
 
+        if [[ "$only_flat" != "Y" && "$only_sys" != "Y" ]]; then
+          {{ update_npm }}
+        else
+          echo -e "\n*** Skipping NPM ***\n\n"
+        fi
+
         if [[ "$shutdown" == "Y" && "{{ battery }}" == "True" ]]; then
           echo -e "\n*** Only System Updates - Skipping Flatpak ***\n\n"
         elif [[ "$only_sys" == "Y" ]]; then
@@ -243,7 +312,7 @@
       alias init-video='
         mkdir -v raw
         mkdir -v exports
-        cp ~/Templates/*video* ./
+        cp $HOME/Templates/*video* ./
       '
       alias init-vid=init-video
       alias init-program='
@@ -259,6 +328,7 @@
       }
       function goodbye {
         update -yg
+        bye
       }
     metasploit_aliases: |
       alias metasploit="msfconsole"
@@ -297,7 +367,7 @@
       alias trashed-cleanup="clean-trashed"
       alias trashed-clean="clean-trashed"
     function_check_trash: |
-      function check-trash() {
+      function check-trash-old() {
         unset OPTIND
         unset clean
         unset network
@@ -392,14 +462,14 @@
         echo "Checking but not cleaning /var/mail..."
         du -ha /var/mail | sort -h
         if [[ $clean == "Y" ]]; then
-          clean-trashed "~/"
+          clean-trashed "$HOME/"
         fi
         return 0
       }
       alias check_trash="check-trash"
-    alias_clean_trash: alias clean-trash='check-trash --clean'
-    alias_trash_check: alias trash-check='check-trash'
-    alias_trash_clean: alias trash-clean='trash-check --clean'
+    alias_trash_check: alias trash-check='check-trash-old'
+    alias_clean_trash: alias clean-trash='check-trash-old --clean'
+    alias_trash_clean: alias trash-clean='clean-trash'
     alias_clean_dir: |
       function clean-dir() {
         sudo du -hs
@@ -453,6 +523,13 @@
           return 0
         fi
 
+        if [[ -f ./prep.sh ]]; then
+          echo "Running prep.sh first..."
+          ./prep.sh
+        fi
+
+        export BUILD_TIMESTAMP="`date`"
+
         docker compose build &&
         docker compose down &&
         docker compose up -d
@@ -475,6 +552,13 @@
           return 0
         fi
 
+        if [[ -f ./prep.sh ]]; then
+          echo "Running prep.sh first..."
+          ./prep.sh
+        fi
+
+        export BUILD_TIMESTAMP="`date`"
+
         docker compose pull &&
         docker compose build &&
         docker compose down &&
@@ -519,6 +603,14 @@
           docker ps
           return;
         fi
+
+        if [[ -f ./prep.sh ]]; then
+          echo "Running prep.sh first..."
+          ./prep.sh
+        fi
+
+        export BUILD_TIMESTAMP="`date`"
+
         echo "*** Upgrading Images ***" &&
           docker compose pull &&
         echo "*** Building Containers ***" &&
@@ -544,6 +636,11 @@
           return 0
         fi
 
+        if [[ -f ./prep.sh ]]; then
+          echo "Running prep.sh first..."
+          ./prep.sh
+        fi
+
         docker compose down &&
         docker compose up -d
 
@@ -559,37 +656,11 @@
       alias docker-start="docker compose up -d && docker compose start"
       alias docker-prep="docker compose pull && docker compose build"
     alias_code_check: |
-      alias code-check='
-        echo "Checking ~/Code directory for git changes."
-        ls -d ~/Code/* | while read project; do
-          if [[ ! -d $project ]]; then
-            continue
-          fi
-          echo -e "\n*** `basename $project` ***"
-          cd $project
-          if [[ -d .git ]]; then
-            git ls-remote --exit-code --heads origin dev
-            dev_exists="$?"
-            if [[ "$dev_exists" == 0 ]]; then
-              git switch dev
-            elif [[ "$dev_exists" == 2 ]]; then
-              git switch main
-            else
-              echo "ERROR: Unknown status for dev_exists, '$dev_exists'."
-              continue
-            fi
-            git pull
-            git push
-          else
-            echo "Not a Git project, skipping!"
-          fi
-        done
-        echo -e "\nDone!"
-      '
+      alias code-check='git-check $HOME/Code'
       alias code-sync='code-check'
     alias_code_reset: |
       alias code-reset='
-        ls -d ~/Code/* | while read project
+        ls -d $HOME/Code/* | while read project
           do echo "*** `basename $project` ***"
           cd $project
           git stash
@@ -600,12 +671,13 @@
         done
       '
     function_code_reseed: |
-      function git_projects_to_sync {
+      function git_projects_to_sync() {
         # Projects should be followed by the current development branch name.
         cat <<- EOF
           env-ansible dev
           env-docker dev
           env-termux dev
+          env-shared dev
           env-obtainium-hyperling dev
           nodejs-website dev
           ebook-health-protocol dev
@@ -614,11 +686,8 @@
           ebook-narcissism-healing dev
           ebook-forest-howto dev
           ebook-template main
-          flutter-expense-tracker dev
-          flutter-social-traveler-app dev
-          nodejs-social-traveler-server dev
           misc-spare-change main
-          flutter-buddy-website dev
+          flutter-expense-tracker dev
           flutter-sunset-alarm dev
           android-infinite-timer dev
           android-carb-up dev
@@ -626,16 +695,14 @@
           android-45-minute-rule dev
           android-tictactoe dev
           hugo-jackanope dev
-          hugo-website dev
+          hugo-recipes dev
+          hugo-rvr dev
+          nomadic-weather dev
+          nomadic-weather.wiki main
       EOF
+      # Above EOF cannot be indented unless using a tab, which would be mixed with spaces.
       }
-      function code-reseed {
-        # Unseed current projects.
-        echo -e "\n*** Move old projects to TRASH ***"
-        unseed_dir="$HOME/TRASH/`date +%Y%m%d_%H%M%S`_UnseededCodeProjects"
-        mkdir -pv "$unseed_dir"
-        mv -v ~/Code/* "$unseed_dir"/ 2>/dev/null
-
+      function code_seed() {
         # Git repo information.
         git_repo_ssh={{ git_repo_ssh }}
         git_main_project={{ git_project }}
@@ -645,18 +712,34 @@
         git_projects_to_sync | while read git_project git_branch; do
           echo -e "\n*** $git_project ***"
 
-          # Project folder manipulation.
+          # Project folder name manipulation.
           dest_folder="$git_project"
           if [[ "$dest_folder" == "flutter-"* ]]; then
-            echo "Using '_' for Flutter Project"
+            echo "FLUTTER: Removing 'flutter-' and using '_' rather than '-'."
+            dest_folder="${dest_folder//flutter-/}"
             dest_folder="${dest_folder//-/_}"
           fi
 
-          # Download of the project.
-          git clone ${git_repo_ssh_basename}${git_project} \
-            --branch $git_branch ~/Code/$dest_folder
+          # Download the project.
+          if [[ ! -d $HOME/Code/$dest_folder ]]; then
+            git clone ${git_repo_ssh_basename}${git_project} \
+              --branch $git_branch $HOME/Code/$dest_folder
+          else
+            echo "'$dest_folder' already exists, skipping."
+          fi
         done
       }
+      alias code-seed="code_seed "
+      function code_reseed() {
+        # Unseed current projects.
+        echo -e "\n*** Move old projects to TRASH ***"
+        unseed_dir="$HOME/TRASH/`date +%Y%m%d_%H%M%S`_UnseededCodeProjects"
+        mkdir -pv "$unseed_dir"
+        mv -v $HOME/Code/* "$unseed_dir"/ 2>/dev/null
+
+        code_seed
+      }
+      alias code-reseed="code_reseed "
     function_clean_filenames: |
       function clean-filenames() {
         # Must provide the directory you'd like to clean all the filenames in.
@@ -686,8 +769,6 @@
         done
         echo -e "\nDone!\n"
       }
-    alias_clone: |
-      alias clone="rsync -auPhz --delete --exclude '.gradle' --exclude 'app/build'"
     export_hyperling: |
       export HYPERLING6="2a07:e03:3:80::1"
       export HYPERLING4="185.130.47.173"
@@ -697,22 +778,33 @@
       if [[ -e $DOCKER_SOURCE && $LOGNAME == "root" ]]; then
         source $DOCKER_SOURCE
       fi
-    alias_scan: |
-      alias scan="nmap -A -p- --script=vuln"
+    export_prod:
+      export PROD_HOST="{{ prod_host }}"
+      export PROD_PORT="{{ prod_port }}"
+      export PROD_USER="{{ prod_user }}"
+
+      export PROD_GIT_HOST="{{ git_host }}"
+      export PROD_GIT_PORT="{{ git_ssh_port }}"
+      export PROD_GIT_USER="{{ git_user }}"
+
+      export PROD_DATA_HOST="{{ prod_data_host }}"
+      export PROD_DATA_PORT="{{ prod_data_port }}"
+      export PROD_DATA_USER="{{ prod_data_user }}"
+      export PROD_DATA_DIR="{{ prod_data_dir }}"
     alias_prod: |
       alias prod="ssh -p {{ prod_port }} {{ prod_user }}@{{ prod_host }}"
     function_clean_code: |
-      function clean-code {
+      function clean-code() {
         echo -e "******* Android *******\n*** Build Caches ***"
-        find ~/Code/android-*/app -maxdepth 1 -type d -name "build" \
+        find $HOME/Code/android-*/app -maxdepth 1 -type d -name "build" \
           -exec du -hs {} \; -exec rm -rf {} \;
         echo -e "\n*** Gradle Caches ***"
-        find ~/Code/android-*/ -maxdepth 1 -type d -name ".gradle" \
+        find $HOME/Code/android-*/ -maxdepth 1 -type d -name ".gradle" \
           -exec du -hs {} \; -exec rm -rf {} \;
 
         echo -e "******* Flutter *******"
-        ls ~/Code | grep flutter | while read project; do
-          cd ~/Code/$project
+        ls $HOME/Code | grep flutter | while read project; do
+          cd $HOME/Code/$project
           pwd
           flutter clean
           echo -e "\n"
@@ -720,7 +812,7 @@
         cd
 
         echo -e "******* PDFs *******"
-        find ~/Code/ebook-* -name "*.pdf" -exec du -h {} \; -delete | sort -h
+        find $HOME/Code/ebook-* -name "*.pdf" -exec du -h {} \; -delete | sort -h
 
         echo -e "\n*** Done! ***"
       }
@@ -738,7 +830,7 @@
       alias system-killer="kill-system"
     function_update_sdks: |
       if [[ "$workstation" == "true" && "$coding" == "true" ]]; then
-        function update-sdks {
+        function update-sdks() {
           echo -e "******* Update SDKs *******\n*** Android - START ***"
           yes | sdkmanager --update
           yes | sdkmanager --licenses
@@ -756,7 +848,7 @@
         alias sdk-updater="update-sdks"
       fi
     function_ansible_vars: |
-      function ansible-var-list {
+      function ansible-var-list() {
         cat << EOF
           provision
           battery
@@ -769,7 +861,7 @@
           domain
       EOF
       }
-      function ansible-vars {
+      function ansible-vars() {
         ansible-var-list | while read var; do
           echo "$var = ${!var}"
         done
@@ -779,26 +871,15 @@
       alias chmod='chmod -c'
     alias_iftop: |
       alias iftop='sudo iftop'
-    alias_ls: |
-      alias l='ls'
-      alias ll='ls -alh'
-      alias lh='ls -ash'
     alias_progs: |
       alias progs='ps -ef'
     alias_nethogs: |
       alias nethogs='sudo nethogs'
     alias_ansible_facts: |
       alias ansible-facts='ansible localhost -m setup --connection=local'
-    function_now: |
-      function now {
-        date "+%Y%m%d-%H%M%S"
-      }
-      function today {
-        date "+%Y%m%d"
-      }
     function_backup: |
       export BACKUP_DIR="/srv/backup"
-      function backup {
+      function backup() {
         /usr/local/bin/backup_system.sh
       }
       alias backup-system="backup"
@@ -811,7 +892,7 @@
     function_pull_prod_backups: |
       export DOCKER="Docker"
       export SYSTEM="System"
-      function pull_prod_backup {
+      function pull_prod_backup() {
         if [[ -z "$1" || ("$1" != "$DOCKER" && "$1" != "$SYSTEM") ]]; then
           echo "ERROR: Parameter 1 not correct, expecting '$DOCKER' or '$SYSTEM'."
           return 1
@@ -836,10 +917,10 @@
           rmdir -v tmp
         else
           echo "Failed!"
-          mv tmp ~/TRASH/"tmp_`now`"
+          mv tmp $HOME/TRASH/"tmp_`now`"
         fi
       }
-      function pull_prod_backups {
+      function pull_prod_backups() {
         dir="ProductionBackups-Pulled`today`"
         mkdir -pv "$dir"
         cd "$dir"
@@ -861,15 +942,8 @@
       alias prod-backup="pull_prod_backups"
       alias pull-prod="pull_prod_backups"
       alias prod-pull="pull_prod_backups"
-    function_log: |
-      function log {
-        echo -e "$1"
-      }
-      function blog {
-        echo -e "\n\n$1\n\n"
-      }
     function_debian_upgrade: |
-      function debian-upgrade {
+      function debian-upgrade() {
         typeset -l OLD NEW
         OLD="$1"
         NEW="$2"
@@ -940,9 +1014,9 @@
       alias upgrade-debian="debian-upgrade"
     function_ebook_convert: |
       # Regenerate all eBook projects at once.
-      function ebook-convert {
-        find ~/Code/ebook-* -name "*.pdf" -print -delete
-        find ~/Code/ebook-* -name convert.sh -print -exec bash "{}" \;
+      function ebook-convert() {
+        find $HOME/Code/ebook-* -name "*.pdf" -print -delete
+        find $HOME/Code/ebook-* -name convert.sh -print -exec bash "{}" \;
       }
       alias ebooks="ebook-convert"
       alias convert="ebook-convert"
@@ -951,7 +1025,7 @@
       alias sudo="sudo "
     function_load_branch: |
       # Change a branch to point at another.
-      function load-branch {
+      function load-branch() {
         rcvr="$1" # branch which we want to modify
         base="$2" # branch with the changes we want
 
@@ -1012,7 +1086,7 @@
       alias reset-stage="load-branch stage main"
       alias reset-dev="load-branch dev main"
       function check-code-branches {
-        for dir in ~/Code/*/; do
+        for dir in $HOME/Code/*/; do
           cd $dir
           pwd
           git ls-remote --heads
@@ -1024,7 +1098,7 @@
       alias check-branch="git ls-remote --heads"
       alias branch-check="check-branch"
     alias_reload_bash: |
-      alias reload-bash="source ~/.bashrc"
+      alias reload-bash="source $HOME/.bashrc"
       alias bash-reload="reload-bash"
       alias shell-reload="reload-bash"
       alias reload-shell="reload-bash"
@@ -1043,10 +1117,10 @@
     alias_flatpak_clean: |
       alias flatpak-clean="flatpak uninstall --unused"
     alias_commit: |
-      function commit_usage {
+      function commit_usage() {
         echo 'Usage: commit "This is a commit message"'
       }
-      function commit {
+      function commit() {
         if [[ -z "$1" ]]; then
           echo "ERROR: Message must be provided."
           commit_usage
@@ -1063,9 +1137,115 @@
         status="$?"
         return "$status"
       }
+    function_loop: |
+      function loop() {
+        cmd="$@"
+        sleep=""
+        sleep_time=5
+        if [[ "$cmd" != *"sleep"* ]]; then
+          sleep='echo -e "`date` - Sleeping for $sleep_time... \n"; sleep $sleep_time'
+        fi
+        count=0
+        while true; do
+          (( count++ ))
+          echo "`date` - Loop $count"
+          eval $cmd
+          eval $sleep
+        done;
+      }
+      alias try="loop "
+    source_shared: |
+      if [ -f $HOME/.rc_shared ]; then
+        source $HOME/.rc_shared
+      fi
+    process_notify_log: |
+      if [[ -e {{ notify_log_file }} ]]; then
+        cp "{{ notify_log_file }}" "{{ notify_log_file_wip }}" 1>/dev/null
+        echo -n "" > "{{ notify_log_file }}"
+        cat "{{ notify_log_file_wip }}" | while read title message; do
+          notify-send "$title" "$message"
+        done
+        sh -c "rm '{{ notify_log_file_wip }}'"
+      fi
+    function_reconnect: |
+      function reconnect() {
+        test_domain="git.hyperling.com"
+        test_connection() {
+          ping -c 3 $test_domain
+          status="$?"
+          echo "* Status Returned: '$status'"
+          return $status
+        }
+        test_connection &&
+          echo -e "\n* Looks good! Not trying anything." &&
+          return 0 ||
+          echo -e "\n* Connection failed, troubleshooting..."
+
+        show_connection() {
+          ip addr | grep ' UP '
+          ip addr | grep ' inet'
+          #ip addr | grep -i 'mullvad'
+        }
+        echo -e "\n* Current Connections:"
+        show_connection
+
+        reset_mullvad() {
+          mullvad disconnect && sleep 5 && mullvad connect && sleep 10
+        }
+        echo -e "\n* Turning Mullvad Off & On Again"
+        reset_mullvad
+        echo "Done!"
+
+        echo -e "\n* Checking Connections"
+        show_connection
+
+        echo -e "\n* Testing Again..."
+        test_connection &&
+          echo -e "\n* Looks good! Not trying anything else." &&
+          return 0 ||
+          echo -e "\n* Connection failed, troubleshooting more..."
+
+        reset_wifi() {
+          wifi off
+          sleep 5
+          wifi on
+          sleep 10
+        }
+        echo -e "\n* Turning WiFi Off & On Again"
+        reset_wifi
+        echo "Done!"
+
+        echo -e "\n* Testing Again..."
+        test_connection &&
+          echo -e "\n* Looks good now!" &&
+          return 0 ||
+          echo -e "\n* Connection still failed, maybe try rebooting?"
+      }
+      alias test_wifi="reconnect"
+      alias test_network="reconnect"
+      alias test_connection="reconnect"
+      alias test_connections="reconnect"
+      alias fix_wifi="reconnect"
+      alias fix_network="reconnect"
+      alias fix_connection="reconnect"
+      alias fix_connections="reconnect"
+    function_reset_android_studio: |
+      # Useful after Android Studio is closed improperly. Resets all settings.
+      function reset_android_studio() {
+        mv -v ~/.var/app/com.google.AndroidStudio ~/TRASH/com.google.AndroidStudio-`date +"%Y%m%d"`
+      }
+      alias reset-android-studio="reset_android_studio "
+
 
 - name: General | Account Management | Users | Files | Common Variable
-  set_fact:
+  ansible.builtin.set_fact:
+    profile_common: |
+      {{ export_path_additions }}
+      {{ export_path_sbin }}
+      {{ export_terminal }}
+      {{ export_browser }}
+      {{ keyboard_settings }}
+      {{ export_notify }}
     rc_common: |
       # Fixes "command not found" when using aliases within functions.
       shopt -s expand_aliases
@@ -1082,7 +1262,7 @@
       export server="{{ server }}"
       export domain="{{ domain }}"
 
-      {{ export_path_additions }}
+      {{ source_shared }}
       {{ alias_cp }}
       {{ alias_mv }}
       {{ alias_rm }}
@@ -1116,10 +1296,9 @@
       {{ function_code_reseed }}
       {{ function_clean_filenames }}
       {{ function_clean_filenames_tree }}
-      {{ alias_clone }}
       {{ export_hyperling }}
       {{ source_docker_env }}
-      {{ alias_scan }}
+      {{ export_prod }}
       {{ alias_prod }}
       {{ function_clean_code }}
       {{ alias_kill_battery }}
@@ -1128,14 +1307,11 @@
       {{ function_ansible_vars }}
       {{ alias_permission_commands }}
       {{ alias_iftop }}
-      {{ alias_ls }}
       {{ alias_progs }}
       {{ alias_nethogs }}
       {{ alias_ansible_facts }}
-      {{ function_now }}
       {{ function_backup }}
       {{ function_pull_prod_backups }}
-      {{ function_log }}
       {{ function_debian_upgrade }}
       {{ function_ebook_convert }}
       {{ alias_sudo }}
@@ -1146,26 +1322,53 @@
       {{ alias_docker_other }}
       {{ alias_flatpak_clean }}
       {{ alias_commit }}
+      {{ function_loop }}
+      {{ process_notify_log }}
+      {{ function_reconnect }}
+      {{ function_reset_android_studio }}
+
+- name: General | Account Management | Users | Files | .profile + .xsessionrc
+  ansible.builtin.blockinfile:
+    path: "{{ user_user.home }}/{{ item }}"
+    block: |
+      {{ profile_common }}
+
+      [[ $(whoami) != "root" ]] &&
+        echo "`date` - Ansible .profile loaded successfully!"
+    marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
+    state: present
+    create: true
+    backup: false
+    mode: "0755"
+  loop:
+    - ".profile"
+    - ".xprofile"
+    - ".xsessionrc"
+  when: user_user.home != ""
 
 - name: General | Account Management | Users | Files | .bashrc
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.bashrc"
     block: |
       {{ rc_common }}
+
+      # Export all functions! #
+      eval "$(declare -F | grep -v _ | sed 's/-f /-fx /')"
+
       [[ $(whoami) != "root" ]] &&
         echo "`date` - Ansible .bashrc loaded successfully!"
     marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: false
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
   when: user_root.home != "" and user_user.home != ""
 
 - name: General | Account Management | Users | Files | .zshrc
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.zshrc"
     block: |
       {{ rc_common }}
@@ -1173,59 +1376,39 @@
         echo "`date` - Ansible .zshrc loaded successfully!"
     marker: '# {mark} MANAGED BY ANSIBLE | Aliases'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: false
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
-  when: user_root.home != "" and user_user.home != ""
-
-- name: General | Account Management | Users | Files | .vimrc
-  blockinfile:
-    path: "{{ item }}/.vimrc"
-    block: |
-      " Turn off syntax, flashy lights, etc. Make VIM into a basic editor.
-      syntax off
-      set nohlsearch
-      set noautoindent noautowrite noshowmatch wrapmargin=0 report=1 ts=3
-      set ignorecase
-
-      " Turn off auto-commenting.
-      autocmd Filetype * set fo-=c fo-=r fo-=o
-
-      " qq shortcut for immediately exiting all files without saving.
-      nnoremap qq :qa!<cr>
-    marker: '" {mark} MANAGED BY ANSIBLE | vimrc'
-    state: present
-    create: yes
-    backup: yes
-  loop:
-    - "{{ user_root.home }}"
-    - "{{ user_user.home }}"
-  ignore_errors: yes
   when: user_root.home != "" and user_user.home != ""
 
 - name: General | Account Management | Users | Files | Ownership
-  file:
+  ansible.builtin.file:
     path: "{{ user_user.home }}/{{ item }}"
     owner: "{{ user }}"
     mode: '0755'
   loop:
     - .bashrc
     - .zshrc
-    - .vimrc
+    - .profile
+    - .xprofile
+    - .xsessionrc
 
 
 - name: General | Account Management | Users | Files | Helper Functions (Reset)
-  shell: "rm -v {{ global_bin }}/*.function"
+  ansible.builtin.shell: "rm -v {{ global_bin }}/*.function"
+  ignore_errors: true
+  register: shell_check
+  changed_when: shell_check.rc == 0
 
 - name: General | Account Management | Users | Files | Helper Functions
-  copy:
+  ansible.builtin.copy:
     src: "{{ item }}"
     dest: "{{ global_bin }}"
     owner: root
     group: "{{ root_group }}"
-    mode: 0755
+    mode: "0755"
   with_fileglob:
     - "functions/*.function"

tasks/general/cron/ansible.yml

@@ -7,20 +7,50 @@
 # $RANDOM /  50 can be up to about  650 seconds, or ~11 minutes.
 # $RANDOM / 100 can be up to about  320 seconds, or  ~5 minutes.
 # This prevents multiple systems from hitting it at the exact same time.
+
+- name: General | Cron | Ansible | Facts 01
+  ansible.builtin.set_fact:
+    #ansible_cron_log: "~/{{ ansible_hostname }}.ansible-pull.`date +'%Y%m%d-%H%M%S'`.log"
+    ansible_cron_log: "~/{{ ansible_hostname }}.ansible-pull.log"
+
+- name: General | Cron | Ansible | Facts 02
+  ansible.builtin.set_fact:
+    ansible_cron_log_old: "{{ ansible_cron_log }}.old"
+
+
+- name: General | Cron | Ansible | Log | Delete Old
+  ansible.builtin.file:
+    path: "{{ ansible_cron_log_old }}"
+    state: absent
+
+- name: General | Cron | Ansible | Log | Check
+  ansible.builtin.stat:
+    path: "{{ ansible_cron_log }}"
+  register: ansible_cron_log_check
+
+- name: General | Cron | Ansible | Log | Rename [if >1MB]
+  ansible.builtin.copy:
+    src: "{{ ansible_cron_log }}"
+    dest: "{{ ansible_cron_log_old }}"
+    mode: "0755"
+  when: ansible_cron_log_check.stat.exists
+    and ansible_cron_log_check.stat.size > 1000000
+
+
 - name: General | Cron | Ansible | Create Subscriber Job
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: "Ansible Sync"
     minute: "*/30"
-    job: "bash -c 'sleep $(( $RANDOM / 20 )); sudo {{ ansible_pull_exec.stdout }} -v -o -U {{ git_repo_http }} --checkout {{ branch }}'"
+    job: "bash -c 'sleep $(( $RANDOM / 20 )); sudo {{ ansible_pull_exec.stdout }} -v -o -U {{ git_repo_http }} --checkout {{ branch }} >>{{ ansible_cron_log }} 2>&1'"
     state: present
     disabled: "{{ 'yes' if no_telem else 'no' }}"
 
 - name: General | Cron | Ansible | Create Forced Weekly Subscriber Job
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: "Ansible Weekly Forced Sync"
-    special_time: daily
-    job: "bash -c 'sleep $(( $RANDOM /  1 )); sudo {{ ansible_pull_exec.stdout }} -v    -U {{ git_repo_http }} --checkout {{ branch }}'"
+    special_time: weekly
+    job: "bash -c 'sleep $(( $RANDOM /  1 )); sudo {{ ansible_pull_exec.stdout }} -v    -U {{ git_repo_http }} --checkout {{ branch }} >>{{ ansible_cron_log }} 2>&1'"
     state: present
     disabled: "{{ 'yes' if no_telem else 'no' }}"

tasks/general/scripts/install.yml

@@ -16,7 +16,7 @@
     mode: '0755'
 
 - name: General | Scripts | Install | Remove Old Scripts
-  shell: |
+  ansible.builtin.shell: |
     if [[ -e {{ global_bin }}/{{ item }} ]]; then
       rm -v {{ global_bin }}/{{ item }}
     fi

tasks/general/scripts/root.yml

@@ -2,7 +2,7 @@
 # Create file to easily push git changes and call SCM.
 
