me/hugo-recipes
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Finalize carry case section. Add placeholder for the video.

Browse Source
This commit is contained in:
Hyperling
2025-10-29 21:54:42 -07:00
parent e2a28edb3c
commit 3cb71a0ecd
1 changed files with 12 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
WIP/wooden-camping-chair.md
View File

@@ -1,8 +1,12 @@
---
title: "Manly Wooden Camping Chair!!"
title: "Wooden Camping Chair!"
author: 'Chad Michael "Bug" Greenwood'
---
# Video
![TBD/TODO](https