 - name: General | Scripts | Root | scm.sh
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ user_root.home }}/bin/scm.sh"
     block: |
       # 20210211 - Make life easier!
@@ -11,16 +11,16 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | Root | scm.sh Permissions
-  file:
+  ansible.builtin.file:
     path: "{{ user_root.home }}/bin/scm.sh"
     mode: '0755'
 
 
 - name: General | Scripts | Root | scm-dev.sh
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ user_root.home }}/bin/scm-dev.sh"
     block: |
       # 20210713 - Make life easier for development!
@@ -41,9 +41,9 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | Root | scm-dev.sh Permissions
-  file:
+  ansible.builtin.file:
     path: "{{ user_root.home }}/bin/scm-dev.sh"
     mode: '0755'

tasks/general/scripts/user.yml

@@ -2,7 +2,7 @@
 # Create file to easily push git changes and call SCM.
 
 - name: General | Scripts | User | scm.sh
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ user_user.home }}/bin/scm.sh"
     block: |
       # 20210211 - Make life easier!
@@ -11,16 +11,16 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | User | scm.sh Permissions
-  file:
+  ansible.builtin.file:
     path: "{{ user_user.home }}/bin/scm.sh"
     mode: '0755'
 
 
 - name: General | Scripts | User | scm-dev.sh
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ user_user.home }}/bin/scm-dev.sh"
     block: |
       # 20210713 - Make life easier for development!
@@ -41,9 +41,9 @@
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
 
 - name: General | Scripts | User | scm-dev.sh Permissions
-  file:
+  ansible.builtin.file:
     path: "{{ user_user.home }}/bin/scm-dev.sh"
     mode: '0755'

tasks/general/settings/keyboard.yml

@@ -0,0 +1,16 @@
+---
+# 20260716 - Hyperling
+# Ensure the correct International AltGr keyboard setting is always chosen.
+
+- name: General | Settings | Keyboard | Default Config
+  ansible.builtin.lineinfile:
+    path: "/etc/default/keyboard"
+    regexp: '{{ item.key }}'
+    line: '{{ item.value }}'
+    state: present
+    create: true
+    backup: true
+  loop:
+    #- { "key": '^[\#]?XKBMODEL',   "value": 'XKBMODEL="pc105"'}
+    - { "key": '^[\#]?XKBLAYOUT',  "value": 'XKBLAYOUT="us"'}
+    - { "key": '^[\#]?XKBVARIANT', "value": 'XKBVARIANT="altgr-intl"'}

tasks/general/software/aur.yml

@@ -0,0 +1,54 @@
+---
+# 20260731 - Hyperling
+# Install the AUR on pacman-related distros.
+
+- name: General | Software | AUR | Facts 01
+  ansible.builtin.set_fact:
+    aur_user: aurbuilder
+    aur_build_dir: "{{ global_src }}"
+    aur_helper: yay
+    aur_helper_url: https://aur.archlinux.org/yay-bin.git
+
+- name: General | Software | AUR | Facts 02
+  ansible.builtin.set_fact:
+    aur_helper_dir: "{{ aur_build_dir }}/{{ aur_helper }}"
+    aur_sudoers: "/etc/sudoers.d/sudoers_{{ aur_user }}"
+
+- name: General | Software | AUR | User
+  ansible.builtin.user:
+    name: "{{ aur_user }}"
+    groups: wheel
+    create_home: true
+
+- name: General | Software | AUR | Sudoers
+  ansible.builtin.lineinfile:
+    path: "{{ aur_sudoers }}"
+    line: "{{ aur_user }} ALL=(ALL) NOPASSWD: /usr/bin/pacman"
+    create: true
+    mode: '0440'
+    validate: 'visudo -cf %s'
+
+- name: General | Software | AUR | Check
+  command: "which {{ aur_helper }}"
+  register: yay_check
+  changed_when: false
+  failed_when: false
+
+- name: General | Software | AUR | Install
+  block:
+
+    - name: General | Software | AUR | Install | Clone Repo
+      ansible.builtin.git:
+        repo: "{{ aur_helper_url }}"
+        dest: "{{ aur_helper_dir }}"
+
+    - name: General | Software | AUR | Install | Change Permissions
+      ansible.builtin.shell: "chown -Rc {{ aur_user }}:wheel {{ aur_helper_dir }}"
+
+    - name: General | Software | AUR | Install | Build & Integrate
+      ansible.builtin.shell: "cd {{ aur_helper_dir }} && makepkg -si --noconfirm"
+      become: true
+      become_user: "{{ aur_user }}"
+      changed_when: true
+
+  when: yay_check.rc != 0

tasks/general/software/env-shared.yml

@@ -0,0 +1,52 @@
+---
+# 20261002 - Hyperling
+# Move internet requiring code out of users.yml.
+
+# Shared Environment Setup #
+
+- name: General | Account Management | Users | env-shared | Download / Update
+  ansible.builtin.git:
+    repo: https://git.hyperling.com/me/env-shared
+    version: "{{ branch }}"
+    dest: "{{ shared_rc_install_dir }}"
+    clone: true
+    force: true
+    update: true
+  #ignore_errors: true
+
+- name: General | Account Management | Users | env-shared | Install | .rc_shared
+  copy:
+    src: "{{ shared_rc_install_dir }}/rc_shared.sh"
+    dest: "{{ item }}/.rc_shared"
+    owner: root
+    group: "{{ root_group }}"
+    mode: "0755"
+  loop:
+    - "{{ user_root.home }}"
+    - "{{ user_user.home }}"
+  #ignore_errors: true
+  when: user_root.home != "" and user_user.home != ""
+
+- name: General | Account Management | Users | env-shared | Install | .vimrc
+  copy:
+    src: "{{ shared_rc_install_dir }}/vimrc.vim"
+    dest: "{{ item }}/.vimrc"
+    owner: root
+    group: "{{ root_group }}"
+    mode: "0755"
+  loop:
+    - "{{ user_root.home }}"
+    - "{{ user_user.home }}"
+  #ignore_errors: true
+  when: user_root.home != "" and user_user.home != ""
+
+- name: General | Account Management | Users | env-shared | Permissions
+  ansible.builtin.file:
+    path: "{{ user_user.home }}/{{ item }}"
+    owner: "{{ user }}"
+    group: "{{ user }}"
+    mode: "0755"
+  loop:
+    - .rc_shared
+    - .vimrc
+  #ignore_errors: true

tasks/general/software/metasploit.yml

@@ -2,26 +2,52 @@
 # Install Metasploit Framework
 
 - name: General | Software | Metasploit | Facts
-  set_fact:
+  ansible.builtin.set_fact:
     metasploit_installer: msfinstall
   when: ansible_system in ("Linux", "Darwin")
+    and pentesting
+
+- name: General | Software | Metasploit | Check Install Status
+  ansible.builtin.stat:
+    path: /usr/bin/msfconsole
+  register: metasploit_status
 
 - name: General | Software | Metasploit | Refresh Apt Files
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "mkdir -p /tmp/apt/"
     - "mv -fv /usr/share/keyrings/metasploit-framework.gpg /tmp/apt/metasploit-framework.gpg.old"
     - "mv -fv /etc/apt/sources.list.d/metasploit-framework.list /tmp/apt/metasploit-framework.list.old"
     - "mv -fv /etc/apt/preferences.d/pin-metasploit.pref /tmp/apt/pin-metasploit.pref.old"
-  when: ansible_system in ("Linux")
+  when: ansible_system in ("Linux") and ansible_pkg_mgr == "apt"
+    and not metasploit_status.stat.exists
+    and pentesting
   ignore_errors: true
 
 - name: General | Software | Metasploit | Install
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "curl https://raw.githubusercontent.com/rapid7/metasploit-omnibus/master/config/templates/metasploit-framework-wrappers/msfupdate.erb > {{ metasploit_installer }}"
     - "chmod 755 {{ metasploit_installer }}"
     - "mkdir -p {{ global_bin }}"
-    - "mv -fv ./msfinstall {{ global_bin }}/{{ metasploit_installer }}"
+    - "mv -fv ./{{ metasploit_installer }} {{ global_bin }}/{{ metasploit_installer }}"
     - yes y | "{{ global_bin }}/{{ metasploit_installer }}"
   when: ansible_system in ("Linux", "Darwin")
+    and not metasploit_status.stat.exists
+    and pentesting
+
+- name: General | Software | Metasploit | Remove (Darwin)
+  ansible.builtin.shell: "{{ item }}"
+  loop:
+    - "/opt/metasploit-framework/bin/msfremove"
+  when: ansible_system in ("Darwin")
+    and not metasploit_status.stat.exists
+    and pentesting == false
+
+- name: General | Software | Metasploit | Remove
+  ansible.builtin.package:
+    name: "metasploit-framework"
+    state: absent
+  when: ansible_system in ("Linux")
+    and metasploit_status.stat.exists
+    and pentesting == false

tasks/general/software/nix.yml

@@ -13,20 +13,21 @@
 ###
 
 - name: Nix Variables
-  set_fact:
+  ansible.builtin.set_fact:
     nix_exe: ~/.deleteme.nix.sh
 
 - name: Install Nix
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "curl -L https://nixos.org/nix/install > {{ nix_exe }}"
     - "chmod 755 {{ nix_exe }}"
     - "{{ nix_exe }} --daemon --yes"
     - "rm -v {{ nix_exe }}"
+  become: true
   become_user: "{{ user }}"
 
 - name: Install Nix Software
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "nix-env -iA nixpkgs.lbry" # Installs, but doesnt launch?
 #$ lbry

tasks/general/software/nixos.yml

@@ -3,20 +3,20 @@
 # This is also done in setup.sh if ansible is not found.
 
 - name: General | Software | NixOS | Facts
-  set_fact:
+  ansible.builtin.set_fact:
     nixos_working_dir: ~/nixos-config-deleteme
     nixos_working_exe: activate.sh
 
 - name: General | Software | NixOS | Facts [Swap]
-  set_fact:
+  ansible.builtin.set_fact:
     nixos_swap: "swapDevices = [ { device = \"{{ swap_file }}\";} ];"
   when: swap_block != false
 
 - name: General | Software | NixOS | Update Config Project
-  shell: "files/scripts/nixos.sh -b {{ branch }}"
+  ansible.builtin.shell: "files/scripts/nixos.sh -b {{ branch }}"
 
 - name: General | Software | NixOS | Create Ansible Nix Config
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: /etc/nixos/ansible.nix
     block: |
       # This file was created by https://git.hyperling.com/me/env-ansible
@@ -29,14 +29,14 @@
         {{ nixos_swap }}
       }
     state: present
-    backup: yes
-    create: yes
+    backup: true
+    create: true
 
 
 #  Maybe do home manager here? Or should it be under Workstation? Or maybe
 #   this is the spot where I start creating workstation.nix, server.nix, etc.
 #- name: General | Software | NixOS | Home Manager? *.nix file management?
-#  shell:
+#  ansible.builtin.shell:
 #  loop:
 #    - ???
 #    - ???

tasks/general/software/packages.yml

@@ -5,108 +5,117 @@
 # They have zypper higher in the path, but it's really apt renamed.
 # Probably for "security", but package module does not use the ansible_pkg_mgr variable
 #   so resetting the value to apt doesn't work. Just going to move it.
-  shell: "mv `which zypper` `which zypper`.zz.`date +%Y%m%d`"
+  ansible.builtin.shell: "mv `which zypper` `which zypper`.zz.`date +%Y%m%d`"
   register: parrotos_zypper_removed
-  ignore_errors: yes
+  ignore_errors: true
   when: ansible_distribution == "Parrot OS"
 
 - name: General | Software | Packages | Fix Parrot OS (zypper), Exit Incoming
-  debug:
+  ansible.builtin.debug:
     msg: "A silly zypper file was renamed successfully. Please try running Ansible again."
   when: ansible_distribution == "Parrot OS" and parrotos_zypper_removed is defined and not parrotos_zypper_removed.failed
 
 - name: General | Software | Packages | Fix Parrot OS (zypper), Exiting
-  shell: exit 1
+  ansible.builtin.shell: exit 1
   when: ansible_distribution == "Parrot OS" and parrotos_zypper_removed is defined and not parrotos_zypper_removed.failed
 
 # More Parrot OS junk. They have a command called update in /usr/bin. Doesn't
 # have sudo or anything in it. Hide it in preference for .bashrc update function.
 - name: General | Software | Packages | Fix Parrot OS 2 (update)
-  shell: "mv `which update` `which update`.zz.`date +%Y%m%d`"
-  ignore_errors: yes
+  ansible.builtin.shell: "mv `which update` `which update`.zz.`date +%Y%m%d`"
+  ignore_errors: true
   when: ansible_distribution == "Parrot OS"
 
 
 - name: General | Software | Packages | Cache Refresh (Apt and Pacman)
-  package:
-    update_cache: yes
+  ansible.builtin.package:
+    update_cache: true
     name: htop
   when: ansible_pkg_mgr in ["apt", "pacman"]
 
 - name: General | Software | Packages | Cache Refresh (FreeBSD)
-  shell: pkg update
+  ansible.builtin.shell: pkg update
   when: ansible_system == "FreeBSD"
 
 - name: General | Software | Packages | Install Software
-  package:
+  ansible.builtin.package:
     name:
-    - bash
-    - sudo
-    - nmap
-    - "{{ neofetch }}"
-    - "{{ sshfs }}"
-    - "{{ locate }}"
-    - zsh
-    - "{{ opensshd }}"
-    - "{{ tar }}"
-    - curl
-    - at
-    - gcc
-    - vim
-    - "{{ cron }}"
-    - "{{ encfs }}"
-    - rsync
-    - "{{ iftop }}"
-    - "{{ nethogs }}"
-    - "{{ ntp_server }}"
-    - "{{ dig }}"
+      - bash
+      - sudo
+      - nmap
+      - "{{ neofetch }}"
+      - "{{ sshfs }}"
+      - "{{ locate }}"
+      - zsh
+      - "{{ opensshd }}"
+      - "{{ tar }}"
+      - curl
+      - at
+      - gcc
+      - vim
+      - "{{ cron }}"
+      - "{{ encfs }}"
+      - rsync
+      - "{{ iftop }}"
+      - "{{ nethogs }}"
+      - "{{ ntp_server }}"
+      - "{{ dig }}"
+      - "{{ tmux }}"
+      - "{{ base_devel }}"
+      - "{{ sendmail }}"
+      - "{{ sendmail_mta }}"
+      - "{{ ca_certificates }}"
+      - "{{ alsa }}"
+      - "{{ stress }}"
+      - "{{ jq }}"
     state: present
 
 - name: General | Software | Packages | Install Software (DEV)
-  package:
+  ansible.builtin.package:
     name:
-    - "{{ microcode_amd }}"
-    - "{{ microcode_intel }}"
+      - "{{ microcode_amd }}"
+      - "{{ microcode_intel }}"
     state: present
   when: branch == "dev"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Add Generic Kernel + Tools (Ubuntu)
-  package:
+  ansible.builtin.package:
     name:
-    - linux-image-generic
-    - linux-headers-generic
-    - linux-tools-generic
-    - linux-tools-common
+      - linux-image-generic
+      - linux-headers-generic
+      - linux-tools-generic
+      - linux-tools-common
     state: present
   when: ansible_distribution == "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Add Generic Kernel + Headers (Debian)
-  package:
+  ansible.builtin.package:
     name:
-    - linux-image-amd64
-    - linux-headers-amd64
+      - linux-image-amd64
+      - linux-headers-amd64
     state: present
   when: ansible_distribution == "Debian"
-  ignore_errors: yes
+  ignore_errors: true
 
-- name: General | Software | Services | Install killall (Looking at you, Debian)
-  package:
+- name: General | Software | Packages | Install killall (Looking at you, Debian)
+  ansible.builtin.package:
     name: psmisc
     state: present
   when: ansible_distribution == "Debian"
 
-- name: General | Software | Services | Install "Bloat" (Looking at you, Arch Base)
-  package:
+- name: General | Software | Packages | Install "Bloat" (Looking at you, Arch Base)
+  ansible.builtin.package:
     name:
-    - which
-    - "{{ cron }}"
+      - which
+      - "{{ cron }}"
+      - pacman-contrib
     state: present
-  when: ansible_distribution == "Archlinux"
+  when: ansible_pkg_mgr == "pacman"
 
-- name: General | Software | Services | Install Fix (Looking at you, openSUSE)
-  package:
+- name: General | Software | Packages | Install Fix (Looking at you, openSUSE)
+  ansible.builtin.package:
     name:
       # openSUSE Tumbleweed comes without gnome-control-center being able to open
       #  properly. Hopefully just a one-time accident but I wanted bleeding edge so I
@@ -118,43 +127,43 @@
   when: ansible_pkg_mgr in ("zypper")
 
 - name: General | Software | Packages | Update Software (Disabled)
-  package:
+  ansible.builtin.package:
     name:
-    - ansible
-    - git
+      - ansible
+      - git
     state: latest
   when: 1 == 0
 
 - name: General | Software | Packages | Remove Software
-  package:
+  ansible.builtin.package:
     name:
-    - cowsay # Sorry ;)
-    - chromium
-    - chromium-browser
+      - cowsay # Sorry ;)
+      - chromium
+      - chromium-browser
     state: absent
 
 # Ubuntu still uses snap for critical components like GNOME, must keep.
-- name: General | Software | Services | Disable Snap Daemon
-  service:
+- name: General | Software | Packages | Disable Snap Daemon
+  ansible.builtin.service:
     name: snapd
     pattern: snapd
     state: stopped
-    enabled: no
+    enabled: false
   when: ansible_distribution != "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Remove Snap (Besides Ubuntu)
-  package:
+  ansible.builtin.package:
     name:
-    - snapd
+      - snapd
     state: absent
   when: ansible_distribution != "Ubuntu"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Software | Packages | Other Debian Packages
-  package:
+  ansible.builtin.package:
     name:
-    - usbutils
+      - usbutils
     state: present
   when: ansible_distribution in ("Debian")
-  ignore_errors: yes
+  ignore_errors: true

tasks/general/software/runit.yml

@@ -0,0 +1,23 @@
+---
+# 20261006 Hyperling
+
+# Allow ansible.builtin.service to be used on Artix similar to Devuan.
+- name: General | Software | runit | Fix Artix
+  block:
+
+    - name: General | Software | runit | Fix Artix | Script Dir
+      ansible.builtin.file:
+        src: /etc/runit/sv
+        dest: /etc/sv
+        state: link
+        force: true
+
+    - name: General | Software | runit | Fix Artix | Service Dir
+      ansible.builtin.file:
+        src: /etc/runit/runsvdir/default
+        dest: /var/service
+        state: link
+        force: true
+
+  when: ansible_service_mgr == "runit"
+    and ansible_pkg_mgr == "pacman"

tasks/general/software/sendmail.yml

@@ -3,46 +3,46 @@
 # Preferably only on servers that don't already have postfix?
 
 - name: Server | Sendmail | Variables
-  set_fact:
+  ansible.builtin.set_fact:
     sendmail: sendmail
     sendmail_queue: sendmail_msp_queue
 
 - name: Server | Sendmail | Check
-  shell: which postfix
+  ansible.builtin.shell: which postfix
   register: postfix
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | Sendmail | Install
-  package:
-    name: 
+  ansible.builtin.package:
+    name:
       - "{{ sendmail }}"
     state: present
   when: postfix.failed
 
 - name: Server | Sendmail | Configure
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: /etc/rc.conf
     block: |
       sendmail_enable="YES"
       sendmail_msp_queue_enable="YES"
     marker: "# {mark} MANAGED BY ANSIBLE - sendmail"
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   when: postfix.failed and ansible_system == "FreeBSD"
 
 - name: Server | Sendmail | Enable + Start | Main
-  service:
+  ansible.builtin.service:
     name: "{{ sendmail }}"
     pattern: "{{ sendmail }}"
     state: started
-    enabled: yes
+    enabled: true
   when: postfix.failed
 
 - name: Server | Sendmail | Enable + Start | Queue
-  service:
+  ansible.builtin.service:
     name: "{{ sendmail_queue }}"
     pattern: "{{ sendmail_queue }}"
     state: started
-    enabled: yes
+    enabled: true
   when: postfix.failed and ansible_system == "FreeBSD"

tasks/general/software/services.yml

@@ -4,47 +4,37 @@
 ## Cron ##
 
 - name: General | Software | Services | CROND | Enable
-  service:
+  ansible.builtin.service:
     name: "{{ crond }}"
     pattern: "{{ crond_pattern }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
+    and ansible_service_mgr != "runit"
   register: cron_status
   until: cron_status.state == "started"
   retries: 3
   delay: 3
 
-
-## CUPS ##
-
-- name: General | Software | Services | CUPS | Disable
-  service:
-    name: "{{ cups }}"
-    pattern: "{{ cups_pattern }}"
-    state: stopped
-    enabled: no
-  ignore_errors: yes
-
-- name: General | Software | Services | CUPS-Browse | Disable
-  service:
-    name: "{{ cups_browse }}"
-    pattern: "{{ cups_browse_pattern }}"
-    state: stopped
-    enabled: no
-  ignore_errors: yes
-
+- name: General | Software | Services | CROND | Enable (runit)
+  ansible.builtin.service:
+    name: "{{ crond }}"
+    state: started
+    enabled: true
+  when: ansible_virtualization_type != 'docker'
+    and ansible_service_mgr == "runit"
+  ignore_errors: true # Service module seems experimental for this init system.
 
 ## SSHD ##
 
 - name: General | Software | Services | SSHD | Configure
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ sshd_config }}"
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?AllowUsers',           "value": 'AllowUsers {{ user }}'}
     - { "key": '^[\#]?PermitRootLogin',      "value": 'PermitRootLogin no'}
@@ -62,13 +52,13 @@
     - { "key": '^[\#]?PermitEmptyPasswords', "value": 'PermitEmptyPasswords no'}
 
 - name: General | Software | Services | SSHD | Configure (PVE)
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ sshd_config }}"
     regexp: '{{ item.key }}'
     line: '{{ item.value }} # MANAGED BY ANSIBLE'
     state: present
-    create: yes
-    backup: yes
+    create: true
+    backup: true
   loop:
     - { "key": '^[\#]?AllowUsers',      "value": 'AllowUsers root {{ user }}'}
     - { "key": '^[\#]?PermitRootLogin', "value": 'PermitRootLogin yes'}
@@ -76,46 +66,48 @@
   when: "'pve' in ansible_kernel"
 
 - name: General | Software | Services | SSHD | Enable
-  service:
+  ansible.builtin.service:
     name: "{{ sshd }}"
     pattern: "{{ sshd_pattern }}"
     state: reloaded
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
+    and ansible_service_mgr != "runit"
   register: sshd_status
   until: sshd_status.state == "started"
   retries: 3
   delay: 3
 
-
 ## JournalCTL ##
 
 - name: General | Software | Services | JournalCTL | Reduce Log Size
-  shell: journalctl --vacuum-size=100M
+  ansible.builtin.shell: journalctl --vacuum-size=100M
   when: ansible_system == "Linux"
-  ignore_errors: yes
-
+    and ansible_service_mgr == "systemd"
+  ignore_errors: true
 
 ## Bluetooth ##
 # Do people seriously depend on Bluetooth? Plug your devices in, silly!
+# Hehe, I use it now for a few rare things so disabling this for now.
 
-- name: General | Software | Services | Bluetooth | Disable
-  service:
-    name: "{{ bluetooth }}"
-    pattern: "{{ bluetooth_pattern }}"
-    state: stopped
-    enabled: no
-  ignore_errors: yes
+#- name: General | Software | Services | Bluetooth | Disable
+#  ansible.builtin.service:
+#    name: "{{ bluetooth }}"
+#    pattern: "{{ bluetooth_pattern }}"
+#    state: stopped
+#    enabled: false
+#  ignore_errors: true
 
 ## NTP ##
 
 - name: General | Software | Services | NTP | Enable
-  service:
+  ansible.builtin.service:
     name: "{{ ntp_server }}"
     pattern: "{{ ntp_server }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_virtualization_type != 'docker'
+    and ansible_service_mgr != "runit"
   register: ntp_status
   until: ntp_status.state == "started"
   retries: 3
@@ -127,3 +119,30 @@
 # Add a field to general.yml config file which gets applied via timedatectl and /etc/localtime.
 # Example of what to do to file:
 #    /etc/localtime -> ../usr/share/zoneinfo/America/Phoenix
+
+## Disable ##
+
+- name: General | Software | Services | Disable
+  ansible.builtin.service:
+    name: "{{ item.name }}"
+    pattern: "{{ item.pattern }}"
+    state: stopped
+    enabled: false
+  ignore_errors: true
+  loop:
+    - {name: "{{ cups }}"       , pattern: "{{ cups_pattern }}"}
+    - {name: "{{ cups_browse }}", pattern: "{{ cups_browse_pattern }}"}
+  when: ansible_service_mgr != "runit"
+
+- name: General | Software | Services | Disable (runit)
+  ansible.builtin.shell: |
+    if [[ -e {{ runit_service_dir }}/{{ item.name }} ]]; then
+      rm -v {{ runit_service_dir }}/{{ item.name }}
+    fi
+  ignore_errors: true
+  loop:
+    - {name: "{{ cups }}"               }
+    - {name: "{{ cups_pattern }}"       }
+    - {name: "{{ cups_browse }}"        }
+    - {name: "{{ cups_browse_pattern }}"}
+  when: ansible_service_mgr == "runit"

tasks/general/software/swap.yml

@@ -7,7 +7,7 @@
   block:
 
   - name: General | Software | Swap | Check For Swapfile
-    stat:
+    ansible.builtin.stat:
       path: "{{ swap_file }}"
       get_attributes: false
       get_checksum: false
@@ -18,7 +18,7 @@
     block:
 
     - name: General | Software | Swap | Create Swapfile
-      shell: "{{ item }}"
+      ansible.builtin.shell: "{{ item }}"
       loop:
         - dd if=/dev/zero of={{ swap_file }} bs={{ swap_block }}
             count={{ swap_count }} status=progress
@@ -31,12 +31,12 @@
 
   # NixOS's swap setup is handled in nixos.yml when ansible.nix is created.
   - name: General | Software | Swap | Add to FSTAB
-    lineinfile:
+    ansible.builtin.lineinfile:
       path: /etc/fstab
       regexp: '^[\#]?{{ swap_file }}'
       line: '{{ swap_file }} none swap sw 0 0'
       state: present
-      backup: yes
+      backup: true
     when: ansible_distribution != "NixOS"
 
   # Only run through this file if the ini has been changed from false.

tasks/general/software/telegraf.yml

@@ -5,7 +5,7 @@
 # Variables #
 
 - name: General | Telegraf | Variables 1/4
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_tar: telegraf-1.20.3_linux_amd64.tar.gz
     telegraf_path: /usr/local/bin
     telegraf_config_path: /usr/local/etc
@@ -13,25 +13,25 @@
     telegraf_log: "{{ user_ansible.home }}/telegraf.log"
 
 - name: General | Telegraf | Variables 2/4
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_exec: "{{ telegraf_path }}/telegraf"
     telegraf_config: "{{ telegraf_config_path }}/telegraf.conf"
 
 - name: General | Telegraf | Variables 3/4
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_cmd: "{{ telegraf_exec }} --config {{ telegraf_config }} >> {{ telegraf_log }} 2>&1"
 
 - name: General | Telegraf | Variables 4/4
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_watcher: "killall telegraf; {{ telegraf_cmd }}"
 
 - name: General | Telegraf | Variables | Linux
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_input_temp: "[[inputs.temp]]"
   when: ansible_system == "Linux"
 
 - name: General | Telegraf | Variables | FreeBSD
-  set_fact:
+  ansible.builtin.set_fact:
     telegraf_input_temp: ""
   when: ansible_system == "FreeBSD"
 
@@ -40,14 +40,14 @@
 #### Dependencies #
 ###
 ###- name: General | Telegraf | Pre-Reqs
-###  package:
+###  ansible.builtin.package:
 ###    name: wget
 ###  when: ansible_system == "Linux"
 ###
 #### Install #
 ###
 ###- name: General | Telegraf | Linux | Install
-###  shell: "{{ item }}"
+###  ansible.builtin.shell: "{{ item }}"
 ###  args:
 ###    chdir: "{{ ansible_env.HOME }}/Downloads/"
 ###  loop:
@@ -61,22 +61,22 @@
 ###  when: ansible_system == "Linux"
 ###
 ###- name: General | Telegraf | FreeBSD | Install 1/2
-###  shell: /usr/sbin/pwd_mkdb -p /etc/master.passwd
+###  ansible.builtin.shell: /usr/sbin/pwd_mkdb -p /etc/master.passwd
 ###  when: ansible_system == "FreeBSD"
 ###
 ###- name: General | Telegraf | FreeBSD | Install 2/2
-###  package:
+###  ansible.builtin.package:
 ###    name: telegraf
 ###  when: ansible_system == "FreeBSD"
 ###
 #### Configuration #
 ###
 ###- name: General | Telegraf | Config 1/2
-###  shell: mv {{ telegraf_config }} ~/TRASH/
-###  ignore_errors: yes
+###  ansible.builtin.shell: mv {{ telegraf_config }} ~/TRASH/
+###  ignore_errors: true
 ###
 ###- name: General | Telegraf | Config 2/2
-###  blockinfile:
+###  ansible.builtin.blockinfile:
 ###    path: "{{ telegraf_config }}"
 ###    block: |
 ###      [global_tags]
@@ -158,19 +158,19 @@
 ###
 ###    marker: '# {mark} MANAGED BY ANSIBLE - telegraf.yml'
 ###    state: present
-###    create: yes
+###    create: true
 
 # Run #
 
 - name: General | Telegraf | Schedule
-  cron:
+  ansible.builtin.cron:
     user: "{{ telegraf_user }}"
     name: "{{ item.name }}"
     job: "{{ item.command }}"
     special_time: "{{ item.freq }}"
     state: present
     #disabled: "{{ 'yes' if no_telem else 'no' }}"
-    disabled: yes # 2024-01-25, Downsizing again and will not have Graphana.
+    disabled: true # 2024-01-25, Downsizing again and will not have Graphana.
   loop:
     - { "name": "Telegraf Reboot Job"    , "freq": "reboot", "command": "{{ telegraf_cmd }}"}
     - { "name": "Telegraf Keep-Alive Job", "freq": "hourly", "command": "{{ telegraf_watcher }}"}

tasks/general/tests/internet_check.yml

@@ -0,0 +1,32 @@
+---
+# 20261002 - Hyperling
+# Check whether we're connected to the internet and skip certain playbooks if not.
+
+- name: General | Tests | Internet | Facts 01
+  ansible.builtin.set_fact:
+    internet: true
+    internet_time: 10
+
+- name: General | Tests | Internet | Check
+  ansible.builtin.wait_for:
+    host: archlinux.org
+    port: 443
+    state: started
+    timeout: "{{ internet_time }}"
+  register: internet_check
+  ignore_errors: true
+
+- name: General | Tests | Internet | Facts 02
+  ansible.builtin.set_fact:
+    internet: "{{ internet_check is success }}"
+
+- name: General | Tests | Internet | Message
+  ansible.builtin.debug:
+    msg: "WARNING: Not connected to the Internet, only running for offline playbooks."
+  when: not internet
+
+- name: General | Tests | Internet | Sleep
+  ansible.builtin.command: "sleep {{ internet_time }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: not internet

tasks/general/tests/lock_check.yml

@@ -0,0 +1,16 @@
+---
+# 20260929 - Hyperling
+# Ensure an existing run is not active, otherwise bail.
+
+- name: General | Tests | Existing Run | Facts
+  ansible.builtin.set_fact:
+    lock_file: "/tmp/ansible-playbook.lock"
+
+- name: General | Tests | Existing Run | Check
+  ansible.builtin.stat:
+    path: "{{ lock_file }}"
+  register: lock_exists
+
+- name: General | Tests | Existing Run | Exit
+  ansible.builtin.meta: end_play
+  when: lock_exists.stat.exists

tasks/general/tests/lock_create.yml

@@ -0,0 +1,22 @@
+---
+# 20260929 - Hyperling
+# Ensure an existing run is not active, otherwise bail.
+
+- name: General | Tests | Existing Run | Lock | Create
+  ansible.builtin.shell: "date +'%Y-%m-%d %H:%M:%S' >> {{lock_file }}"
+
+
+- name: General | Tests | Existing Run | Lock | Create
+  ansible.builtin.file:
+    name: "{{ lock_file }}"
+    mode: '0777'
+
+- name: General | Tests | Existing Run | Lock | Create | Check
+  ansible.builtin.stat:
+    path: "{{ lock_file }}"
+  register: lock_exists
+
+- name: General | Tests | Existing Run | Lock | Create | Fail
+  fail:
+    msg: "ERROR: Lock file does not exist."
+  when: not lock_exists.stat.exists

tasks/general/tests/lock_remove.yml

@@ -0,0 +1,18 @@
+---
+# 20260929 - Hyperling
+# Ensure an existing run is not active, otherwise bail.
+
+- name: General | Tests | Existing Run | Lock | Remove
+  ansible.builtin.file:
+    name: "{{ lock_file }}"
+    state: absent
+
+- name: General | Tests | Existing Run | Lock | Remove | Check
+  ansible.builtin.stat:
+    path: "{{ lock_file }}"
+  register: lock_exists
+
+- name: General | Tests | Existing Run | Lock | Remove | Fail
+  fail:
+    msg: "ERROR: Lock file still exists!"
+  when: lock_exists.stat.exists

tasks/general/tests/lynis.yml

@@ -2,45 +2,45 @@
 # Lynis hardness check.
 
 - name: General | Tests | Lynis | Set Facts
-  set_fact:
+  ansible.builtin.set_fact:
     lynis_file: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.{{ lynis_report }}"
 
 - name: General | Tests | Lynis | Set Facts 2
-  set_fact:
+  ansible.builtin.set_fact:
     lynis_temp_file: "{{ lynis_file }}.tmp"
 
 - name: General | Tests | Lynis | Install
-  git:
+  ansible.builtin.git:
     repo: https://github.com/CISOfy/lynis
     dest: "{{ lynis_install_dir }}"
     clone: true
     force: true
     update: true
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: General | Tests | Lynis | Ensure Permissions (Looking at you Parrot OS!)
-  file:
+  ansible.builtin.file:
     path: "{{ lynis_install_dir }}"
     state: directory
     mode: '0644'
     owner: root
     group: "{{ root_group }}"
-    recurse: yes
+    recurse: true
 
 - name: General | Tests | Lynis | Ensure Permissions 2
-  file:
+  ansible.builtin.file:
     path: "{{ lynis_install_dir }}/lynis"
     mode: '0755'
 
 - name: General | Tests | Lynis | Ensure Folder Permissions
-  file:
+  ansible.builtin.file:
     path: "{{ lynis_install_dir }}"
     state: directory
     mode: '0755'
-    recurse: no
+    recurse: false
 
 - name: General | Tests | Lynis | Run System Audit
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "./lynis audit system --no-colors > {{ lynis_temp_file }} 2>&1"
     - "mv {{ lynis_temp_file }} {{ lynis_file }}"
@@ -49,6 +49,6 @@
     chdir: "{{ lynis_install_dir }}"
 
 - name: General | Tests | Lynis | Make Report Readable
-  file:
+  ansible.builtin.file:
     path: "{{ lynis_file }}"
     mode: '0644'

tasks/general/tests/nmap.yml

@@ -2,16 +2,16 @@
 # Nmap port test
 
 - name: General | Tests | nmap | Set Facts
-  set_fact:
+  ansible.builtin.set_fact:
     nmap_file: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.{{ nmap_report }}"
     nmap_separator: "\n*******************************\n"
 
 - name: General | Tests | nmap | Set Facts 2
-  set_fact:
+  ansible.builtin.set_fact:
     nmap_temp_file: "{{ nmap_file }}.tmp"
 
 - name: General | Tests | nmap | Create Report
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "date > {{ nmap_temp_file }}"
     - "printf '{{ nmap_separator }}' >> {{ nmap_temp_file }}"
@@ -25,6 +25,6 @@
     - "mv {{ nmap_temp_file }} {{ nmap_file }}"
 
 - name: General | Tests | nmap | Make Viewable
-  file:
+  ansible.builtin.file:
     path: "{{ nmap_file }}"
     mode: '0644'

tasks/general/tests/services.yml

@@ -2,26 +2,37 @@
 # List all the services under the Reports folder.
 
 - name: General | Tests | Services | Set Facts
-  set_fact:
+  ansible.builtin.set_fact:
     services_report_file: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.services.txt"
     services_enabled_file: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.services-enabled.txt"
+    services_command: "echo 'Service Manager {{ ansible_service_mgr }} Not Recognized'"
+
+- name: General | Tests | Services | Set Facts | SystemD
+  ansible.builtin.set_fact:
     services_command: "systemctl list-unit-files"
+  when: ansible_service_mgr == "systemd"
+
+- name: General | Tests | Services | Set Facts | runit
+  ansible.builtin.set_fact:
+    services_command: 'for s in {{ runit_service_dir }}/*; do sv status "$s"; done'
+  when: ansible_service_mgr == "runit"
 
 - name: General | Tests | Services | Create Main Report
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "date > {{ services_report_file }}"
     - "echo '\n-= {{ services_command }} =-\n' >> {{ services_report_file }}"
     - "{{ services_command }} >> {{ services_report_file }}"
 
 - name: General | Tests | Services | Create Enabled Report
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "date > {{ services_enabled_file }}"
     - "echo '\n-= Enabled + Sorted =-\n' >> {{ services_enabled_file }}"
     - "grep 'enabled' {{ services_report_file }} | sort >> {{ services_enabled_file }}"
+  when: ansible_service_mgr == "systemd"
 
 - name: General | Tests | Services | Make Viewable
-  file:
+  ansible.builtin.file:
     path: "{{ services_report_file }}"
     mode: '0644'

tasks/miner/acct_mgmt/users.yml

@@ -4,20 +4,20 @@
 ## Gather ##
 
 - name: Miner | Account Management | Gather | Find Root Directory
-  shell: cd ~; pwd
+  ansible.builtin.shell: cd ~; pwd
   register: root_home
 
 
 ## Runner ##
 
 - name: Miner | Account Management | Users | MFN
-  user:
+  ansible.builtin.user:
     name: mfn
     comment: Miner Forty Niner
-    system: yes
-    groups: 
+    system: true
+    groups:
       - video
       - render
-    append: yes
+    append: true
     shell: "{{ bash_exec.stdout }}"
   register: user_mfn

tasks/miner/cron/ansible.yml

@@ -4,23 +4,23 @@
 ## Performance ##
 
 - name: Miner | Account Management | Cron | Ansible | Daily Performance Reboot
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: Daily Performance Reboot
     job: sudo reboot
     special_time: daily
     state: present
-    disabled: no
+    disabled: false
 
 
 ## Security ##
 
 - name: Miner | Account Management | Cron | Ansible | Daily Security Update [apt]
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: Daily Security Update
     job: sudo apt update && sudo apt dist-upgrade -y
     special_time: reboot
     state: present
-    disabled: yes
+    disabled: true
   when: ansible_pkg_mgr == "apt"

tasks/miner/cron/mfn.yml

@@ -4,7 +4,7 @@
 ## Mining ##
 
 - name: Miner | Account Management | Cron | MFN | Stop Jobs
-  cron:
+  ansible.builtin.cron:
     user: mfn
     name: "Stop {{ item.name }}"
     minute: "*/5"
@@ -14,7 +14,7 @@
   loop: "{{ miners }}"
 
 - name: Miner | Account Management | Cron | MFN | Start Jobs
-  cron:
+  ansible.builtin.cron:
     user: mfn
     name: "Start {{ item.name }}"
     job: "{{ item.command }}"

tasks/miner/debug.yml

@@ -2,7 +2,7 @@
 # Print out all inventory flags associated to mining.
 
 - name: Miner | DEBUG | Inventory Variables
-  debug:
+  ansible.builtin.debug:
     var: "{{ item }}"
   loop:
     - amdgpu

tasks/miner/drivers/amdgpu.yml

@@ -3,12 +3,12 @@
 
 ## Step 0/3: Dependencies ##
 - name: Miner | Driver | AMDGPU | Variables
-  set_fact:
+  ansible.builtin.set_fact:
     amdgpu_cron_job: AMDGPU - Need To Finish Installation
     amdgpu_cron_cmd: "{{ root_home.stdout }}/scm.sh"
 
 - name: Miner | Driver | AMDGPU | Install Dependencies
-  package:
+  ansible.builtin.package:
     name:
       - dkms
       - mesa-common-dev
@@ -16,42 +16,42 @@
     state: present
 
 - name: Miner | Driver | AMDGPU | Set GRUB Timer
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /etc/default/grub
     regexp: '^GRUB_TIMEOUT='
     line: 'GRUB_TIMEOUT=3'
     state: present
-    backup: yes
+    backup: true
 
 - name: Miner | Driver | AMDGPU | Remove Previous Run's Cron Job
-  cron:
+  ansible.builtin.cron:
     user: root
     name: "{{ amdgpu_cron_job }}"
     state: absent
 
 # Tests
 - name: Miner | Driver | AMDGPU | Check If GA Kernel Installed
-  shell: 'uname --kernel-release | grep 5.4.0-65-generic'
+  ansible.builtin.shell: 'uname --kernel-release | grep 5.4.0-65-generic'
   register: ga_kernel
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | Check If HWE Kernel Installed
-  shell: 'apt search linux-image-5.8.0-* | grep -c installed'
+  ansible.builtin.shell: 'apt search linux-image-5.8.0-* | grep -c installed'
   register: hwe_kernel
-  ignore_errors: yes
+  ignore_errors: true
 
 #- name: Miner | Driver | AMDGPU | Check If All Driver Installed
-#  shell: 'which amdgpu-uninstall'
+#  ansible.builtin.shell: 'which amdgpu-uninstall'
 #  register: amdgpu_install
-#  ignore_errors: yes
+#  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | Check If Pro Driver Installed
-  shell: 'amdgpu-pro-uninstall -y'
+  ansible.builtin.shell: 'amdgpu-pro-uninstall -y'
   register: amdgpu_install
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Miner | Driver | AMDGPU | DEBUG
-  debug:
+  ansible.builtin.debug:
     var: "{{ item }}"
   loop:
     - ga_kernel
@@ -62,11 +62,11 @@
 
 ## Step 1/3: Get Correct Kernel ##
 - name: Miner | Driver | AMDGPU | Install Recommended GA Kernel
-  shell: apt install --install-recommends linux-generic
+  ansible.builtin.shell: apt install --install-recommends linux-generic
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Install Specific GA Kernel For Booting
-  package:
+  ansible.builtin.package:
     name:
       - linux-headers-5.4.0-65
       - linux-headers-5.4.0-65-generic
@@ -77,30 +77,30 @@
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Prepare GRUB To Boot GA Kernel
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /etc/default/grub
     regexp: '^GRUB_DEFAULT='
     line: 'GRUB_DEFAULT="Advanced options for Ubuntu>Ubuntu, with Linux 5.4.0-65-generic"'
     state: present
-    backup: yes
+    backup: true
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Update GRUB
-  shell: update-grub
+  ansible.builtin.shell: update-grub
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Prepare Cron Job To SCM
-  cron:
+  ansible.builtin.cron:
     user: root
     name: "{{ amdgpu_cron_job }}"
     special_time: reboot
     job: "{{ amdgpu_cron_cmd }}"
     state: present
-    disabled: no
+    disabled: false
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - name: Miner | Driver | AMDGPU | Reboot To GA Kernel
-  shell: reboot
+  ansible.builtin.shell: reboot
   when: amdgpu_install.failed and hwe_kernel.stdout != "0" and ga_kernel.failed
 
 - pause:
@@ -111,7 +111,7 @@
 
 ## Step 2/3: Remove Incorrect Kernels ##
 - name: Miner | Driver | AMDGPU | Remove Bad Kernels
-  shell: "apt remove --purge linux-generic-hwe-20.04 \
+  ansible.builtin.shell: "apt remove --purge linux-generic-hwe-20.04 \
                              linux-oem-20.04 \
                              linux-hwe-* \
                              linux-oem-* \
@@ -121,36 +121,36 @@
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 - name: Miner | Driver | AMDGPU | Update + Clean System
-  shell: "apt update; apt dist-upgrade -y; apt autoremove --purge -y"
+  ansible.builtin.shell: "apt update; apt dist-upgrade -y; apt autoremove --purge -y"
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 # This is to ensure we can test adding `apt install --install-recommends linux-generic` later
 - name: Miner | Driver | AMDGPU | Boot Default Kernel
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: /etc/default/grub
     regexp: '^GRUB_DEFAULT='
     line: 'GRUB_DEFAULT=0'
     state: present
-    backup: yes
+    backup: true
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 - name: Miner | Driver | AMDGPU | Update GRUB
-  shell: update-grub
+  ansible.builtin.shell: update-grub
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 - name: Miner | Driver | AMDGPU | Prepare Cron Job To SCM
-  cron:
+  ansible.builtin.cron:
     user: root
     name: "{{ amdgpu_cron_job }}"
     special_time: reboot
     job: "{{ amdgpu_cron_cmd }}"
     state: present
-    disabled: no
+    disabled: false
   when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 
 # This reboot may not be necessary.
 #- name: Miner | Driver | AMDGPU | Reboot To Ensure GA Is 0
-#  shell: reboot
+#  ansible.builtin.shell: reboot
 #  when: amdgpu_install.failed and hwe_kernel.stdout != "0"
 #
 #- pause:
@@ -161,34 +161,34 @@
 
 ## Step 3/3: Install AMD PRO Driver ##
 - name: Miner | Driver | AMDGPU | Download Driver
-  shell: 'scp {{ user }}@leet:InstallFiles/Drivers/amdgpu-pro-20.45-1188099-ubuntu-20.04.tar.xz {{ root_home.stdout }}/Downloads/'
+  ansible.builtin.shell: 'scp {{ user }}@leet:InstallFiles/Drivers/amdgpu-pro-20.45-1188099-ubuntu-20.04.tar.xz {{ root_home.stdout }}/Downloads/'
   when: amdgpu_install.failed or "1" == "1"
 
 - name: Miner | Driver | AMDGPU | Extract Tarball
-  shell: 'cd {{ root_home.stdout }}/Downloads; tar -xvf amdgpu-pro-20.45-1188099-ubuntu-20.04.tar.xz'
+  ansible.builtin.shell: 'cd {{ root_home.stdout }}/Downloads; tar -xvf amdgpu-pro-20.45-1188099-ubuntu-20.04.tar.xz'
   when: amdgpu_install.failed or "1" == "1"
 
 ## Only one driver set can exist at a time! ##
 #- name: Miner | Driver | AMDGPU | Install AMDGPU All Driver
-#  shell: 'cd {{ root_home.stdout }}/Downloads/amdgpu-pro-20.45-1188099-ubuntu-20.04; ./amdgpu-install -y'
+#  ansible.builtin.shell: 'cd {{ root_home.stdout }}/Downloads/amdgpu-pro-20.45-1188099-ubuntu-20.04; ./amdgpu-install -y'
 #  when: amdgpu_install.failed
 
 - name: Miner | Driver | AMDGPU | Install AMDGPU-Pro Driver
-  shell: 'cd {{ root_home.stdout }}/Downloads/amdgpu-pro-20.45-1188099-ubuntu-20.04; ./amdgpu-pro-install -y --opencl=pal,legacy'
+  ansible.builtin.shell: 'cd {{ root_home.stdout }}/Downloads/amdgpu-pro-20.45-1188099-ubuntu-20.04; ./amdgpu-pro-install -y --opencl=pal,legacy'
   when: amdgpu_install.failed or "1" == "1"
 
 - name: Miner | Driver | AMDGPU | Prepare Cron Job To SCM
-  cron:
+  ansible.builtin.cron:
     user: root
     name: "{{ amdgpu_cron_job }}"
     special_time: reboot
     job: "{{ amdgpu_cron_cmd }}"
     state: present
-    disabled: no
+    disabled: false
   when: amdgpu_install.failed
 
 - name: Miner | Driver | AMDGPU | Reboot To GA Kernel
-  shell: reboot
+  ansible.builtin.shell: reboot
   when: amdgpu_install.failed
 
 - pause:
@@ -199,10 +199,10 @@
 
 ## We're done! ##
 - name: Miner | Driver | AMDGPU | Test Driver
-  shell: clinfo -l
+  ansible.builtin.shell: clinfo -l
   register: clinfo
 
 - name: Miner | Driver | AMDGPU | Test Results
-  debug:
+  ansible.builtin.debug:
     var: clinfo
-  ignore_errors: yes
+  ignore_errors: true

tasks/miner/software/ethminer.yml

@@ -3,86 +3,86 @@
 
 ## Dependencies ##
 - name: Miner | Software | Ethminer | Install Dependencies
-  package: 
-    name: 
-      - build-essential 
-      - dkms 
-      - cmake 
-      - perl 
-      - libdbus-1-dev 
+  ansible.builtin.package:
+    name:
+      - build-essential
+      - dkms
+      - cmake
+      - perl
+      - libdbus-1-dev
       - mesa-common-dev
     state: present
 
 - name: Miner | Software | Ethminer | Add PPA
-  apt_repository: 
+  apt_repository:
     repo: ppa:ethereum/ethereum
-    update_cache: yes
+    update_cache: true
     state: present
 
 - name: Miner | Software | Ethminer | Install Ethereum
-  package: 
+  ansible.builtin.package:
     name: ethereum
     state: present
 
 
 ## Test ##
 - name: Miner | Software | Ethminer | Test If Installed
-  shell: "which ethminer"
+  ansible.builtin.shell: "which ethminer"
   register: ethminer_install
-  ignore_errors: yes
+  ignore_errors: true
 
 
 ## Download ##
 - name: Miner | Software | Ethminer | Remove Git Repo
-  shell: rm -rf ethminer
+  ansible.builtin.shell: rm -rf ethminer
   args:
     chdir: "{{ root_home.stdout }}/Downloads"
-  ignore_errors: yes
+  ignore_errors: true
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | Clone Git Repo
-  shell: git clone https://github.com/ethereum-mining/ethminer.git
+  ansible.builtin.shell: git clone https://github.com/ethereum-mining/ethminer.git
   args:
     chdir: "{{ root_home.stdout }}/Downloads"
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | Update Repo's Repos
-  shell: git submodule update --init --recursive
+  ansible.builtin.shell: git submodule update --init --recursive
   args:
     chdir: "{{ root_home.stdout }}/Downloads/ethminer"
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | Create Build Folder
-  shell: mkdir -p build
+  ansible.builtin.shell: mkdir -p build
   args:
     chdir: "{{ root_home.stdout }}/Downloads/ethminer"
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | Default Flags
-  set_fact:
+  ansible.builtin.set_fact:
     opencl_flag: "OFF"
     cuda_flag: "OFF"
     dbus_flag: "OFF"
     sys_opencl_flag: "ON"
 
 - name: Miner | Software | Ethminer | Determine OPENCL Flag
-  set_fact:
+  ansible.builtin.set_fact:
     opencl_flag: "ON"
     sys_opencl_flag: "OFF"
-  when: amdgpu == true
+  when: amdgpu
 
 - name: Miner | Software | Ethminer | Determine CUDA Flag
-  set_fact:
+  ansible.builtin.set_fact:
     cuda_flag: "ON"
-  when: nvidia == true
+  when: nvidia
 
 - name: Miner | Software | Ethminer | Determine DBUS Flag
-  set_fact:
+  ansible.builtin.set_fact:
     dbus_flag: "ON"
   when: ansible_distribution == "Pop!_OS"
 
 - name: Miner | Software | Ethminer | cmake Flags
-  shell: "cmake .. -DETHASHCL={{ opencl_flag }} \
+  ansible.builtin.shell: "cmake .. -DETHASHCL={{ opencl_flag }} \
                    -DETHASHCUDA={{ cuda_flag }} \
                    -DAPICORE=ON \
                    -DBINKERN=ON \
@@ -94,13 +94,13 @@
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | cmake Build
-  shell: cmake --build .
+  ansible.builtin.shell: cmake --build .
   args:
     chdir: "{{ root_home.stdout }}/Downloads/ethminer/build"
   when: ethminer_install.failed
 
 - name: Miner | Software | Ethminer | make install
-  shell: make install
+  ansible.builtin.shell: make install
   args:
     chdir: "{{ root_home.stdout }}/Downloads/ethminer/build"
   when: ethminer_install.failed
@@ -108,7 +108,7 @@
 
 ## Personal Script Setup ##
 - name: Miner | Software | Ethminer | Script
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "scp {{ user }}@leet:InstallFiles/Miners/ethminer/ethminer.sh {{ user_mfn.home }}/"
     - "chmod 755 {{ user_mfn.home }}/ethminer.sh"

tasks/miner/software/nanominer.yml

@@ -6,16 +6,18 @@
 ## Installation ##
 
 - name: Miner | Software | Nanominer | Installation | Create Home
-  shell: "mkdir -p {{ nanominer_home }}"
+  ansible.builtin.shell: "mkdir -p {{ nanominer_home }}"
+  become: true
   become_user: mfn
 
 - name: Miner | Software | Nanominer | Installation | Download Tarball
-  shell: "scp {{ file_server }}:{{ nanominer_tar_remote }} {{ nanominer_tar_local }}; chown mfn {{ nanominer_tar_local }}"
+  ansible.builtin.shell: "scp {{ file_server }}:{{ nanominer_tar_remote }} {{ nanominer_tar_local }}; chown mfn {{ nanominer_tar_local }}"
 
 - name: Miner | Software | Nanominer | Installation | Extract Tarball
-  shell: "tar -xvf {{ nanominer_tar_local }}"
+  ansible.builtin.shell: "tar -xvf {{ nanominer_tar_local }}"
   args:
     chdir: "{{ nanominer_home }}"
+  become: true
   become_user: mfn
 
 
@@ -25,13 +27,13 @@
 # Delete Old Config #
 
 - name: Miner | Software | Nanominer | Configuration | Reset
-  shell: "mv {{ nanominer_config }} ~/TRASH/"
-  ignore_errors: yes
+  ansible.builtin.shell: "mv {{ nanominer_config }} ~/TRASH/"
+  ignore_errors: true
 
 # CPU #
 
 - name: Miner | Software | Nanominer | Configuration | CPU | Header Info
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ nanominer_config }}"
     block: |
       [{{ item.algorithm }}]
@@ -48,35 +50,38 @@
     marker_begin: ';;;;;;;;;;;; BEGIN'
     marker_end: ' END'
     state: "{{ item.state }}"
-    create: yes
+    create: true
   loop:
     - { "algorithm": "RandomX", "wallet": '{{ wallet_xmr }}', "state": "{{ (nanominer_cpu == 'xmr') | ternary('present', 'absent') }}"}
+  become: true
   become_user: mfn
   when: nanominer_cpu != false
 
 - name: Miner | Software | Nanominer | Configuration | CPU | Add Pools
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ nanominer_config }}"
     line: "pool{{item.priority}} = {{ item.name }}"
     state: present
-    create: no
+    create: false
   loop: "{{ cpu_pool }}"
+  become: true
   become_user: mfn
   when: nanominer_cpu != false
 
 - name: Miner | Software | Nanominer | Configuration | CPU | End Section
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ nanominer_config }}"
     line: ";;;;;;;;;;;;; END CPU"
     state: present
-    create: no
+    create: false
+  become: true
   become_user: mfn
   when: nanominer_cpu != false
 
 # Add Spacing #
 
 - name: Miner | Software | Nanominer | Configuration | Spacing
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ nanominer_config }}"
     block: |
       ;
@@ -84,14 +89,15 @@
       ;
     marker: ';'
     state: present
-    create: no
+    create: false
+  become: true
   become_user: mfn
   when: nanominer_config is file
 
 # GPU #
 
 - name: Miner | Software | Nanominer | Configuration | GPU | Header Info
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ nanominer_config }}"
     block: |
       [{{ item.algorithm }}]
@@ -113,28 +119,31 @@
     marker_begin: ';;;;;;;;;;;; BEGIN'
     marker_end: ' END'
     state: "{{ item.state }}"
-    create: yes
+    create: true
   loop:
     - { "algorithm": "Ethash", "wallet": '{{ wallet_eth }}', "state": "{{ (nanominer_gpu == 'eth') | ternary('present', 'absent') }}"}
+  become: true
   become_user: mfn
   when: nanominer_gpu != false
 
 - name: Miner | Software | Nanominer | Configuration | GPU | Add Pools
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ nanominer_config }}"
     line: "pool{{item.priority}} = {{ item.name }}"
     state: present
-    create: no
+    create: false
   loop: "{{ gpu_pool }}"
+  become: true
   become_user: mfn
   when: nanominer_gpu != false
 
 - name: Miner | Software | Nanominer | Configuration | GPU | End Section
-  lineinfile:
+  ansible.builtin.lineinfile:
     path: "{{ nanominer_config }}"
     line: ";;;;;;;;;;;;; END GPU"
     state: present
-    create: no
+    create: false
+  become: true
   become_user: mfn
   when: nanominer_gpu != false
 
@@ -143,15 +152,15 @@
 ## Executable ##
 
 - name: Miner | Software | Nanominer | Executable | Reset
-  shell: "mv {{ nanominer_script }} ~/TRASH/"
-  ignore_errors: yes
+  ansible.builtin.shell: "mv {{ nanominer_script }} ~/TRASH/"
+  ignore_errors: true
 
 - name: Miner | Software | Nanominer | Executable | Create
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ nanominer_script }}"
     block: |
       # 2021-02-15 - Automate nanominer script creation.
-      
+
       date
       whoami
       pwd
@@ -164,7 +173,8 @@
     marker_begin: "#!{{ bash_exec.stdout }} -x"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+  become: true
   become_user: mfn
 
 
@@ -172,7 +182,7 @@
 ## Permissions ##
 
 - name: Miner | Software | Nanominer | Permissions
-  shell: "chown -R mfn {{ user_mfn.home }}/nanominer*; chmod -R 755 {{ user_mfn.home }}/nanominer*"
+  ansible.builtin.shell: "chown -R mfn {{ user_mfn.home }}/nanominer*; chmod -R 755 {{ user_mfn.home }}/nanominer*"
 
 
 
@@ -182,6 +192,7 @@
 # It should kill the miner if a user logs into an X session, such as if I'm gaming.
 # Then once I log out the job should come back within the minute.
 - name: Miner | Software | Nanominer | Reload
-  shell: "killall {{ nanominer_script }}; killall {{ nanominer_exec }}; killall nanominer.sh; killall nanominer"
+  ansible.builtin.shell: "killall {{ nanominer_script }}; killall {{ nanominer_exec }}; killall nanominer.sh; killall nanominer"
+  become: true
   become_user: mfn
-  ignore_errors: yes
+  ignore_errors: true

tasks/miner/software/xmr-stak-cpu.yml

@@ -2,5 +2,5 @@
 # Mine monero with CPUs!
 
 - name: Miner | Software | XMR-Stak-CPU
-  shell: exit 0
+  ansible.builtin.shell: exit 0
   when: '"1" == "0"'

tasks/server/cron/certbot.yml

@@ -2,15 +2,15 @@
 # Ensure certbot renews certs on time.
 
 - name: Server | Cron | Certbot | Find Executable
-  shell: which certbot
+  ansible.builtin.shell: which certbot
   register: certbot
 
 - name: Server | Cron | Certbot | Monthly Renewal
-  cron:
+  ansible.builtin.cron:
     user: root
     name: Monthly Renewal
     job: "{{ certbot.stdout }} renew"
     special_time: weekly
     state: present
-    disabled: no
-  when: certbot == true and certbot.stdout is defined
+    disabled: false
+  when: certbot and certbot.stdout is defined

tasks/server/software/grafana.yml

@@ -5,8 +5,8 @@
 ## Pre-reqs ##
 
 - name: Server | Grafana | Pre-Requirements | Install
-  package: 
-    name: 
+  ansible.builtin.package:
+    name:
       - apt-transport-https
       - software-properties-common
       - wget
@@ -16,22 +16,22 @@
 ## Install ##
 
 - name: Server | Grafana | Install | Add Repo
-  shell: '{{ item }}'
+  ansible.builtin.shell: '{{ item }}'
   loop:
     - wget -q -O - https://packages.grafana.com/gpg.key | apt-key add -
     - echo "deb https://packages.grafana.com/oss/deb stable main" | tee /etc/apt/sources.list.d/grafana.list
     - apt update
 
 - name: Server | Grafana | Install | Main
-  package: 
-    name: 
+  ansible.builtin.package:
+    name:
       - grafana
     state: present
 
 ## Configure ##
 
 - name: Server | Grafana | Configure
-  shell: '{{ item }}'
+  ansible.builtin.shell: '{{ item }}'
   loop:
     - systemctl daemon-reload
     - systemctl enable grafana-server

tasks/server/software/hugo.yml

@@ -2,17 +2,17 @@
 # Install HUGO to host sites like parrotsec.org
 
 - name: Server | Software | HUGO | Variables (apt)
-  set_fact:
+  ansible.builtin.set_fact:
     hugo_package: hugo
   when: ansible_pkg_mgr == "apt"
 
 - name: Server | Software | HUGO | Variables (FreeBSD)
-  set_fact:
+  ansible.builtin.set_fact:
     hugo_package: gohugo
   when: ansible_system == "FreeBSD"
 
 
 - name: Server | Software | HUGO | Variables (FreeBSD)
-  package:
+  ansible.builtin.package:
     name: "{{ hugo_package }}"
     state: present

tasks/server/software/influxdb1.yml

@@ -3,12 +3,12 @@
 # https://docs.influxdata.com/influxdb/v1.8/introduction/get-started/
 
 - name: Server | InfluxDB1 | Check
-  shell: which influxd
+  ansible.builtin.shell: which influxd
   register: influxdb_check
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | InfluxDB1 | Install
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   args:
     chdir: "{{ ansible_env.HOME }}/Downloads/"
   loop:
@@ -20,7 +20,7 @@
   when: influxdb_check.failed
 
 - name: Server | InfluxDB1 | Config
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - influx -execute "create database main"
     - influx -execute "show databases"

tasks/server/software/influxdb2.yml

@@ -3,12 +3,12 @@
 # https://docs.influxdata.com/influxdb/v2.0/get-started/?t=Linux
 
 - name: Server | InfluxDB2 | Check
-  shell: which influxd
+  ansible.builtin.shell: which influxd
   register: influxdb_check
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | InfluxDB2 | Install
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   args:
     chdir: "{{ ansible_env.HOME }}/Downloads/"
   loop:
@@ -20,6 +20,6 @@
   when: influxdb_check.failed
 
 - name: Server | InfluxDB2 | Config
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - influx setup -f -u {{ user }} -p initpassword -o Hyperling -b main -r 0

tasks/server/software/onlyoffice.yml

@@ -4,8 +4,8 @@
 ## Pre-Reqs ##
 
 - name: Server | OnlyOffice | Pre-Requirements | Install
-  package: 
-    name: 
+  ansible.builtin.package:
+    name:
       - gnupg
       - python3-certbot-nginx
     state: present
@@ -17,36 +17,37 @@
 # Dependencies #
 
 - name: Server | OnlyOffice | Postgres | Install
-  package: 
+  ansible.builtin.package:
     name: postgresql
     state: present
 
 - name: Server | OnlyOffice | Postgres | Configure
-  shell: '{{ item }}'
+  ansible.builtin.shell: '{{ item }}'
   loop:
     - psql -c "CREATE DATABASE onlyoffice;"
     - psql -c "CREATE USER onlyoffice WITH password 'onlyoffice';"
     - psql -c "GRANT ALL privileges ON DATABASE onlyoffice TO onlyoffice;"
+  become: true
   become_user: postgres
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | OnlyOffice | RabbitMQ | Install
-  package: 
+  ansible.builtin.package:
     name: rabbitmq-server
     state: present
 
 # Actual Program #
 
 - name: Server | OnlyOffice | Docs | Add Repo
-  shell: '{{ item }}'
+  ansible.builtin.shell: '{{ item }}'
   loop:
     - apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys CB2DE8E5
     - echo "deb https://download.onlyoffice.com/repo/debian squeeze main" | tee /etc/apt/sources.list.d/onlyoffice.list
     - apt update
 
 - name: Server | OnlyOffice | Docs | Install
-  package: 
-    name: 
+  ansible.builtin.package:
+    name:
       - ttf-mscorefonts-installer
       - onlyoffice-documentserver
     state: present
@@ -59,32 +60,32 @@
 # Certs #
 
 #- name: Server | OnlyOffice | HTTPS | Check For Cert
-#  shell: "ls -l /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/{fullchain,privkey}.pem"
+#  ansible.builtin.shell: "ls -l /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/{fullchain,privkey}.pem"
 #  register: onlyoffice_cert
-#  ignore_errors: yes
+#  ignore_errors: true
 #
 #- name: Server | OnlyOffice | HTTPS | Create Cert
-#  shell: "certbot --nginx -d {{ ansible_hostname }}.{{ domain }}"
+#  ansible.builtin.shell: "certbot --nginx -d {{ ansible_hostname }}.{{ domain }}"
 #  when: onlyoffice_cert.failed
 
 # Config #
 
 #- name: Server | OnlyOffice | HTTPS | Check For Config
-#  shell: ls -l /etc/onlyoffice/documentserver/nginx/ds.conf
+#  ansible.builtin.shell: ls -l /etc/onlyoffice/documentserver/nginx/ds.conf
 #  register: onlyoffice_cert
 #
 #- name: Server | OnlyOffice | HTTPS | Create Config
-#  shell: cp -f /etc/onlyoffice/documentserver/nginx/ds-ssl.conf.tmpl /etc/onlyoffice/documentserver/nginx/ds.conf
+#  ansible.builtin.shell: cp -f /etc/onlyoffice/documentserver/nginx/ds-ssl.conf.tmpl /etc/onlyoffice/documentserver/nginx/ds.conf
 #  when: onlyoffice_cert.failed
 #
 #- name: Server | OnlyOffice | HTTPS | Modify Config
-#  lineinfile:
+#  ansible.builtin.lineinfile:
 #    path: /etc/onlyoffice/documentserver/nginx/ds.conf
 #    regexp: '{{ item.regexp }}'
 #    line: '{{ item.line }}; # MANAGED BY ANSIBLE'
 #    state: present
-#    create: no
-#    backup: yes
+#    create: false
+#    backup: true
 #  loop:
 #    - { "regexp": "ssl_certificate ", "line": "  ssl_certificate /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/fullchain.pem" }
 #    - { "regexp": "ssl_certificate_key ", "line": "  ssl_certificate_key /etc/letsencrypt/live/{{ ansible_hostname }}.{{ domain }}/privkey.pem" }
@@ -92,7 +93,7 @@
 # Services #
 
 - name: Server | OnlyOffice | HTTPS | Reload nginx
-  service:
+  ansible.builtin.service:
     name: nginx
     status: reloaded
-  ignore_errors: yes
+  ignore_errors: true

tasks/server/software/services.yml

@@ -4,17 +4,17 @@
 ## ACPID ##
 
 - name: Server | Software | Services | ACPID | Install
-  package:
+  ansible.builtin.package:
     name: "{{ acpi }}"
     state: present
   when: ansible_system == "Linux"
-  ignore_errors: yes
+  ignore_errors: true
 
 - name: Server | Software | Services | ACPID | Enable
-  service:
+  ansible.builtin.service:
     name: "{{ acpi }}"
     pattern: "{{ acpi_pattern }}"
     state: started
-    enabled: yes
+    enabled: true
   when: ansible_system == "Linux"
-  ignore_errors: yes
+  ignore_errors: true

tasks/workstation/freebsd/cron/ansible.yml

@@ -2,10 +2,10 @@
 # Cron jobs specific to FreeBSD
 
 - name: General | Cron | Ansible | FreeBSD | Enable Security Update
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: "Security Update"
     special_time: weekly
     job: "sudo freebsd-update cron -t me@hyperling.com"
     state: present
-    disabled: no
+    disabled: false

tasks/workstation/freebsd/software/gnome.yml

@@ -2,7 +2,7 @@
 # Provide FreeBSD with a DE.
 
 - name: Workstation | FreeBSD | Software | GUI | Install UI Components
-  package: 
+  ansible.builtin.package:
     name:
     - xorg
     - gnome3-lite
@@ -16,7 +16,7 @@
     state: present
 
 - name: Workstation | FreeBSD | Software | GUI | Create rc.conf Entries
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ rc_conf }}"
     marker: "# {mark} MANAGED BY ANSIBLE | GNOME Components"
     block: |
@@ -25,19 +25,19 @@
       gnome_enable="YES"
       #gdm_enable="YES"
       lightdm_enable="YES"
-    create: yes
-    backup: yes
+    create: true
+    backup: true
 
 - name: Workstation | FreeBSD | Software | GUI | Create fstab Entries
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: /etc/fstab
     block: |
       proc            /proc           procfs  rw      0       0
     marker: '# {mark} MANAGED BY ANSIBLE | GNOME Components'
     state: present
-    backup: yes
+    backup: true
 
 - name: Workstation | FreeBSD | Software | GUI | Mount All
-  shell: mount -a
+  ansible.builtin.shell: mount -a
   args:
     warn: false

tasks/workstation/freebsd/software/gpu.yml

@@ -2,16 +2,16 @@
 # Provide FreeBSD with GPU driver.
 
 - name: Workstation | FreeBSD | Software | GPU Driver | Install
-  package: 
+  ansible.builtin.package:
     name:
     - drm-kmod
     state: present
 
 - name: Workstation | FreeBSD | Software | GPU Driver | Create rc.conf Entries
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ rc_conf }}"
     marker: "# {mark} MANAGED BY ANSIBLE | GPU Components"
     block: |
       kld_list="{{ freebsd_gpu }}"
-    create: yes
-    backup: yes
+    create: true
+    backup: true

tasks/workstation/freebsd/software/packages.yml

@@ -4,7 +4,7 @@
 # General #
 
 - name: Workstation | FreeBSD | Software | Packages | General | Install
-  package:
+  ansible.builtin.package:
     name:
     - "{{ firefox_esr }}"
     - "{{ evolution }}"
@@ -13,7 +13,7 @@
     state: present
 
 - name: Workstation | FreeBSD | Software | Packages | General | Uninstall Bloat
-  package:
+  ansible.builtin.package:
     name:
     - "{{ firefox }}"
     - "{{ thunderbird }}"
@@ -22,23 +22,23 @@
 # Coding #
 
 - name: Workstation | FreeBSD | Software | Packages | Coding | Install
-  package:
+  ansible.builtin.package:
     name:
     - vscode
     state: present
-  when: coding == true
+  when: coding
 
 - name: Workstation | FreeBSD | Software | Packages | Coding | Install
-  package:
+  ansible.builtin.package:
     name:
     - vscode
     state: absent
-  when: not coding == true
+  when: not coding
 
 # Media Editors #
 
 - name: Workstation | FreeBSD | Software | Packages | Editing | Install
-  package:
+  ansible.builtin.package:
     name:
     - gimp
     - shotcut
@@ -47,7 +47,7 @@
   when: editing in (true, "video")
 
 - name: Workstation | FreeBSD | Software | Packages | Editing | Install
-  package:
+  ansible.builtin.package:
     name:
     - gimp
     - shotcut
@@ -58,17 +58,17 @@
 # Gaming #
 
 - name: Workstation | FreeBSD | Software | Packages | Gaming | Install
-  package:
+  ansible.builtin.package:
     name:
     - 0ad
     - supertuxkart
     state: present
-  when: gaming == true
+  when: gaming
 
 - name: Workstation | FreeBSD | Software | Packages | Gaming | Install
-  package:
+  ansible.builtin.package:
     name:
     - 0ad
     - supertuxkart
     state: absent
-  when: not gaming == true
+  when: not gaming

tasks/workstation/linux/cron/ansible.yml

@@ -2,21 +2,21 @@
 # Cron jobs specific to Linux
 
 - name: General | Cron | Ansible | Linux | Update System Flatpaks
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: "Update System Flatpaks"
     special_time: hourly
     job: "sudo flatpak update --noninteractive"
     state: present
-    disabled: "{{ 'yes' if battery else 'no' }}"
+    disabled: true # "{{ 'yes' if battery else 'no' }}"
   when: flatpak_distro
 
 - name: General | Cron | Ansible | Linux | Update User Flatpaks
-  cron:
+  ansible.builtin.cron:
     user: ansible
     name: "Update User Flatpaks"
     special_time: hourly
     job: "sudo -u {{ user }} flatpak update --noninteractive"
     state: present
-    disabled: "{{ 'yes' if battery else 'no' }}"
+    disabled: true # "{{ 'yes' if battery else 'no' }}"
   when: flatpak_distro

tasks/workstation/linux/software/android.yml

@@ -12,23 +12,34 @@
 # Command-line tools is all Flutter actually needs:
 #   https://dl.google.com/android/repository/commandlinetools-linux-11076708_latest.zip
 
-- name: Workstation | Linux | Software | Android | Facts [1/3]
-  set_fact:
+- name: Workstation | Linux | Software | Android | Facts [01]
+  ansible.builtin.set_fact:
     android_url: "https://dl.google.com/android/repository/commandlinetools-linux-11076708_latest.zip"
     android_download_file: "{{ user_user.home }}/Downloads/android-cmdline-tools.tar.xz"
     android_sdk_location: "{{ user_user.home }}/SDKs/Android/Sdk"
     android_report_file: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.sdk.android.txt"
 
-- name: Workstation | Linux | Software | Android | Facts [2/3]
-  set_fact:
+- name: Workstation | Linux | Software | Android | Facts [02]
+  ansible.builtin.set_fact:
     android_bin_location: "{{ android_sdk_location }}/platform-tools"
     android_sdk_cmdline_temp: "{{ android_sdk_location }}/ansible"
     android_sdk_cmdline_final: "{{ android_sdk_location }}/cmdline-tools/latest/bin"
 
-- name: Workstation | Linux | Software | Android | Facts [3/3]
-  set_fact:
+- name: Workstation | Linux | Software | Android | Facts [03]
+  ansible.builtin.set_fact:
     android_sdkmanager_temp: "{{ android_sdk_cmdline_temp }}/cmdline-tools/bin/sdkmanager"
     android_sdkmanager_final: "{{ android_sdk_cmdline_final }}/sdkmanager"
+    android_sdkmanager_final2: "{{ android_sdk_cmdline_final }}/android"
+
+- name: Workstation | Linux | Software | Android | Facts [04]
+  ansible.builtin.set_fact:
+    android_sdkmanager2: "{{ android_sdkmanager_final2 }} sdk --sdk={{ android_sdk_location }}"
+
+- name: Workstation | Linux | Software | Android | Facts [05]
+  ansible.builtin.set_fact:
+    android_sdkmanager2_list: "{{ android_sdkmanager2 }} list"
+    android_sdkmanager2_install: "{{ android_sdkmanager2 }} install"
+    android_sdkmanager2_remove: "{{ android_sdkmanager2 }} remove"
 
 # Regarding images to download; the `default` is the smallest, then `playstore`.
 # The `google_apis` images are significantly larger than the `playstore` option.
@@ -68,163 +79,163 @@
 ### 14G	.
 
 - name: Workstation | Linux | Software | Android | Facts [Downloads]
-  set_fact:
+  ansible.builtin.set_fact:
     android_downloads_required:
-      ### 36 ###
-      - build-tools;36.0.0
-      - platforms;android-36
-      - sources;android-36
-      # Images
-      #- system-images;android-35;default;x86_64 # TODO: Switch once it exists.
-      - system-images;android-36;google_apis_playstore;x86_64
-      ### 16 ###
-      - platforms;android-16
-      - sources;android-16
-      # Images
-      - system-images;android-16;default;x86
+      ### 36 ### - Recommended by Android Studio and Flutter, deprecating August 2027.
+      - build-tools/36.0.0
+      - platforms/android-36
+      - sources/android-36
+      - system-images/android-36/default/x86_64
+      ### 35 ###
+      # Still used by Flutter to do Sunset Alarm compilations, even targeting 36, likely due to plugins.
+      - platforms/android-35
+      ### 24 ### - Base for Flutter.
+      - system-images/android-24/default/x86_64
+      ### 16 ### - Base for Android Studio.
+      - system-images/android-16/default/x86
     android_downloads_additional:
-      ### 35 ###
-      - platforms;android-35
-      - sources;android-35
-      # Images
-      - system-images;android-35;default;x86_64
-      ### 34 ###
-      - platforms;android-34
-      - sources;android-34
-      # Images
-      - system-images;android-34;default;x86_64
-      ### 33 ###
-      - platforms;android-33
-      - sources;android-33
-      # Images
-      - system-images;android-33;default;x86_64
+      ### 37 ### - Upcoming version, required by August 2027.
+      - build-tools/37.0.0
+      - platforms/android-37.0
+      - sources/android-37.0
       ### 30 ###
-      - platforms;android-30
-      - sources;android-30
-      # Images
-      - system-images;android-30;default;x86_64
-      ### 27 ###
-      - platforms;android-27
-      - sources;android-27
-      # Images
-      - system-images;android-27;default;x86_64
-      ### 21 ###
-      - platforms;android-21
-      - sources;android-21
-      # Images
-      - system-images;android-21;default;x86_64
+      - system-images/android-30/default/x86_64
     android_downloads_unused:
+      ### 37 ###
       ### 36 ###
-      # Images
-      - system-images;android-36;google_apis;x86_64
+      - system-images/android-36/google_apis_playstore/x86_64
+      - system-images/android-36/google_apis/x86_64
       ### 35 ###
-      - build-tools;35.0.0
-      - build-tools;35.0.1
-      # Images
-      - system-images;android-35;aosp_atd;x86_64 # ATD = Automated Test Device
-      - system-images;android-35;google_apis;x86_64
-      - system-images;android-35;google_apis_playstore;x86_64
+      - build-tools/35.0.0
+      - build-tools/35.0.1
+      - sources/android-35
+      - system-images/android-35/default/x86_64
+      - system-images/android-35/aosp_atd/x86_64 # ATD = Automated Test Device
+      - system-images/android-35/google_apis/x86_64
+      - system-images/android-35/google_apis_playstore/x86_64
       ### 34 ###
-      - build-tools;34.0.0
-      - platforms;android-34
-      - sources;android-34
-      # Images
-      - system-images;android-34;google_apis;x86_64
-      - system-images;android-34;google_apis_playstore;x86_64
+      - build-tools/34.0.0
+      - platforms/android-34
+      - sources/android-34
+      - system-images/android-34/default/x86_64
+      - system-images/android-34/google_apis/x86_64
+      - system-images/android-34/google_apis_playstore/x86_64
+      ### 33 ###
+      - platforms/android-33
+      - sources/android-33
+      - system-images/android-33/default/x86_64
+      ### 30 ###
+      - platforms/android-30
+      - sources/android-30
+      ### 27 ###
+      - platforms/android-27
+      - sources/android-27
+      - system-images/android-27/default/x86_64
+      ### 24 ###
+      - platforms/android-24
+      - sources/android-24
+      ### 21 ###
+      - platforms/android-21
+      - sources/android-21
+      - system-images/android-21/default/x86_64
       ### 16 ###
-      # Images
-      - system-images;android-16;google_apis;x86
+      - platforms/android-16
+      - sources/android-16
+      - system-images/android-16/google_apis/x86
       ### 15 ###
-      - platforms;android-15
-      - sources;android-15
-      # Images
-      - system-images;android-15;default;x86 # Not working in Android AVDs
+      - platforms/android-15
+      - sources/android-15
+      - system-images/android-15/default/x86 # Not working in Android AVDs
 
 ## Checks ##
 
 - name: Workstation | Linux | Software | Android | Check SDK Manager Exists [1/2]
-  stat:
+  ansible.builtin.stat:
     path: "{{ android_sdkmanager_temp }}"
     get_attributes: false
     get_checksum: false
     get_mime: false
   register: android_sdkmanager_temp_stat
-  when: coding == true
+  when: coding
 
 - name: Workstation | Linux | Software | Android | Check SDK Manager Exists [2/2]
-  stat:
+  ansible.builtin.stat:
     path: "{{ android_sdkmanager_final }}"
     get_attributes: false
     get_checksum: false
     get_mime: false
-  register: android_sdkmanager_final_stat
-  when: coding == true
+  register: android_sdkmanager_check
+  when: coding
 
 - name: Workstation | Linux | Software | Android | Check Download Exists
-  stat:
+  ansible.builtin.stat:
     path: "{{ android_download_file }}"
     get_attributes: false
     get_checksum: false
     get_mime: false
   register: android_download_stat
-  when: coding == true
+  when: coding
 
 ## Packages ##
 
 # https://docs.flutter.dev/get-started/install/linux/android
 - name: Workstation | Linux | Software | Android | Dependencies [Install]
-  package:
+  ansible.builtin.package:
     name:
-      - default-jdk
-      - libc6
-      - libncurses5
-      - libstdc++6
-      - lib32z1
-      - libbz2-1.0
+      - "{{ android_jdk }}"
+      - "{{ c_libs }}"
+      - "{{ ncurses }}"
+      - "{{ cpp_libs }}"
+      - "{{ z_libs }}"
+      - "{{ bzip }}"
+      - "{{ android_udev }}"
     state: present
-  when: coding == true
+  when: coding
 
 - name: Workstation | Linux | Software | Android | Dependencies [Remove]
-  package:
+  ansible.builtin.package:
     name:
-      - sdkmanager
+      - "{{ android_sdkmanager }}"
     state: absent
-  when: coding == true
+  when: coding
+    and ansible_pkg_mgr == "apt"
 
 ## Install SDK ##
 
 - name: Workstation | Linux | Software | Android | SDK
   block:
 
-  - name: Workstation | Linux | Software | Android | Download Commandline Tools
-    get_url:
-      url: "{{ android_url }}"
-      dest: "{{ android_download_file }}"
-      owner: "{{ user }}"
-      group: "{{ user }}"
-      mode: '0664'
-    when: not android_download_stat.stat.exists
+    - name: Workstation | Linux | Software | Android | Download Commandline Tools
+      ansible.builtin.get_url:
+        url: "{{ android_url }}"
+        dest: "{{ android_download_file }}"
+        owner: "{{ user }}"
+        group: "{{ user }}"
+        mode: '0664'
+      when: not android_download_stat.stat.exists
 
-  - name: Workstation | Linux | Software | Android | Create Folder
-    file:
-      path: "{{ android_sdk_cmdline_temp }}"
-      state: directory
-      owner: "{{ user }}"
-      group: "{{ user }}"
-      mode: '0755'
+    - name: Workstation | Linux | Software | Android | Create Folder
+      ansible.builtin.file:
+        path: "{{ android_sdk_cmdline_temp }}"
+        state: directory
+        owner: "{{ user }}"
+        group: "{{ user }}"
+        mode: '0755'
 
-  - name: Workstation | Linux | Software | Android | Extract Tools
-    unarchive:
-      src: "{{ android_download_file }}"
-      dest: "{{ android_sdk_cmdline_temp }}"
-      owner: "{{ user }}"
-      group: "{{ user }}"
+    - name: Workstation | Linux | Software | Android | Extract Tools
+      ansible.builtin.unarchive:
+        src: "{{ android_download_file }}"
+        dest: "{{ android_sdk_cmdline_temp }}"
+        owner: "{{ user }}"
+        group: "{{ user }}"
 
+  become: true
   become_user: "{{ user }}"
-  when: coding == true and not android_sdkmanager_temp_stat.stat.exists
+  when: coding
+    and not android_sdkmanager_temp_stat.stat.exists
 
 - name: Workstation | Linux | Software | Android | Delete Archive
-  file:
+  ansible.builtin.file:
     path: "{{ android_download_file }}"
     state: absent
 
@@ -232,128 +243,236 @@
 
 # This can only be run once, otherwise cmdline-tools creates latest-* folders.
 - name: Workstation | Linux | Software | Android | Install | Consistent Modules
-  shell: "yes | {{ android_sdkmanager_temp }} --install '{{ item }}' --sdk_root={{ android_sdk_location }}"
+  ansible.builtin.shell: "yes | {{ android_sdkmanager_temp }} --install '{{ item }}' --sdk_root={{ android_sdk_location }}"
   loop:
     # Current
-    - cmdline-tools;latest
+    - cmdline-tools/latest
     - platform-tools
     - emulator
+  become: true
   become_user: "{{ user }}"
-  when: coding == true and not android_sdkmanager_final_stat.stat.exists
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
+    and not android_sdkmanager_check.stat.exists
+
+# Report the preliminary installed packges.
+- name: Workstation | Linux | Software | Android | Report Modules
+  ansible.builtin.shell: "{{ android_sdkmanager2_list }} > {{ android_report_file }}"
+  become: true
+  become_user: "{{ user }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 # These are safe to run multiple times, and uses the new `latest` version.
 - name: Workstation | Linux | Software | Android | Install | Required Modules
-  shell: "yes | {{ android_sdkmanager_final }} --install '{{ item }}' --sdk_root={{ android_sdk_location }}"
+  ansible.builtin.shell: |
+    set -o pipefail
+    if ! cat {{ android_report_file }} | grep -v 'unknown' | grep -q '{{ item }}'; then
+      yes | {{ android_sdkmanager2_install }} '{{ item }}'
+
+      if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+        echo "INSTALLED"
+      else
+        echo "FAILED"
+      fi
+    fi
   loop: "{{ android_downloads_required }}"
+  register: install_required
+  changed_when: "'INSTALLED' in install_required.stdout"
+  failed_when: "'FAILED' in install_required.stdout"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  when: coding
 
 # Add more versions for testing across all the important platforms.
 - name: Workstation | Linux | Software | Android | Install | Additional Modules
-  shell: "yes | {{ android_sdkmanager_final }} --install '{{ item }}' --sdk_root={{ android_sdk_location }}"
+  ansible.builtin.shell: |
+    set -o pipefail
+    if ! cat {{ android_report_file }} | grep -v 'unknown' | grep -q '{{ item }}'; then
+      yes | {{ android_sdkmanager2_install }} '{{ item }}'
+
+      if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+        echo "INSTALLED"
+      else
+        echo "FAILED"
+      fi
+    fi
   loop: "{{ android_downloads_additional }}"
+  register: install_additional
+  changed_when: "'INSTALLED' in install_additional.stdout"
+  failed_when: "'FAILED' in install_additional.stdout"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true and sdks == true
+  when: coding
+    and sdks
 
 # Remove extra downloads if system is not meant for full amount of testing.
 - name: Workstation | Linux | Software | Android | Uninstall | Additional Modules
-  shell: "yes | {{ android_sdkmanager_final }} --uninstall '{{ item }}' --sdk_root={{ android_sdk_location }}"
+  ansible.builtin.shell: |
+    set -o pipefail
+    if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+      yes | {{ android_sdkmanager2_remove }} '{{ item }}'
+
+      if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+        echo "FAILED"
+      else
+        echo "REMOVED"
+      fi
+    fi
   loop: "{{ android_downloads_additional }}"
+  register: remove_additional
+  changed_when: "'REMOVED' in remove_additional.stdout"
+  failed_when: "'FAILED' in remove_additional.stdout"
+  become: true
   become_user: "{{ user }}"
-  when: coding != true or sdks != true
+  when: not coding
+     or not sdks
 
 # Remove any versions which used to be part of this script and no longer used.
 - name: Workstation | Linux | Software | Android | Uninstall | Unused Modules
-  shell: "yes | {{ android_sdkmanager_final }} --uninstall '{{ item }}' --sdk_root={{ android_sdk_location }}"
-  loop: "{{ android_downloads_unused }}"
-  become_user: "{{ user }}"
-  when: coding == true
+  ansible.builtin.shell: |
+    set -o pipefail
+    if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+      yes | {{ android_sdkmanager2_remove }} '{{ item }}'
 
-# Report the currently installed packges.
-- name: Workstation | Linux | Software | Android | Report Modules
-  shell: "{{ android_sdkmanager_final }} --list_installed --sdk_root={{ android_sdk_location }} > {{ android_report_file }}"
+      if cat {{ android_report_file }} | grep -q '{{ item }}'; then
+        echo "REMOVED"
+      else
+        echo "FAILED"
+      fi
+    fi
+  loop: "{{ android_downloads_unused }}"
+  register: remove_unused
+  changed_when: "'REMOVED' in remove_unused.stdout"
+  failed_when: "'FAILED' in remove_unused.stdout"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  when: coding
+
+# Report the currently installed packages.
+- name: Workstation | Linux | Software | Android | Report Modules
+  ansible.builtin.shell: "{{ android_sdkmanager2_list }} --all > {{ android_report_file }}"
+  become: true
+  become_user: "{{ user }}"
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 ## Flutter and Licenses ##
 
 - name: Workstation | Linux | Software | Android | Inform Flutter
-  shell: "{{ flutter }} config --android-sdk={{ android_sdk_location }}"
+  ansible.builtin.shell: "{{ flutter }} config --android-sdk={{ android_sdk_location }}"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 - name: Workstation | Linux | Software | Android | License Agreements [1/2]
-  shell: "yes | {{ android_sdkmanager_final }} --licenses --sdk_root={{ android_sdk_location }}"
+  ansible.builtin.shell: "yes | {{ android_sdkmanager_final }} --licenses --sdk_root={{ android_sdk_location }}"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 - name: Workstation | Linux | Software | Android | License Agreements [2/2]
-  shell: "yes | {{ flutter }} doctor --android-licenses"
+  ansible.builtin.shell: "yes | {{ flutter }} doctor --android-licenses"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 - name: Workstation | Linux | Software | Android | Refresh Flutter Doctor Report
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop: "{{ flutter_report_commands }}"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 ## Configure Environment ##
 
 - name: Workstation | Linux | Software | Android | Modify PATH (.bashrc)
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.bashrc"
     block: |
       export PATH="$PATH:{{ android_bin_location }}:{{ android_sdk_cmdline_final }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Android'
-    state: present
-    create: yes
-    backup: yes
+    state: absent
+    create: true
+    backup: true
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
-  when: coding == true and user_root.home != "" and user_user.home != ""
+  when: coding
+    and user_root.home != ""
+    and user_user.home != ""
 
 - name: Workstation | Linux | Software | Android | Modify PATH (.zshrc)
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.zshrc"
     block: |
       export PATH="$PATH:{{ android_bin_location }}:{{ android_sdk_cmdline_final }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Android'
-    state: present
-    create: yes
-    backup: yes
+    state: absent
+    create: true
+    backup: true
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
-  when: coding == true and user_root.home != "" and user_user.home != ""
+  when: coding
+    and user_root.home != ""
+    and user_user.home != ""
+
+- name: Workstation | Linux | Software | Flutter | Modify PATH (profiles)
+  ansible.builtin.blockinfile:
+    path: "{{ user_user.home }}/{{ item }}"
+    block: |
+      export ANDROID_HOME="{{ android_sdk_location }}"
+      export ANDROID_SDK_ROOT="$ANDROID_HOME"
+      export PATH="$PATH:{{ android_bin_location }}:{{ android_sdk_cmdline_final }}"
+    marker: '# {mark} MANAGED BY ANSIBLE | Android'
+    state: present
+    create: true
+    backup: true
+    mode: "0755"
+  loop:
+    - ".bash_profile"
+    - ".zprofile"
+  when: coding
+    and user_user.home != ""
 
 ## Uninstall SDK ##
 
 - name: Workstation | Linux | Software | Android | Remove SDK
-  file:
+  ansible.builtin.file:
     path: "{{ android_sdk_location }}"
     state: absent
-  when: not coding == true
+  when: not coding
 
 ## User Tools ##
 #   Only needed from repo if not a development device,
 #   otherwise better versions are in the SDK.
 
 - name: Workstation | Linux | Software | Android | System Tools [Install]
-  package:
+  ansible.builtin.package:
     name:
-      - fastboot
-      - adb
+      - "{{ android_fastboot }}"
+      - "{{ android_adb }}"
     state: present
-  when: not coding == true
+  when: not coding
 
 - name: Workstation | Linux | Software | Android | System Tools [Remove]
-  package:
+  ansible.builtin.package:
     name:
-      - fastboot
-      - adb
+      - "{{ android_fastboot }}"
+      - "{{ android_adb }}"
     state: absent
-  when: coding == true
+  when: coding

tasks/workstation/linux/software/brave.yml

@@ -5,14 +5,14 @@
 # to Firefox months/years back for avoiding DRM and other junk Google stuff.
 ###
 ###- name: Workstation | Software | Brave | Pre-Reqs [apt]
-###  package:
+###  ansible.builtin.package:
 ###    name:
 ###      - apt-transport-https
 ###    state: present
 ###  when: ansible_pkg_mgr == "apt"
 ###
 ###- name: Workstation | Software | Brave | Pre-Reqs [dnf]
-###  package:
+###  ansible.builtin.package:
 ###    name:
 ###      - dnf-plugins-core
 ###    state: present
@@ -20,7 +20,7 @@
 ###
 #### https://brave.com/linux/#debian-ubuntu-mint
 ###- name: Workstation | Software | Brave | Add Repo [apt]
-###  shell: "{{ item }}"
+###  ansible.builtin.shell: "{{ item }}"
 ###  loop:
 ###    - curl -fsSLo /usr/share/keyrings/brave-browser-archive-keyring.gpg https://brave-browser-apt-release.s3.brave.com/brave-browser-archive-keyring.gpg
 ###    - echo "deb [signed-by=/usr/share/keyrings/brave-browser-archive-keyring.gpg arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main" | tee /etc/apt/sources.list.d/brave-browser-release.list
@@ -29,7 +29,7 @@
 ###
 #### https://brave.com/linux/#fedora-centos-streamrhel
 ###- name: Workstation | Software | Brave | Add Repo [dnf]
-###  shell: "{{ item }}"
+###  ansible.builtin.shell: "{{ item }}"
 ###  loop:
 ###    - dnf config-manager --add-repo https://brave-browser-rpm-release.s3.brave.com/x86_64/
 ###    - rpm --import https://brave-browser-rpm-release.s3.brave.com/brave-core.asc
@@ -37,15 +37,15 @@
 ###
 #### https://brave.com/linux/#opensuse
 ###- name: Workstation | Software | Brave | Add Repo [zypper]
-###  shell: "{{ item }}"
+###  ansible.builtin.shell: "{{ item }}"
 ###  loop:
 ###    - rpm --import https://brave-browser-rpm-release.s3.brave.com/brave-core.asc
 ###    - zypper addrepo https://brave-browser-rpm-release.s3.brave.com/brave-browser.repo
 ###  when: ansible_pkg_mgr == "zypper"
-###  ignore_errors: yes
+###  ignore_errors: true
 ###
 ###- name: Workstation | Software | Brave | Install
-###  package:
+###  ansible.builtin.package:
 ###    name:
 ###      - brave-browser
 ###    state: present
@@ -55,25 +55,25 @@
 # https://support.brave.com/hc/en-us/articles/4404876135565-How-do-I-uninstall-Brave
 
 - name: Workstation | Software | Brave | Remove
-  package:
+  ansible.builtin.package:
     name:
       - brave-browser
       - brave-keyring
     state: absent
 
 - name: Workstation | Software | Brave | Remove Repo [apt]
-  shell: rm /etc/apt/sources.list.d/brave-browser-*.list && apt update || echo "Not Needed"
+  ansible.builtin.shell: rm /etc/apt/sources.list.d/brave-browser-*.list && apt update || echo "Not Needed"
   when: ansible_pkg_mgr == "apt"
 
 - name: Workstation | Software | Brave | Remove Repo [dnf]
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - rm /etc/yum.repos.d/brave-browser-*.repo || echo "Not Needed"
     - rpm -e gpg-pubkey-c2d4e821-5e7252b8 || echo "Not Needed"
   when: ansible_pkg_mgr == "dnf"
 
 - name: Workstation | Software | Brave | Remove Repo [zypper]
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - zypper removerepo brave-browser || echo "Not Needed"
     - rpm -e gpg-pubkey-c2d4e821-5e7252b8 || echo "Not Needed"

tasks/workstation/linux/software/cinnamon.yml

@@ -0,0 +1,24 @@
+---
+# 20260716 - Hyperling
+# Begin customizing Cinnamon's dconf similar to GNOME.
+
+# Favorites are handled in .config/cinnamon/spices/group*/*.json files.
+# Does not seem as easy as GNOME and its dconf settings.
+# Cinnamon does use some dconf though.
+
+- name: Workstation | Linux | Software | Cinnamon | Facts | Defaults
+  ansible.builtin.set_fact:
+    cinnamon_package: cinnamon
+
+- name: Workstation | Linux | Software | Cinnamon | Facts | Debian Derivitives
+  ansible.builtin.set_fact:
+    cinnamon_package: task-cinnamon-desktop
+  when: ansible_distribution in ("Debian", "Devuan")
+
+- name: Workstation | Linux | Software | Cinnamon | Install
+  ansible.builtin.package:
+    name:
+      - "{{ cinnamon_package }}"
+      - "{{ lightdm }}"
+    state: present
+    update_cache: true

tasks/workstation/linux/software/flatpaks.yml

@@ -10,12 +10,16 @@
 # Then remove, autoremove, and purge flatpak executable with package manager.
 # Source: https://softhints.com/how-to-completely-remove-flatpak-linux-mint/
 
+- name: Workstation | Linux | Flatpak Distro | Flatpak | Facts
+  ansible.builtin.set_fact:
+    flatpak_extension: "-flatpak"
+
 ## Flatpak Pre-reqs ##
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Install
-  package:
+  ansible.builtin.package:
     name: flatpak
-    update_cache: yes
+    update_cache: true
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Add Flathub for System
   flatpak_remote:
@@ -27,36 +31,37 @@
 ## Flatpak Installs ##
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Variables
-  set_fact:
+  ansible.builtin.set_fact:
     flatpak_exec_dir: "{{ user_user.home }}/bin"
     flatpak_exec: "flatpak run"
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Arrays
-  set_fact:
+  ansible.builtin.set_fact:
     flatpaks_generic:
-      - { app: "org.mozilla.firefox", name: "firefox-flatpak", extra: "" }
       - { app: "io.gitlab.librewolf-community", name: "librewolf", extra: "" }
       - { app: "org.signal.Signal", name: "signal", extra: "" }
       - { app: "im.riot.Riot", name: "element", extra: "" }
-      - { app: "org.telegram.desktop", name: "telegram", extra: "" }
-      - { app: "org.gimp.GIMP", name: "gimp", extra: "" }
-      - { app: "org.libreoffice.LibreOffice", name: "office", extra: "" }
-      - { app: "com.transmissionbt.Transmission", name: "transmission", extra: "" }
+      - { app: "io.github.forkgram.tdesktop", name: "forkgram", extra: "" }
       - { app: "app.grayjay.Grayjay", name: "grayjay", extra: "" }
-      - { app: "com.github.xournalpp.xournalpp", name: "xournal", extra: "" }
+      - { app: "network.loki.Session", name: "session", extra: "" }
+      - { app: "com.brave.Browser", name: "brave", extra: "" }
+      - { app: "net.ankiweb.Anki", name: "anki", extra: "" }
+      - { app: "app.organicmaps.desktop", name: "organic-maps", extra: "" }
+      - { app: "im.dino.Dino", name: "dino", extra: "" }
     flatpaks_coding:
-      - { app: "com.vscodium.codium", name: "codium-flatpak", extra: "" }
+      - { app: "com.vscodium.codium", name: "codium", extra: "" }
       - { app: "com.google.AndroidStudio", name: "android-studio", extra: "" }
       - { app: "io.dbeaver.DBeaverCommunity", name: "dbeaver", extra: "" }
-      - { app: "com.visualstudio.code-oss", name: "code-flatpak", extra: "" }
+      - { app: "org.gnome.Boxes", name: "gnome-boxes", extra: "" }
     flatpaks_editing_video:
       - { app: "org.shotcut.Shotcut", name: "shotcut", extra: "" }
-      - { app: "com.obsproject.Studio", name: "obs", extra: "" }
+      - { app: "com.obsproject.Studio", name: "obs-studio", extra: "" }
       - { app: "org.openshot.OpenShot", name: "openshot", extra: "" }
     flatpaks_editing_audio:
       - { app: "org.tenacityaudio.Tenacity", name: "tenacity", extra: "" }
       - { app: "io.lmms.LMMS", name: "lmms", extra: "" }
       - { app: "net.sourceforge.VMPK", name: "vmpk", extra: "" }
+      - { app: "org.musicbrainz.Picard", name: "picard", extra: "" }
     flatpaks_gaming:
       - { app: "com.valvesoftware.Steam", name: "steam", extra: "" }
       - { app: "com.play0ad.zeroad", name: "zeroad", extra: "" }
@@ -78,6 +83,15 @@
       - { app: "org.rncbc.qsynth", name: "qsynth", extra: "" } # 2024-12-15, Not worth the setup, use LMMS or VMPK.
       - { app: "org.godotengine.Godot", name: "godot", extra: "" } # 2025-08-31, Stopped playing with this months / years ago. Seemed cool but Flutter is working well for this purpose.
       - { app: "chat.simplex.simplex", name: "simplex", extra: "" } # 2025-11-22, Takes a ton of space and does not work without interacting with phone.
+      - { app: "com.visualstudio.code-oss", name: "code", extra: "" } # 2026-09-29, reached end of life a few years ago.
+      # 2026-09-29, Preferring local versions of apps even if they are not as up to date. #
+      - { app: "org.mozilla.firefox", name: "firefox", extra: "" }
+      - { app: "org.gimp.GIMP", name: "gimp", extra: "" }
+      - { app: "com.transmissionbt.Transmission", name: "transmission", extra: "" }
+      - { app: "org.libreoffice.LibreOffice", name: "libreoffice", extra: "" }
+      - { app: "com.github.xournalpp.xournalpp", name: "xournal", extra: "" }
+      # End 2026-09-29 #
+      - { app: "org.telegram.desktop", name: "telegram", extra: "" } # 2026-10-02, Switching to Forkgram desktop!
 
 # Generic #
 
@@ -87,24 +101,25 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_generic }}"
-  ignore_errors: yes
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Generic | Executables
-  blockinfile:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.blockinfile:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     block: |
       {{ item.extra }} {{ flatpak_exec }} {{ item.app }}
     marker: '{mark}'
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+    mode: '0755'
   loop: "{{ flatpaks_generic }}"
+  become: true
   become_user: "{{ user }}"
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Generic | Executable Permissions
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: file
     mode: '0755'
   loop: "{{ flatpaks_generic }}"
@@ -117,30 +132,31 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
-  when: coding == true
+  when: coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Executables
-  blockinfile:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.blockinfile:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     block: |
       {{ item.extra }} {{ flatpak_exec }} {{ item.app }}
     marker: '{mark}'
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+    mode: '0755'
   loop: "{{ flatpaks_coding }}"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  when: coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Executable Permissions
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: file
     mode: '0755'
   loop: "{{ flatpaks_coding }}"
-  when: coding == true
+  when: coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Uninstall
   flatpak:
@@ -148,16 +164,14 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
-  when: not coding == true
+  when: not coding
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Coding | Remove Executables
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_coding }}"
-  ignore_errors: yes
-  when: not coding == true
+  when: not coding
 
 # Media Editors #
 
@@ -167,26 +181,27 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
   when: editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Video Editors | Executables
-  blockinfile:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.blockinfile:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     block: |
       {{ item.extra }} {{ flatpak_exec }} {{ item.app }}
     marker: '{mark}'
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+    mode: '0755'
   loop: "{{ flatpaks_editing_video }}"
+  become: true
   become_user: "{{ user }}"
   when: editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Video Editors | Executable Permissions
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: file
     mode: '0755'
   loop: "{{ flatpaks_editing_video }}"
@@ -198,15 +213,13 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
   when: not editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Video Editors | Remove Executables
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_editing_video }}"
-  ignore_errors: yes
   when: not editing in (true, "video")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio Editors | Installs
@@ -215,26 +228,27 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
   when: editing in (true, "audio")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio/Video Editors | Executables
-  blockinfile:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.blockinfile:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     block: |
       {{ item.extra }} {{ flatpak_exec }} {{ item.app }}
     marker: '{mark}'
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+    mode: '0755'
   loop: "{{ flatpaks_editing_audio }}"
+  become: true
   become_user: "{{ user }}"
   when: editing in (true, "audio")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio/Video Editors | Executable Permissions
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: file
     mode: '0755'
   loop: "{{ flatpaks_editing_audio }}"
@@ -246,15 +260,13 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
   when: not editing in (true, "audio")
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Audio/Video Editors | Remove Executables
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_editing_audio }}"
-  ignore_errors: yes
   when: not editing in (true, "audio")
 
 # Gaming #
@@ -265,30 +277,31 @@
     remote: flathub
     state: present
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
-  when: gaming == true
+  when: gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Executables
-  blockinfile:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.blockinfile:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     block: |
       {{ item.extra }} {{ flatpak_exec }} {{ item.app }}
     marker: '{mark}'
     marker_begin: "#!{{ bash_exec.stdout }}"
     marker_end: "exit 0"
     state: present
-    create: yes
+    create: true
+    mode: '0755'
   loop: "{{ flatpaks_gaming }}"
+  become: true
   become_user: "{{ user }}"
-  when: gaming == true
+  when: gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Executable Permissions
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: file
     mode: '0755'
   loop: "{{ flatpaks_gaming }}"
-  when: gaming == true
+  when: gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Uninstalls
   flatpak:
@@ -296,16 +309,14 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
-  when: not gaming == true
+  when: not gaming
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Gaming | Remove Executables
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_gaming }}"
-  ignore_errors: yes
-  when: not gaming == true
+  when: not gaming
 
 # Removals #
 
@@ -315,11 +326,9 @@
     remote: flathub
     state: absent
   loop: "{{ flatpaks_remove }}"
-  ignore_errors: yes
 
 - name: Workstation | Linux | Flatpak Distro | Flatpak | Uninstalls | Remove Executables
-  file:
-    path: "{{ flatpak_exec_dir }}/{{ item.name }}"
+  ansible.builtin.file:
+    path: "{{ flatpak_exec_dir }}/{{ item.name }}{{ flatpak_extension }}"
     state: absent
   loop: "{{ flatpaks_remove }}"
-  ignore_errors: yes

tasks/workstation/linux/software/flutter.yml

@@ -3,175 +3,196 @@
 
 ## Facts ##
 
-- name: Workstation | Linux | Software | Flutter | Facts [1/4]
-  set_fact:
-    flutter_url: "https://storage.googleapis.com/flutter_infra_release/releases/stable/linux/flutter_linux_3.27.2-stable.tar.xz"
+- name: Workstation | Linux | Software | Flutter | Facts 1
+  ansible.builtin.set_fact:
+    flutter_url: "https://storage.googleapis.com/flutter_infra_release/releases/stable/linux/flutter_linux_3.47.4-stable.tar.xz"
     flutter_download_file: "{{ user_user.home }}/Downloads/flutter.tar.xz"
     flutter_sdk_location: "{{ user_user.home }}/SDKs/Flutter"
     flutter_report: "{{ user_user.home }}/Reports/{{ ansible_hostname }}.sdk.flutter.txt"
-  when: coding == true
 
-- name: Workstation | Linux | Software | Flutter | Facts [2/4]
-  set_fact:
+- name: Workstation | Linux | Software | Flutter | Facts 2
+  ansible.builtin.set_fact:
     flutter_bin_location: "{{ flutter_sdk_location }}/flutter/bin"
-  when: coding == true
 
-- name: Workstation | Linux | Software | Flutter | Facts [3/4]
-  set_fact:
+- name: Workstation | Linux | Software | Flutter | Facts 3
+  ansible.builtin.set_fact:
     flutter: "{{ flutter_bin_location }}/flutter"
-  when: coding == true
 
-- name: Workstation | Linux | Software | Flutter | Facts [3/3]
-  set_fact:
+- name: Workstation | Linux | Software | Flutter | Facts 4
+  ansible.builtin.set_fact:
     flutter_report_commands:
       - "date > {{ flutter_report }}"
       - "{{ flutter }} --disable-analytics >> {{ flutter_report }}"
       - "date >> {{ flutter_report }}"
       - "{{ flutter }} doctor -v >> {{ flutter_report }}"
       - "date >> {{ flutter_report }}"
-  when: coding == true
 
 ## Checks ##
 
 - name: Workstation | Linux | Software | Flutter | Check SDK Exists
-  stat:
+  ansible.builtin.stat:
     path: "{{ flutter_sdk_location }}"
     get_attributes: false
     get_checksum: false
     get_mime: false
   register: flutter_sdk_stat
-  when: coding == true
 
 - name: Workstation | Linux | Software | Flutter | Check Download Exists
-  stat:
+  ansible.builtin.stat:
     path: "{{ flutter_download_file }}"
     get_attributes: false
     get_checksum: false
     get_mime: false
   register: flutter_download_stat
-  when: coding == true
 
 ## Packages ##
 
 - name: Workstation | Linux | Software | Flutter | Necessities
-  package:
+  ansible.builtin.package:
     name:
-    - curl
-    - git
-    - unzip
-    - xz-utils
-    - zip
-    - libglu1-mesa
+      - curl
+      - git
+      - unzip
+      - "{{ xz }}"
+      - zip
+      - "{{ mesa }}"
+      - "{{ mesa_utils }}"
     state: present
-  when: coding == true
+  when: coding
 
 # https://docs.flutter.dev/get-started/install/linux/desktop
 - name: Workstation | Linux | Software | Flutter | Linux App Dependencies
-  package:
+  ansible.builtin.package:
     name:
-    - clang
-    - cmake
-    - git
-    - ninja-build
-    - pkg-config
-    - libgtk-3-dev
-    - liblzma-dev
-    - libstdc++-12-dev
+      - clang
+      - cmake
+      - git
+      - "{{ ninja }}"
+      - pkg-config
+      - "{{ gtk3 }}"
+      - "{{ xz_libs }}"
+      - "{{ cpp }}"
     state: present
-  when: coding == true
+  when: coding
 
 # https://docs.flutter.dev/get-started/install/linux/android
 - name: Workstation | Linux | Software | Flutter | Android App Dependencies
-  package:
+  ansible.builtin.package:
     name:
-      - libc6:amd64
-      - libstdc++6
-      - lib32z1
-      - libbz2-1.0
+      - "{{ c_libs }}"
+      - "{{ cpp_libs }}"
+      - "{{ z_libs }}"
+      - "{{ bzip }}"
     state: present
-  when: coding == true
+  when: coding
 
 ## Install SDK ##
 
 - name: Workstation | Linux | Software | Flutter | SDK
   block:
 
-  - name: Workstation | Linux | Software | Flutter | Download SDK
-    get_url:
-      url: "{{ flutter_url }}"
-      dest: "{{ flutter_download_file }}"
-      owner: "{{ user }}"
-      group: "{{ user }}"
-      mode: '0664'
-    when: not flutter_download_stat.stat.exists
+    - name: Workstation | Linux | Software | Flutter | Download SDK
+      ansible.builtin.get_url:
+        url: "{{ flutter_url }}"
+        dest: "{{ flutter_download_file }}"
+        owner: "{{ user }}"
+        group: "{{ user }}"
+        mode: '0664'
+      when: not flutter_download_stat.stat.exists
 
-  - name: Workstation | Linux | Software | Flutter | Create Folder
-    file:
-      path: "{{ flutter_sdk_location }}"
-      state: directory
-      owner: "{{ user }}"
-      group: "{{ user }}"
-      mode: '0755'
+    - name: Workstation | Linux | Software | Flutter | Create Folder
+      ansible.builtin.file:
+        path: "{{ flutter_sdk_location }}"
+        state: directory
+        owner: "{{ user }}"
+        group: "{{ user }}"
+        mode: '0755'
 
-  - name: Workstation | Linux | Software | Flutter | Extract SDK
-    unarchive:
-      src: "{{ flutter_download_file }}"
-      dest: "{{ flutter_sdk_location }}"
-      owner: "{{ user }}"
-      group: "{{ user }}"
+    - name: Workstation | Linux | Software | Flutter | Extract SDK
+      ansible.builtin.unarchive:
+        src: "{{ flutter_download_file }}"
+        dest: "{{ flutter_sdk_location }}"
+        owner: "{{ user }}"
+        group: "{{ user }}"
 
+  become: true
   become_user: "{{ user }}"
-  when: coding == true and not flutter_sdk_stat.stat.exists
+  when: coding
+    and not flutter_sdk_stat.stat.exists
 
 - name: Workstation | Linux | Software | Flutter | Delete Archive
-  file:
+  ansible.builtin.file:
     path: "{{ flutter_download_file }}"
     state: absent
+  when: coding
 
 ## Configure Environment ##
 
 - name: Workstation | Linux | Software | Flutter | Modify PATH (.bashrc)
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.bashrc"
     block: |
       export PATH="$PATH:{{ flutter_bin_location }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Flutter'
-    state: present
-    create: yes
-    backup: yes
+    state: absent
+    create: true
+    backup: true
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
-  when: coding == true and user_root.home != "" and user_user.home != ""
+  when: coding
+    and user_root.home != ""
+    and user_user.home != ""
 
 - name: Workstation | Linux | Software | Flutter | Modify PATH (.zshrc)
-  blockinfile:
+  ansible.builtin.blockinfile:
     path: "{{ item }}/.zshrc"
     block: |
       export PATH="$PATH:{{ flutter_bin_location }}"
     marker: '# {mark} MANAGED BY ANSIBLE | Flutter'
-    state: present
-    create: yes
-    backup: yes
+    state: absent
+    create: true
+    backup: true
+    mode: "0755"
   loop:
     - "{{ user_root.home }}"
     - "{{ user_user.home }}"
-  ignore_errors: yes
-  when: coding == true and user_root.home != "" and user_user.home != ""
+  when: coding
+    and user_root.home != ""
+    and user_user.home != ""
+
+- name: Workstation | Linux | Software | Flutter | Modify PATH (profiles)
+  ansible.builtin.blockinfile:
+    path: "{{ user_user.home }}/{{ item }}"
+    block: |
+      export PATH="$PATH:{{ flutter_bin_location }}"
+    marker: '# {mark} MANAGED BY ANSIBLE | Flutter'
+    state: present
+    create: true
+    backup: true
+    mode: "0755"
+  loop:
+    - ".bash_profile"
+    - ".zprofile"
+  when: coding
+    and user_user.home != ""
 
 ## Test SDK ##
 
 - name: Workstation | Linux | Software | Flutter | Doctor Report
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop: "{{ flutter_report_commands }}"
+  become: true
   become_user: "{{ user }}"
-  when: coding == true
+  register: shell_check
+  changed_when: shell_check.rc == 0
+  when: coding
 
 ## Uninstall SDK ##
 
 - name: Workstation | Linux | Software | Flutter | Remove SDK
-  file:
+  ansible.builtin.file:
     path: "{{ flutter_sdk_location }}"
     state: absent
-  when: not coding == true
+  when: not coding

tasks/workstation/linux/software/gnome.yml

@@ -1,24 +1,24 @@
 # Some Linux distros come with meh DE's, this fixes that.
 
 - name: Workstation | Linux | Software | GNOME | Check (Parrot OS Only)
-  shell: which gdm3
+  ansible.builtin.shell: which gdm3
   register: gnome_install
   when: ansible_distribution in ("Parrot OS")
   ignore_errors: true
 
 - name: Workstation | Linux | Software | GNOME | Install
-  package:
-    name: 
-      - gnome 
+  ansible.builtin.package:
+    name:
+      - gnome
       - gdm3
     state: present
   when: gnome_install is defined and gnome_install.failed is defined and gnome_install.failed
 
 - name: Workstation | Linux | Software | GNOME | Note Before Exiting
-  debug:
+  ansible.builtin.debug:
     msg: "You will need to run `dpkg-reconfigure gdm3` to ensure gdm3 is selected."
   when: gnome_install is defined and gnome_install.failed is defined and gnome_install.failed
 
 - name: Workstation | Linux | Software | GNOME | Exiting
-  shell: exit 1
+  ansible.builtin.shell: exit 1
   when: gnome_install is defined and gnome_install.failed is defined and gnome_install.failed

tasks/workstation/linux/software/hugo.yml

@@ -0,0 +1,56 @@
+---
+# 2026-09-11 Hyperling
+# Move all Hugo development needs to a specific place.
+
+- name: Workstation | Linux | Software | Hugo
+  block:
+
+  - name: Workstation | Linux | Software | Hugo | pacman
+    block:
+
+    - name: Workstation | Linux | Software | Hugo | pacman | Facts
+      ansible.builtin.set_fact:
+        sass_old: ruby-sass
+        sass_current: dart-sass
+
+    - name: Workstation | Linux | Software | Hugo | pacman | Remove Old
+      ansible.builtin.package:
+        name:
+          - "{{ sass_old }}"
+        state: absent
+
+    - name: Workstation | Linux | Software | Hugo | pacman | Install New
+      ansible.builtin.package:
+        name:
+          - "{{ sass_current }}"
+        state: present
+
+    when: ansible_pkg_mgr == "pacman"
+
+  # This must exist after nodejs.yml so that NPM is installed.
+  - name: Workstation | Linux | Software | Hugo | npm
+    block:
+
+    - name: Workstation | Linux | Software | Hugo | npm | Facts
+      ansible.builtin.set_fact:
+        sass_old: node-sass
+        sass_current: sass
+
+    - name: Workstation | Linux | Software | Hugo | npm | Gather
+      ansible.builtin.shell: npm prefix -g
+      register: npm_bin_dir # Provides /usr/local/ on Devuan, /usr/ on Artix.
+      changed_when: false
+
+    - name: Workstation | Linux | Software | Hugo | npm | Remove Old
+      ansible.builtin.shell: "npm remove -g {{ sass_old }}"
+      args:
+        creates: "{{ npm_bin_dir.stdout }}/bin/sass"
+
+    - name: Workstation | Linux | Software | Hugo | npm | Install New
+      ansible.builtin.shell: "npm install -g {{ sass_current }}"
+      args:
+        creates: "{{ npm_bin_dir.stdout }}/bin/sass"
+
+    when: ansible_pkg_mgr == "apt"
+
+  when: coding is true

tasks/workstation/linux/software/java.yml

@@ -0,0 +1,35 @@
+---
+# 20260912 - Hyperling
+# Arch has too new of Java for Android / Gradle to even run AGP Assistant on.
+
+- name: Workstation | Linux | Software | Java | pacman
+  block:
+
+  - name: Workstation | Linux | Software | Java | pacman | Facts
+    ansible.builtin.set_fact:
+      jdk_version: 21
+      jdk_dir: ~/SDKs/Java
+
+  - name: Workstation | Linux | Software | Java | pacman | Install
+    ansible.builtin.package:
+      name:
+        - "jdk{{ item }}-openjdk"
+      state: present
+    loop:
+      - "{{ jdk_version }}"
+      - 25
+      - 21
+      - 17
+
+  - name: Workstation | Linux | Software | Java | pacman | Set
+    ansible.builtin.shell: "archlinux-java set java-{{ jdk_version }}-openjdk"
+
+  - name: Workstation | Linux | Software | Java | pacman | Link
+    ansible.builtin.shell: "ln -sf /usr/lib/jvm {{ jdk_dir }}"
+    args:
+      creates: "{{ jdk_dir }}"
+    become: true
+    become_user: "{{ user }}"
+
+  when: coding is true
+    and ansible_pkg_mgr == "pacman"

tasks/workstation/linux/software/llm.yml

@@ -0,0 +1,440 @@
+---
+# 2026-10-05 Hyperling
+# Install a local LLM for use offline.
+#   - https://zeroclaw.net/blog/install-zeroclaw
+#   - https://zeroclaw.net/blog/set-up-zeroclaw-bot-ollama-telegram
+#
+# Packages Details
+#   - https://archlinux.org/packages/extra/x86_64/zeroclaw/
+#   - https://archlinux.org/packages/extra/x86_64/ollama/
+#
+# Individual Guides
+#   - https://github.com/zeroclaw-labs/zeroclaw
+#   - https://wiki.archlinux.org/title/Ollama
+#
+# Model Explanations
+#   - https://webscraft.org/blog/ollama-na-8-gb-ram-yaki-modeli-pratsyuyut-u-2026?lang=en
+#
+# Models
+#   - https://ollama.com/search
+#
+# References
+#   - https://docs.zeroclaw.com/master/en/reference/config.html
+#   - https://docs.ollama.com
+
+# Currently only testing this on Arch based distros (pacman).
+- name: Workstation | Linux | Software | LLMs
+  block:
+
+    - name: Workstation | Linux | Software | LLMs | Facts 01
+      ansible.builtin.set_fact:
+        ollama: ollama
+        zeroclaw: zeroclaw
+        zerocode: zerocode
+        qwen_code: qwen-code
+        # Good to keep low to prevent swap usage.
+        llm_concurrency: "{{ (ansible_memtotal_mb / 64000) | round(0, method='ceil') | int }}"
+        # Allow having multiple chats open without them just waiting each other.
+        llm_parallel: "{{ (ansible_processor_vcpus / 8) | round(0, method='ceil') | int }}"
+        # Most LLMs take a coefficient of about 1.2 to 1.5 of their file size in
+        #    RAM, which is usually less than guessing a usage of weight*1000.
+        # Example:
+        #   - qwen3.5:9b would be 6.6GB * 1.3 = 8580, rather than 9000.
+        # Conversely:
+        #   - qwen3.5:4b would be 3.3GB * 1.3 = 4290, rather than 4000.
+        llm_size_coef: 1.3
+        # Take the GB of RAM and use it as the MB of context.
+        llm_context: "{{ ansible_memtotal_mb | int }}"
+
+    - name: Workstation | Linux | Software | LLMs | Facts 02
+      ansible.builtin.set_fact:
+        ollama_runit_dir: "{{ runit_script_dir }}/{{ ollama }}"
+        ollama_runit_log_dest: "{{ global_log }}/{{ ollama }}"
+        zeroclaw_runit_dir: "{{ runit_script_dir }}/{{ zeroclaw }}"
+        zeroclaw_runit_log_dest: "{{ global_log }}/{{ zeroclaw }}"
+
+    - name: Workstation | Linux | Software | LLMs | Facts 03
+      ansible.builtin.set_fact:
+        ollama_runit_script: "{{ ollama_runit_dir }}/{{ runit_service_script }}"
+        ollama_runit_log_dir: "{{ ollama_runit_dir }}/{{ runit_log_dir }}"
+        ollama_runit_log_config: "{{ ollama_runit_log_dest }}/{{ global_log_config }}"
+        zeroclaw_runit_script: "{{ zeroclaw_runit_dir }}/{{ runit_service_script }}"
+        zeroclaw_runit_log_dir: "{{ zeroclaw_runit_dir }}/{{ runit_log_dir }}"
+        zeroclaw_runit_log_config: "{{ zeroclaw_runit_log_dest }}/{{ global_log_config }}"
+
+    - name: Workstation | Linux | Software | LLMs | Facts 04
+      ansible.builtin.set_fact:
+        ollama_runit_log_script: "{{ ollama_runit_log_dir }}/{{ runit_log_script }}"
+        zeroclaw_runit_log_script: "{{ zeroclaw_runit_log_dir }}/{{ runit_log_script }}"
+
+    - name: Workstation | Linux | Software | LLMs | Facts | LLMs
+      ansible.builtin.set_fact:
+        llm_installs: []
+        llm_removals:
+          - { "model": "qwen3:4b", "provider": "qwen_30_0040", "size_mb": 4000 }
+          - { "model": "qwen3.6:27b", "provider": "qwen_36_0270", "size_mb": 27000 }
+          - { "model": "qwen3.5:27b", "provider": "qwen_35_0270", "size_mb": "{{ llm_size_coef * 17000 }}" }
+        llm_choices:
+            ### QWEN >3.5 - Need to try!
+          - { "model": "qwen3.8:27b", "provider": "qwen_38_0270", "size_mb": 27000 }
+          - { "model": "qwen3.6:35b", "provider": "qwen_36_0350", "size_mb": 35000 }
+            ### QWEN 3.5 - Good for generic usage and a little coding.
+          - { "model": "qwen3.5:0.8b", "provider": "qwen_35_0008", "size_mb": "{{ llm_size_coef *  1200 }}" }
+          - { "model": "qwen3.5:2b",   "provider": "qwen_35_0020", "size_mb": "{{ llm_size_coef *  2700 }}" }
+          - { "model": "qwen3.5:4b",   "provider": "qwen_35_0040", "size_mb": "{{ llm_size_coef *  3300 }}" }
+          - { "model": "qwen3.5:9b",   "provider": "qwen_35_0090", "size_mb": "{{ llm_size_coef *  6600 }}" }
+              # skip 27b and use 35b
+          - { "model": "qwen3.5:35b",  "provider": "qwen_35_0350", "size_mb": "{{ llm_size_coef * 22000 }}" }
+          - { "model": "qwen3.5:122b", "provider": "qwen_35_1220", "size_mb": "{{ llm_size_coef * 81000 }}" }
+            ### QWEN 3.0 Coder - Supposed to be better than 2.5 for machines that can handle it.
+          - { "model": "qwen3-coder:30b",  "provider": "qwen_30_coder_0300", "size_mb": "{{ llm_size_coef *  19000 }}" }
+          - { "model": "qwen3-coder:420b", "provider": "qwen_30_coder_4200", "size_mb": "{{ llm_size_coef * 290000 }}" }
+            ### QWEN 2.5 Coder - Ol'reliable!
+          - { "model": "qwen2.5-coder:0.5b", "provider": "qwen_25_coder_0005", "size_mb": "{{ llm_size_coef *   398 }}" }
+          - { "model": "qwen2.5-coder:1.5b", "provider": "qwen_25_coder_0015", "size_mb": "{{ llm_size_coef *   986 }}" }
+          - { "model": "qwen2.5-coder:3b",   "provider": "qwen_25_coder_0030", "size_mb": "{{ llm_size_coef *  1900 }}" }
+          - { "model": "qwen2.5-coder:7b",   "provider": "qwen_25_coder_0070", "size_mb": "{{ llm_size_coef *  4700 }}" }
+          - { "model": "qwen2.5-coder:14b",  "provider": "qwen_25_coder_0140", "size_mb": "{{ llm_size_coef *  9000 }}" }
+          - { "model": "qwen2.5-coder:32b",  "provider": "qwen_25_coder_0320", "size_mb": "{{ llm_size_coef * 20000 }}" }
+            ### Mistral, Ministral, and Devstral - By a French company?
+          - { "model": "devstral-small-2:24b", "provider": "devstral_20_0240_small", "size_mb": 24000 }
+          #- mistral:7b
+          #- ministral-3:3b
+          #- ministral-3:8b
+          #- ministral-3:14b
+          ##### TBD #####
+          ### QWEN 2.5 - Older, but does not have "thinking", tempting!
+          #- qwen2.5:0.5b
+          #- qwen2.5:1.5b
+          #- qwen2.5:3b
+          #- qwen2.5:7b
+          #- qwen2.5:14b
+          #- qwen2.5:32b
+          #- qwen2.5:72b
+          ### Z.ai
+          #- GLM-5.x
+          #- glm4-flash
+          ### Others
+          #- deepseek-r1:1.5b
+          #- deepseek-r1:7b
+
+    - name: Workstation | Linux | Software | LLMs | Facts | Merge | Print
+      ansible.builtin.debug:
+        var: "{{ item }}"
+      loop:
+        - ansible_processor_vcpus
+        - ansible_memtotal_mb
+        - llm_concurrency
+        - llm_parallel
+        - llm_installs
+        - llm_removals
+        - llm_choices
+
+    - name: Workstation | Linux | Software | LLMs | Facts | Choices | Sort
+      ansible.builtin.set_fact:
+        llm_installs: >-
+          {{ llm_choices | selectattr('size_mb', 'le', ansible_memtotal_mb) | list }}
+        llm_removals: >-
+          {{ llm_choices | selectattr('size_mb', 'gt', ansible_memtotal_mb) | list }}
+
+    - name: Workstation | Linux | Software | LLMs | Facts | Merge | Print
+      ansible.builtin.debug:
+        var: "{{ item }}"
+      loop:
+        - llm_installs
+        - llm_removals
+
+    - name: Workstation | Linux | Software | LLMs | Packages | Install
+      ansible.builtin.package:
+        name:
+          - "{{ zeroclaw }}"
+          - "{{ ollama }}"
+          - "{{ zerocode }}"
+          - "{{ qwen_code }}"
+        state: present
+
+    - name: Workstation | Linux | Software | LLMs | runit
+      block:
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Dir | Run
+          ansible.builtin.file:
+            name: "{{ ollama_runit_dir }}"
+            state: directory
+            owner: root
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Dir | Log Run
+          ansible.builtin.file:
+            name: "{{ ollama_runit_log_dir }}"
+            state: directory
+            owner: root
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Dir | Log Config
+          ansible.builtin.file:
+            name: "{{ ollama_runit_log_dest }}"
+            state: directory
+            owner: "{{ user }}"
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Script | Run
+          ansible.builtin.copy:
+            dest: "{{ ollama_runit_script }}"
+            content: |
+              #!/bin/sh -e
+              # Allow pulling LLMs for use with ZeroClaw.
+              exec 2>&1
+              export HOME={{ user_user.home }}
+              # Timeouts #
+              export OLLAMA_LOAD_TIMEOUT=20m # default is 5m
+              export OLLAMA_REQUEST_TIMEOUT=3600 # default 300 (unconfirmed, not in the list of --help vars)
+              # Resource Usage #
+              export OLLAMA_KEEP_ALIVE=20m # default is 5m
+              export OLLAMA_MAX_LOADED_MODELS={{ llm_concurrency }} # default is 3 if using CPUs, or 3 * NumGPUs
+              export OLLAMA_NUM_PARALLEL={{ llm_parallel }} # default is 1 and applies per-model (unconfirmed)
+              export OLLAMA_CONTEXT_LENGTH={{ llm_context }} # default is 4096, https://docs.ollama.com/faq#how-can-i-specify-the-context-window-size
+              export OLLAMA_MAX_QUEUE=999 # default is 512 (unconfirmed)
+              exec chpst -u {{ user }} ollama serve
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Script | Log
+          ansible.builtin.copy:
+            dest: "{{ ollama_runit_log_script }}"
+            content: |
+              #!/bin/sh -e
+              exec svlogd -tt {{ ollama_runit_log_dest }}
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | ollama | Script | Log Config
+          ansible.builtin.copy:
+            dest: "{{ ollama_runit_log_config }}"
+            content: |
+              s10000000                    # rotate at 10 MB
+              n5                           # keep 5 old files
+              dateformat %Y-%m-%d_%H-%M-%S # each run gets its own file.
+            owner: "{{ user }}"
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Dir | Run
+          ansible.builtin.file:
+            name: "{{ zeroclaw_runit_dir }}"
+            state: directory
+            owner: root
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Dir | Log
+          ansible.builtin.file:
+            name: "{{ zeroclaw_runit_log_dir }}"
+            state: directory
+            owner: root
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Dir | Log Config
+          ansible.builtin.file:
+            name: "{{ zeroclaw_runit_log_dest }}"
+            state: directory
+            owner: "{{ user }}"
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Script | File
+          ansible.builtin.copy:
+            dest: "{{ zeroclaw_runit_script }}"
+            content: |
+              #!/bin/sh -e
+              # Allow using the ZeroClaw frontend.
+              exec 2>&1
+              export HOME={{ user_user.home }}
+              export SHELL={{ bash_exec.stdout }}
+              exec chpst -u {{ user }} zeroclaw daemon -v --log-level info
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Script | Log
+          ansible.builtin.copy:
+            dest: "{{ zeroclaw_runit_log_script }}"
+            content: |
+              #!/bin/sh -e
+              exec svlogd -tt {{ zeroclaw_runit_log_dest }}
+            mode: "0755"
+
+        - name: Workstation | Linux | Software | LLMs | runit | zeroclaw | Script | Log Config
+          ansible.builtin.copy:
+            dest: "{{ zeroclaw_runit_log_config }}"
+            content: |
+              s1000000                     # rotate at 1 MB
+              n5                           # keep 5 old files
+              dateformat %Y-%m-%d_%H-%M-%S # each run gets its own file.
+            mode: "0755"
+
+      when: ansible_service_mgr == "runit"
+
+    - name: Workstation | Linux | Software | LLMs | Services | Enable
+      ansible.builtin.service:
+        name: "{{ item }}"
+        state: started
+        enabled: true
+      loop:
+        - "{{ ollama }}"
+        - "{{ zeroclaw }}"
+
+    - name: Workstation | Linux | Software | LLMs | Services | Verify
+      ansible.builtin.uri:
+        url: "{{ item }}"
+        status_code: 200
+        timeout: 5
+      register: health
+      until: health.status == 200
+      retries: 12
+      delay: 5
+      loop:
+        - http://127.0.0.1:11434/
+        - http://127.0.0.1:42617/health
+
+    #- name: Workstation | Linux | Software | LLMs | Config | zeroclaw | Root
+    #  ansible.builtin.blockinfile:
+    #    path: "{{ user_user.home }}/.zeroclaw/config.toml"
+    #    marker: "# {mark} ANSIBLE MANAGED BLOCK | zeroclaw | Defaults"
+    #    insertbefore: '(?m)^schema_version'
+    #    block: |
+    #      default_provider = "ollama"
+    #      default_model = "qwen3.5:4b"
+    #      provider_timeout_secs = 3600
+    #    state: present
+    #    create: false
+    #    backup: true
+
+    #- name: Workstation | Linux | Software | LLMs | Config | zeroclaw | Channels | header
+    #  ansible.builtin.lineinfile:
+    #    path: "{{ user_user.home }}/.zeroclaw/config.toml"
+    #    insertbefore: '(?m)^[channels]'
+    #    block: |
+    #      message_timeout_secs = 3600
+    #    state: present
+    #    create: false
+    #    backup: true
+
+    #- name: Workstation | Linux | Software | LLMs | Config | zeroclaw | Channels
+    #  ansible.builtin.blockinfile:
+    #    path: "{{ user_user.home }}/.zeroclaw/config.toml"
+    #    marker: "# {mark} ANSIBLE MANAGED BLOCK | zeroclaw | Channels"
+    #    insertbefore: '(?m)^[channels]'
+    #    block: |
+    #      message_timeout_secs = 3600
+    #    state: present
+    #    create: false
+    #    backup: true
+
+
+    - name: Workstation | Linux | Software | LLMs | Models | ollama | Manual Script
+      ansible.builtin.blockinfile:
+        path: "{{ user_user.home }}/{{ item }}"
+        marker: "# {mark} ANSIBLE MANAGED BLOCK | ollama | Manual Script"
+        content: |
+          function pull_llms() {
+            echo "Manually Pulling Models"
+            {% for llm in llm_installs %}
+
+            echo -e "\n\n Starting {{ llm.model }} \n\n"
+            ollama pull {{ llm.model }} || {
+              status=$?
+              echo "ERROR: Pull failed with status $status, exiting."
+              exit $status
+            }
+            {% endfor %}
+            echo "Done!!"
+          }
+          alias pull-llms="pull_llms "
+          alias pull-models="pull_llms "
+          alias pull-ai="pull_llms "
+        state: present
+        create: false
+        backup: true
+      loop:
+        - .bashrc
+        - .zshrc
+
+    - name: Workstation | Linux | Software | LLMs | Models | ollama | Manual Script | Message
+      ansible.builtin.debug:
+        msg: |
+          The next task may take hours, if not days. if you'd a status bar,
+          I highly recommed reloading your RC file and running `pull-models`.
+          That will give you a much better idea of what's going on.
+
+    - name: Workstation | Linux | Software | LLMs | Models | ollama | Install
+      ansible.builtin.shell: |
+        set -o pipefail
+        item='{{ item.model }}'
+        if ollama list | grep -q $item; then
+          echo "OKAY" &&
+            return
+        else
+          ollama pull $item 1>/dev/null &&
+            echo "INSTALLED" &&
+            return
+        fi
+        echo "FAILED"
+      loop: "{{ llm_installs }}"
+      register: shell_check
+      changed_when: "'INSTALLED' in shell_check.stdout"
+      failed_when: "'FAILED' in shell_check.stdout"
+      become: true
+      become_user: "{{ user }}"
+      when: llm_installs | length > 0
+
+    - name: Workstation | Linux | Software | LLMs | Models | ollama | Remove
+      ansible.builtin.shell: |
+        set -o pipefail
+        item='{{ item.model }}'
+        if ollama list | grep -q $item; then
+          ollama rm $item &&
+            echo "INSTALLED" &&
+            return
+        else
+          echo "OKAY" &&
+            return
+        fi
+        echo "FAILED"
+      loop: "{{ llm_removals }}"
+      register: shell_check
+      changed_when: "'INSTALLED' in shell_check.stdout"
+      failed_when: "'FAILED' in shell_check.stdout"
+      become: true
+      become_user: "{{ user }}"
+      when: llm_removals | length > 0
+
+    # Cheat Sheet: https://docs.zeroclaw.com/master/en/providers/configuration.html
+    - name: Workstation | Linux | Software | LLMs | Models | zeroclaw | Add Providers
+      ansible.builtin.blockinfile:
+        path: "{{ user_user.home }}/.zeroclaw/config.toml"
+        marker: "# {mark} ANSIBLE MANAGED BLOCK | zeroclaw | Providers"
+        insertafter: EOF
+        block: |
+          {% for llm in llm_installs %}
+          [providers.models.ollama.{{ llm.provider }}]
+          model = "{{ llm.model }}"
+          timeout_secs = 3600 # 1 hour, default is 120 (2 minutes), issue happens between 5 and 6 minutes though.
+          context_window = {{ llm_context }}
+          {% endfor %}
+        state: present
+        create: false
+        backup: true
+
+    - name: Workstation | Linux | Software | LLMs | Models | Continue | Config
+      ansible.builtin.copy:
+        dest: "{{ user_user.home }}/.continue/config.yml"
+        content: |
+          # Maintained by `env-ansible/tasks/workstation/linux/software/llm.yml`
+          name: Main Config
+          version: 1.0.0
+          schema: v1
+          models:
+            {% for llm in llm_installs %}
+            - name: {{ llm.provider }}
+              provider: ollama
+              model: {{ llm.model }}
+              defaultCompletionOptions:
+                contextLength: {{ llm_context }}
+                maxTokens: {{ llm_context }}
+            {% endfor %}
+        mode: "0644"
+
+  when: ansible_pkg_mgr == "pacman"

tasks/workstation/linux/software/lutris.yml

@@ -2,10 +2,21 @@
 # Lutris for running Windows games not in Steam.
 #   https://lutris.net/downloads
 
+## Starcraft 2 ##
+# 2026-05-06: #
+# Using "System (10.0 (Debian 10.0-repack-6))" works, not Proton.
+#  - Fails to actually open SC2, but Battle.net worss great, lol.
+# does not get to login, pop-up freezes
+# - wine 8
+# - proton hotfix
+# - proton exp
+# - proton GE stabele / default
+# - proton 9 (beta)
+
 # Paths
 
 - name: Workstation | Linux | Software | Lutris | Facts
-  set_fact:
+  ansible.builtin.set_fact:
     lutris_source_list: "/etc/apt/sources.list.d/lutris.list"
     lutris_keyfile: "/usr/share/keyrings/lutris.gpg"
   when: ansible_pkg_mgr == "apt"
@@ -13,7 +24,7 @@
 # Checks
 
 - name: Workstation | Linux | Software | Lutris | Check PPA
-  stat:
+  ansible.builtin.stat:
     path: "{{ lutris_source_list }}"
     get_attributes: false
     get_checksum: false
@@ -26,54 +37,54 @@
 - name: Workstation | Linux | Software | Lutris | Add PPA (Ubuntu)
   apt_repository:
     repo: ppa:lutris-team/lutris
-    update_cache: yes
+    update_cache: true
     state: present
-  when: ansible_distribution in ("Ubuntu") and gaming == true
-  ignore_errors: yes
+  when: ansible_distribution in ("Ubuntu") and gaming
+  ignore_errors: true
 
 - name: Workstation | Linux | Software | Lutris | Add PPA (Debian)
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
-    - "wget -q -O- https://download.opensuse.org/repositories/home:/strycore/Debian_12/Release.key \
+    - "wget -q -O- https://download.opensuse.org/repositories/home:/strycore/Debian_13/Release.key \
       | gpg --dearmor \
       | sudo tee {{ lutris_keyfile }} > /dev/null"
-    - "echo 'deb [signed-by={{ lutris_keyfile }}] https://download.opensuse.org/repositories/home:/strycore/Debian_12/ ./' \
+    - "echo 'deb [signed-by={{ lutris_keyfile }}] https://download.opensuse.org/repositories/home:/strycore/Debian_13/ ./' \
       | sudo tee {{ lutris_source_list }} > /dev/null"
     - "sudo apt update"
-  when: ansible_distribution in ("Debian") and gaming == true and not lutris_source_exists.stat.exists
+  when: ansible_distribution in ("Debian") and gaming and not lutris_source_exists.stat.exists
 
 ## Install Package ##
 
 - name: Workstation | Linux | Software | Lutris | Install (besides ARM)
-  package:
+  ansible.builtin.package:
     name:
       - lutris
     state: present
-  when: ansible_architecture != "aarch64" and gaming == true
+  when: ansible_architecture != "aarch64" and gaming
 
 ## Uninstall Package ##
 
 - name: Workstation | Linux | Software | Lutris | Uninstall (besides ARM)
-  package:
+  ansible.builtin.package:
     name:
       - lutris
     state: absent
-  when: ansible_architecture != "aarch64" and gaming != true
+  when: ansible_architecture != "aarch64" and not gaming
 
 ## Uninstall Repo ##
 
 - name: Workstation | Linux | Software | Lutris | Remove PPA (Ubuntu)
   apt_repository:
     repo: ppa:lutris-team/lutris
-    update_cache: yes
+    update_cache: true
     state: absent
-  when: ansible_distribution in ("Ubuntu") and gaming != true
-  ignore_errors: yes
+  when: ansible_distribution in ("Ubuntu") and not gaming
+  ignore_errors: true
 
 - name: Workstation | Linux | Software | Lutris | Remove PPA (Debian)
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "mv {{ lutris_source_list }} ~/TRASH/"
     - "mv {{ lutris_keyfile }} ~/TRASH/"
     - "sudo apt update"
-  when: ansible_distribution in ("Debian") and gaming != true and lutris_source_exists.stat.exists
+  when: ansible_distribution in ("Debian") and not gaming and lutris_source_exists.stat.exists

tasks/workstation/linux/software/lxqt.yml

@@ -0,0 +1,20 @@
+---
+# 20260716 - Hyperling
+# Giving this DE a shot but not liking it as much as others.
+
+- name: Workstation | Linux | Software | LXQt | Facts | Defaults
+  ansible.builtin.set_fact:
+    lxqt_package: lxqt
+
+- name: Workstation | Linux | Software | LXQt | Facts | Debian Derivitives
+  ansible.builtin.set_fact:
+    lxqt_package: task-lxqt-desktop
+  when: ansible_distribution in ("Debian", "Devuan")
+
+- name: Workstation | Linux | Software | LXQt | Install
+  ansible.builtin.package:
+    name:
+      - "{{ lxqt_package }}"
+      - "{{ sddm }}"
+    state: present
+    update_cache: true

tasks/workstation/linux/software/nodejs.yml

@@ -0,0 +1,47 @@
+---
+# 20260730 - Hyperling
+# Install much more recent Node versions.
+
+# https://linuxcapable.com/how-to-install-node-js-on-debian-linux/
+
+- name: Workstation | Software | NodeJS
+  block:
+
+  - name: Workstation | Software | NodeJS | apt
+    block:
+
+    - name: Workstation | Software | NodeJS | apt | Facts
+      ansible.builtin.set_fact:
+        node_version: node_24.x
+
+    - name: Workstation | Software | NodeJS | apt | Old | Remove
+      ansible.builtin.package:
+        name: npm
+        state: absent
+
+    - name: Workstation | Software | NodeJS | apt | extrepo | Install
+      ansible.builtin.package:
+        name: extrepo
+        state: present
+        update_cache: true
+
+    - name: Workstation | Software | NodeJS | apt | extrepo | Enable
+      ansible.builtin.shell: "extrepo enable {{ node_version }}"
+
+    - name: Workstation | Software | NodeJS | apt | Install
+      ansible.builtin.package:
+        name: nodejs
+        state: latest
+        update_cache: true
+
+    when: ansible_pkg_mgr == "apt"
+
+  - name: Workstation | Software | NodeJS | All Others | Install
+    ansible.builtin.package:
+      name:
+        - nodejs
+        - npm
+      state: present
+    when: ansible_pkg_mgr != "apt"
+
+  when: coding

tasks/workstation/linux/software/packages.yml

@@ -6,7 +6,7 @@
 # Needed for dnf packages such as vlc.
 # https://docs.fedoraproject.org/en-US/quick-docs/rpmfusion-setup/
 - name: Workstation | Linux | Software | Packages | Fedora Fusion Repos
-  shell: "{{ item }}"
+  ansible.builtin.shell: "{{ item }}"
   loop:
     - "dnf install -y https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm"
     - "dnf config-manager --enable rpmfusion-free"
@@ -20,9 +20,9 @@
 ## Packages ##
 
 - name: Workstation | Linux | Software | Packages | Install Software (Editing)
-  package:
+  ansible.builtin.package:
     name:
-    - "{{ ffmpeg }}"
+      - "{{ ffmpeg }}"
     state: present
   when: editing in (true, "video", "audio")
 
@@ -32,37 +32,95 @@
 # Software not yet available or working properly in Flatpak form.
 
 - name: Workstation | Linux | Software | Packages | Install From Repo
-  package:
+  ansible.builtin.package:
     name:
-      - vlc
-      - "{{ appimagelauncher }}"
-      - "{{ evolution }}"
-      - "{{ evolution }}*"
+      - "{{ vlc }}"
+      - "{{ vlc_plugins }}"
       - gparted
-      - hugo
+      - "{{ firefox }}"
+      - "{{ firefox_esr }}"
+      - "{{ wireless_tools }}"
+      - "{{ notify_send }}"
+      - "{{ fyi }}"
+      - "{{ gnome_boxes }}"
+      - "{{ rhythmbox }}"
+      - "{{ blueman }}"
+      - "{{ mpv }}"
+      - "{{ transmission_gtk }}"
+      - "{{ transmission_qt }}"
+      - "{{ libreoffice }}"
+      - "{{ strawberry }}"
     state: present
 
-- name: Workstation | Linux | Software | Packages | GS Connect (KDE Connect, Android Tool)
-  package:
+- name: Workstation | Linux | Software | Packages | Install From Repo [Coding]
+  ansible.builtin.package:
     name:
-    - gnome-shell-extension-gsconnect
+      - "{{ appimagelauncher }}"
+      - hugo
+      - ansible-lint
+    state: present
+  when: coding
+
+- name: Workstation | Linux | Software | Packages | Install From Repo [Editing]
+  ansible.builtin.package:
+    name:
+      - gimp
+    state: present
+  when: editing
+
+- name: Workstation | Linux | Software | Packages | Install Audio (Looking at you, Artix)
+  ansible.builtin.package:
+    name:
+      - pipewire
+      - pipewire-pulse
+      - wireplumber
+      - pipewire-alsa
+    state: present
+  when: ansible_pkg_mgr == "pacman"
+    and ansible_service_mgr == "runit"
+
+- name: Workstation | Linux | Software | Packages | Extra For Liberated Init Systems
+  ansible.builtin.package:
+    name:
+      - "{{ dunst }}"
+    state: present
+  when: ansible_service_mgr != "systemd"
+
+- name: Workstation | Linux | Software | Packages | Install From AUR
+  ansible.builtin.shell: "yay -Qs {{ item }} || yay --noconfirm -S {{ item }}"
+  loop:
+    - appimagelauncher
+  when: ansible_pkg_mgr == "pacman"
+  become: true
+  become_user: "{{ aur_user }}"
+  ignore_errors: true
+
+- name: Workstation | Linux | Software | Packages | Install From AUR [Coding]
+  ansible.builtin.shell: "yay -Qs {{ item }} || yay --noconfirm -S {{ item }}"
+  loop:
+    - vscodium-bin
+    - android-studio
+  when: ansible_pkg_mgr == "pacman"
+    and coding
+  become: true
+  become_user: "{{ aur_user }}"
+  ignore_errors: true
+
+- name: Workstation | Linux | Software | Packages | GS Connect (KDE Connect, Android Tool)
+  ansible.builtin.package:
+    name:
+      - gnome-shell-extension-gsconnect
     state: present
   when: ansible_distribution in ("Debian")
-  ignore_errors: yes
+
 
 # Remove Repo Software #
 
 - name: Workstation | Linux | Software | Packages | Remove Applications
-  package:
+  ansible.builtin.package:
     name:
-    - "{{ firefox }}"
-    - "{{ firefox_esr }}"
-    - "{{ thunderbird }}"
-    - steam
-    - vscode
-    - code
-    - libreoffice
-    - "*libreoffice*"
-    - '*libreoffice*'
-    - gimp
+      - "{{ thunderbird }}"
+      - "{{ evolution }}"
+      - steam
+      - code
     state: absent

tasks/workstation/linux/software/tlp.yml

@@ -0,0 +1,194 @@
+---
+# 20260716 - Hyperling
+# Attempt to save battery life by having a daemon tune the CPU and disable
+# unneeded components like USB, Bluetooth, WiFi, etc when not in use.
+
+## Variables ##
+
+- name: Workstation | Linux | Software | TLP | Facts
+  ansible.builtin.set_fact:
+    tlp_package: "tlp"
+    tlp_rdw: "tlp-rdw"
+    tlp_smart: "smartmontools"
+    tlp_config: "/etc/tlp.conf"
+    tlp_service: "tlp"
+    tlp_run_script: "tlp"
+    ppd_package: "power-profiles-daemon"
+    ppd_service: "power-profiles-daemon"
+    acf_package: "auto-cpufreq"
+    acf_service: "auto-cpufreq"
+
+- name: Workstation | Linux | Software | TLP | Facts (Artix)
+  ansible.builtin.set_fact:
+    ppd_package: "power-profiles-daemon power-profiles-daemon-runit"
+    tlp_run_script: tlp-runit
+  when: ansible_pkg_mgr == "pacman"
+    and ansible_service_mgr == "runit"
+
+## Conflicts ##
+
+#- name: Workstation | Linux | Software | TLP | Conflicts | Disable
+#  ansible.builtin.service:
+#    name: "{{ item }}"
+#    state: stopped
+#    enabled: false
+#  loop:
+#    - "{{ ppd_service }}"
+#    - "{{ acf_service }}"
+#  ignore_errors: true
+
+- name: Workstation | Linux | Software | TLP | Conflicts | Remove
+  ansible.builtin.package:
+    name:
+      - "{{ ppd_package }}"
+      - "{{ acf_package }}"
+    state: absent
+
+## Install TLP + Associated Software ##
+
+- name: Workstation | Linux | Software | TLP | Install
+  ansible.builtin.package:
+    name:
+      - "{{ tlp_package }}"
+      - "{{ tlp_rdw }}"
+      - "{{ tlp_smart }}"
+      - "{{ tlp_run_script }}"
+    update_cache: true
+
+## Configuration ##
+
+# Device choices:
+# - bluetooth
+# - nfc
+# - wifi
+# - wwan
+
+# Bluetooth and WiFi are not always used so disable on boot.
+# NFC and WWAN (cellular) are never used so always disable.
+
+- name: Workstation | Linux | Software | TLP | Config
+  ansible.builtin.lineinfile:
+    path: "{{ tlp_config }}"
+    regexp: '{{ item.key }}'
+    line: '{{ item.value }} # MANAGED BY ANSIBLE'
+    state: present
+    create: true
+    backup: true
+  loop:
+    - { "key": '^[\#]?TLP_ENABLE', "value": 'TLP_ENABLE=1'}
+    - { "key": '^[\#]?TLP_DEFAULT_MODE', "value": 'TLP_DEFAULT_MODE=SAV'}
+      ## Device Controls ##
+    - { "key": '^[\#]?DEVICES_TO_DISABLE_ON_STARTUP', "value": 'DEVICES_TO_DISABLE_ON_STARTUP="bluetooth nfc wwan"'}
+      # Ensure these stay commented, once the device is booted the user is in control. #
+    - { "key": '^[\#]?DEVICES_TO_ENABLE_ON_STARTUP', "value": '#DEVICES_TO_ENABLE_ON_STARTUP=""'}
+    - { "key": '^[\#]?DEVICES_TO_ENABLE_ON_AC',      "value": '#DEVICES_TO_ENABLE_ON_AC=""'}
+    - { "key": '^[\#]?DEVICES_TO_DISABLE_ON_BAT',    "value": '#DEVICES_TO_DISABLE_ON_BAT=""'}
+      # Help preserve battery life by not fully charging. #
+    - { "key": '^[\#]?START_CHARGE_THRESH_BAT0', "value": 'START_CHARGE_THRESH_BAT0={{ "60" if battery else "90" }}'}
+    - { "key": '^[\#]?STOP_CHARGE_THRESH_BAT0',  "value":  'STOP_CHARGE_THRESH_BAT0={{ "80" if battery else "95" }}'}
+    - { "key": '^[\#]?START_CHARGE_THRESH_BAT1', "value": 'START_CHARGE_THRESH_BAT1={{ "60" if battery else "90" }}'}
+    - { "key": '^[\#]?STOP_CHARGE_THRESH_BAT1',  "value":  'STOP_CHARGE_THRESH_BAT1={{ "80" if battery else "95" }}'}
+      # Do not let the WiFi device go DORMANT.
+    - { "key": '^[\#]?WIFI_PWR_ON_AC',  "value": 'WIFI_PWR_ON_AC=off'}
+    - { "key": '^[\#]?WIFI_PWR_ON_BAT', "value": 'WIFI_PWR_ON_BAT=off'}
+      # Do not let USB devices go dormant.
+    - { "key": '^[\#]?USB_AUTOSUSPEND', "value": 'USB_AUTOSUSPEND=0'}
+
+
+## Enable + Start ##
+
+# Ensure the service is running and will run after reboot.
+
+- name: Workstation | Linux | Software | TLP | Enable + Start
+  ansible.builtin.service:
+    name: "{{ tlp_service }}"
+    state: started
+    enabled: true
+  when: ansible_service_mgr not in ("runit")
+
+- name: Workstation | Linux | Software | TLP | runit | Devuan Block
+  block:
+
+  - name: Workstation | Linux | Software | TLP | runit | Devuan | Facts 01
+    ansible.builtin.set_fact:
+      devuan_tlp_dir: "{{ runit_script_dir }}/{{ tlp_service }}"
+
+  - name: Workstation | Linux | Software | TLP | runit | Devuan | Facts 02
+    ansible.builtin.set_fact:
+      devuan_tlp_run: "{{ devuan_tlp_dir }}/{{ runit_service_script }}"
+
+  - name: Workstation | Linux | Software | TLP | runit | Devuan | Create Script
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - "mkdir -pv {{ devuan_tlp_dir }}"
+      - "echo '#!/bin/sh' > {{ devuan_tlp_run }}"
+      - "echo 'exec /usr/sbin/{{ tlp_service }} start' >> {{ devuan_tlp_run }}"
+      - "chmod +x {{ devuan_tlp_run }}"
+
+  when: ansible_service_mgr == "runit"
+    and ansible_pkg_mgr == "apt"
+
+- name: Workstation | Linux | Software | TLP | runit | Enable + Start
+  command: "{{ item }}"
+  loop:
+    - "ln -sf {{ runit_script_dir }}/{{ tlp_service }} {{ runit_service_dir }}/{{ tlp_service }}"
+    #- "sv start {{ tlp_service }}" # Not necessary and sometimes gives a false negative.
+  when: ansible_service_mgr == "runit"
+
+- name: Workstation | Linux | Software | TLP | runit | Functions & Aliases
+  ansible.builtin.blockinfile:
+    path: "{{ item }}"
+    block: |
+      function tlp-devices {
+        if [[ ! -z "$@" ]]; then
+          tlp-devices
+          echo -e "\n Applying '$@'...\n"
+        fi
+        wifi $@
+        bluetooth $@
+        nfc $@
+        wwan $@
+      }
+      alias devices="tlp-devices "
+
+      function devices-off {
+        echo -e "\n Checking Mullvad Status...\n"
+        mullvad status
+
+        echo -e "\n Checking Hardware Status...\n"
+        tlp-devices off
+
+        echo -e "\n Disconnecting Mullvad...\n"
+        mullvad disconnect
+        sleep 3
+        mullvad status
+      }
+      alias off="devices-off "
+
+      function devices-on {
+        echo -e "\n Checking Mullvad Status...\n"
+        mullvad status
+
+        echo -e "\n Checking Hardware Status...\n"
+        tlp-devices on
+
+        echo -e "\n Connecting Mullvad...\n"
+        mullvad connect
+        mullvad reconnect
+        sleep 3
+        mullvad status
+
+        echo -e "\n Rehecking Mullvad Status...\n"
+        sleep 12
+        mullvad status
+      }
+      alias on="devices-on "
+    marker: '# {mark} MANAGED BY ANSIBLE | tlp'
+    state: present
+    create: true
+    backup: false
+  loop:
+    - "{{ user_user.home }}/.bashrc"
+    - "{{ user_user.home }}/.zshrc"
+    - "{{ user_root.home }}/.bashrc"
+    - "{{ user_root.home }}/.zshrc"

tasks/workstation/linux/software/vpn.yml

@@ -1,23 +1,122 @@
 ---
 # Install VPN client(s).
-# https://mullvad.net/en/help/install-mullvad-app-linux
 
-- name: Workstation | Software | VPN | Add Mullvad Repo [apt]
-  shell: "{{ item }}"
-  loop:
-    - sudo curl -fsSLo /usr/share/keyrings/mullvad-keyring.asc https://repository.mullvad.net/deb/mullvad-keyring.asc
-    - echo "deb [signed-by=/usr/share/keyrings/mullvad-keyring.asc arch=$( dpkg --print-architecture )] https://repository.mullvad.net/deb/stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/mullvad.list
-    - apt update
+- name: Workstation | Software | VPN | Mullvad
+  block:
+
+  # https://mullvad.net/en/help/install-mullvad-app-linux
+
+  - name: Workstation | Software | VPN | Mullvad | Add Repo [apt]
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - sudo curl -fsSLo /usr/share/keyrings/mullvad-keyring.asc https://repository.mullvad.net/deb/mullvad-keyring.asc
+      - echo "deb [signed-by=/usr/share/keyrings/mullvad-keyring.asc arch=$( dpkg --print-architecture )] https://repository.mullvad.net/deb/stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/mullvad.list
+      - apt update
+    when: ansible_pkg_mgr == "apt"
+
+  - name: Workstation | Software | VPN | Mullvad | Add Repo [dnf]
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - sudo dnf config-manager --add-repo https://repository.mullvad.net/rpm/stable/mullvad.repo
+    when: ansible_pkg_mgr == "dnf"
+
+  - name: Workstation | Software | VPN | Install
+    ansible.builtin.package:
+      name:
+        - mullvad-vpn
+      state: present
+
+  - name: Workstation | Software | VPN | Install (Artix, runit)
+    ansible.builtin.package:
+      name:
+        - mullvad-vpn-runit
+      state: present
+    when: ansible_pkg_mgr == "pacman"
+      and ansible_service_mgr == "runit"
+
+  when: ansible_distribution in ("Debian", "Ubuntu")
+     or ansible_pkg_mgr in ("pacman", "dnf")
+
+## Specific Distros ##
+
+- name: Workstation | Software | VPN | Mullvad | Devuan (runit)
+  block:
+
+  - name: Workstation | Software | VPN | Mullvad | Devuan | Facts 01
+    ansible.builtin.set_fact:
+      devuan_mullvad_dir: "{{ global_src }}/mullvad-installer"
+      mullvad_deb_url: https://mullvad.net/en/download/app/deb/latest
+      mullvad_repack_url: https://github.com/sys-fs/mullvad-repack
+
+  - name: Workstation | Software | VPN | Mullvad | Devuan | Facts 02
+    ansible.builtin.set_fact:
+      mullvad_repack_dir: "{{ devuan_mullvad_dir }}/mullvad_repack"
+
+  - name: Workstation | Software | VPN | Mullvad | Devuan | Check
+    ansible.builtin.stat:
+      path: '/opt/Mullvad VPN'
+    register: mullvad_installed
+
+  - name: Workstation | Software | VPN | Mullvad | Devuan | Install
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - "mkdir -pv {{ devuan_mullvad_dir }}"
+      - "curl -L -o {{ devuan_mullvad_dir }}/Mullvad.deb {{ mullvad_deb_url }}"
+      - "rm -rfv {{ mullvad_repack_dir }}"
+      - "git clone {{ mullvad_repack_url }} {{ mullvad_repack_dir }}"
+      - "cd {{ mullvad_repack_dir }} && ./repack.sh ../Mullvad.deb"
+      - "apt-get install -y --reinstall {{ devuan_mullvad_dir }}/Mullvad_repack.deb"
+    when: not mullvad_installed.stat.exists
+
   when: ansible_pkg_mgr == "apt"
+    and ansible_service_mgr != "systemd"
 
-- name: Workstation | Software | VPN | Add Mullvad Repo [dnf]
-  shell: "{{ item }}"
+## Link & Enable ##
+
+- name: Workstation | Software | VPN | Mullvad | PATH | Facts 01
+  ansible.builtin.set_fact:
+    mullvad_exe: 'mullvad-vpn'
+    mullvad_exe_dir: '/opt/Mullvad\ VPN'
+
+- name: Workstation | Software | VPN | Mullvad | PATH | Facts 02
+  ansible.builtin.set_fact:
+    mullvad_exe_new: "{{ global_bin }}/{{ mullvad_exe }}"
+
+- name: Workstation | Software | VPN | Mullvad | PATH | Facts (pacman)
+  ansible.builtin.set_fact:
+    mullvad_exe_dir: '/usr/bin'
+  when: ansible_pkg_mgr == "pacman"
+
+- name: Workstation | Software | VPN | Mullvad | PATH | Install
+  ansible.builtin.shell: "{{ item }}"
   loop:
-    - sudo dnf config-manager --add-repo https://repository.mullvad.net/rpm/stable/mullvad.repo
-  when: ansible_pkg_mgr == "dnf"
+    - rm {{ mullvad_exe_new }} || echo "File does not exist."
+    - echo "#!/usr/bin/env sh" > {{ mullvad_exe_new }}
+    - echo "cd {{ mullvad_exe_dir }}" >> {{ mullvad_exe_new }}
+    - echo "./{{ mullvad_exe }}" >> {{ mullvad_exe_new }}
+    - chmod +x {{ mullvad_exe_new }}
 
-- name: Workstation | Software | VPN | Install
-  package:
-    name:
-      - mullvad-vpn
-    state: present
+- name: Workstation | Software | VPN | Mullvad | runit | Enable Service (mullvad-daemon)
+  ansible.builtin.file:
+    src: "{{ runit_script_dir }}/mullvad-daemon"
+    dest: "{{ runit_service_dir }}/mullvad-daemon"
+    state: link
+    force: true
+  when: ansible_service_mgr == "runit"
+
+- name: Workstation | Software | VPN | Mullvad | runit | Remove Old Service (mullvad)
+  ansible.builtin.file:
+    path: "{{ runit_service_dir }}/mullvad"
+    state: absent
+  when: ansible_service_mgr == "runit"
+
+- name: Workstation | Software | VPN | Mullvad | PATH | Enable Lockdown
+  ansible.builtin.shell: "{{ item }}"
+  loop:
+    - mullvad lan set block
+    - mullvad tunnel set ipv6 on
+    - mullvad dns set default --block-ads --block-trackers --block-malware --block-gambling --block-adult-content --block-social-media
+    - mullvad auto-connect set on
+    - mullvad lockdown-mode set on
+    - mullvad beta-program set off
+  become_user: "{{ user }}"

tasks/workstation/linux/software/vscodium.yml

@@ -7,64 +7,71 @@
 # This also exists but was not utilized:
 #   https://gitlab.com/paulcarroty/vscodium-deb-rpm-repo
 
-## Facts ##
+- name: Workstation | Linux | Software | VS Codium
+  block:
 
-# Paths
+  ## Facts ##
+
+  # Paths
+
+  - name: Workstation | Linux | Software | VS Codium | Facts
+    ansible.builtin.set_fact:
+      vscodium_source_list: "/etc/apt/sources.list.d/vscodium.list"
+      vscodium_keyfile: "/usr/share/keyrings/vscodium.gpg"
+
+  # Checks
+
+  - name: Workstation | Linux | Software | VS Codium | Check PPA
+    ansible.builtin.stat:
+      path: "{{ vscodium_source_list }}"
+      get_attributes: false
+      get_checksum: false
+      get_mime: false
+    register: vscodium_source_exists
+
+  ## Install Repo ##
+
+  - name: Workstation | Linux | Software | VS Codium | Add PPA
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - "wget -qO - https://gitlab.com/paulcarroty/vscodium-deb-rpm-repo/raw/master/pub.gpg \
+        | gpg --dearmor \
+        | sudo tee {{ vscodium_keyfile }} > /dev/null"
+      - "echo 'deb [arch=amd64,arm64 signed-by={{ vscodium_keyfile }}] https://download.vscodium.com/debs vscodium main' \
+        | sudo tee {{ vscodium_source_list }}"
+      - "sudo apt update"
+    when: coding
+      and not vscodium_source_exists.stat.exists
+
+  ## Install Package ##
+
+  - name: Workstation | Linux | Software | VS Codium | Install
+    ansible.builtin.package:
+      name:
+        - codium
+      state: present
+    when: ansible_pkg_mgr == "apt"
+      and coding
+
+  ## Remove Package ##
+
+  - name: Workstation | Linux | Software | VS Codium | Uninstall
+    ansible.builtin.package:
+      name:
+        - codium
+      state: absent
+    when: not coding
+
+  ## Remove Repo ##
+
+  - name: Workstation | Linux | Software | VS Codium | Remove PPA
+    ansible.builtin.shell: "{{ item }}"
+    loop:
+      - "mv {{ vscodium_source_list }} ~/TRASH/"
+      - "mv /etc/apt/keyrings/vscodium*.gpg ~/TRASH/"
+      - "sudo apt update"
+    when: not coding
+      and vscodium_source_exists.stat.exists
 
-- name: Workstation | Linux | Software | VS Codium | Facts
-  set_fact:
-    vscodium_source_list: "/etc/apt/sources.list.d/vscodium.list"
-    vscodium_keyfile: "/usr/share/keyrings/vscodium.gpg"
   when: ansible_pkg_mgr == "apt"
-
-# Checks
-
-- name: Workstation | Linux | Software | VS Codium | Check PPA
-  stat:
-    path: "{{ vscodium_source_list }}"
-    get_attributes: false
-    get_checksum: false
-    get_mime: false
-  register: vscodium_source_exists
-  when: ansible_pkg_mgr == "apt"
-
-## Install Repo ##
-
-- name: Workstation | Linux | Software | VS Codium | Add PPA
-  shell: "{{ item }}"
-  loop:
-    - "wget -qO - https://gitlab.com/paulcarroty/vscodium-deb-rpm-repo/raw/master/pub.gpg \
-      | gpg --dearmor \
-      | sudo tee {{ vscodium_keyfile }} > /dev/null"
-    - "echo 'deb [arch=amd64,arm64 signed-by={{ vscodium_keyfile }}] https://download.vscodium.com/debs vscodium main' \
-      | sudo tee {{ vscodium_source_list }}"
-    - "sudo apt update"
-  when: ansible_pkg_mgr == "apt" and coding == true and not vscodium_source_exists.stat.exists
-
-## Install Package ##
-
-- name: Workstation | Linux | Software | VS Codium | Install
-  package:
-    name:
-      - codium
-    state: present
-  when: ansible_pkg_mgr == "apt" and coding == true
-
-## Remove Package ##
-
-- name: Workstation | Linux | Software | VS Codium | Uninstall
-  package:
-    name:
-      - codium
-    state: absent
-  when: ansible_pkg_mgr == "apt" and coding != true
-
-## Remove Repo ##
-
-- name: Workstation | Linux | Software | VS Codium | Remove PPA
-  shell: "{{ item }}"
-  loop:
-    - "mv {{ vscodium_source_list }} ~/TRASH/"
-    - "mv /etc/apt/keyrings/vscodium*.gpg ~/TRASH/"
-    - "sudo apt update"
-  when: ansible_pkg_mgr == "apt" and coding != true and vscodium_source_exists.stat.exists
+    and ansible_distribution in ("Debian", "Ubuntu")

tasks/workstation/mac-os/software/brew.yml

@@ -4,7 +4,7 @@
 # FreeBSD has its own. May be good to keep it separate so it's more to-the-point.
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages
-  package:
+  ansible.builtin.package:
     name:
       - atomic-wallet
       - brave-browser
@@ -14,44 +14,44 @@
     status: present
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages (Coding)
-  package:
+  ansible.builtin.package:
     name:
       - android studio
       - firefox-esr
       - visual-studio-code
     status: present
-  when: coding == true
+  when: coding
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages (Editing:Video)
-  package:
+  ansible.builtin.package:
     name:
       - shotcut
     status: present
   when: editing in (true, "video")
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages (Editing:Audio)
-  package:
+  ansible.builtin.package:
     name:
       - audacity
     status: present
   when: editing in (true, "audio")
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages (Gaming)
-  package:
+  ansible.builtin.package:
     name:
       - battle-net
       - steam
     status: present
-  when: gaming == true
+  when: gaming
 
 - name: Workstation | Mac OS | Software | Brew | Install Packages (Cycling)
-  package:
+  ansible.builtin.package:
     name:
       - zwift
     status: present
-  when: cycling == true
+  when: cycling
 
 #- name: Workstation | Mac OS | Software | Brew | Remove Packages
-#  package:
+#  ansible.builtin.package:
 #    name:
 #    status: present

tasks/workstation/shared/cron/shutdown.yml

@@ -0,0 +1,21 @@
+# TBD:
+# - Decide whether this should be added to local.yml since wall does not work with gnome-terminal.
+---
+
+- name: Workstation | Shared | Cron | Root | Shutdown Warnings
+  ansible.builtin.cron:
+    user: root
+    name: "Shutdown Warnings"
+    minute: "*"
+    hour: "19-23"
+    job: /usr/bin/wall "Shutting down soon! Please save your work!" && /usr/sbin/shutdown --show
+    state: present
+
+- name: Workstation | Shared | Cron | Root | Shutdown
+  ansible.builtin.cron:
+    user: root
+    name: "Shutdown"
+    minute: "*/5"
+    hour: "20-23"
+    job: /usr/sbin/shutdown -h 4
+    state: present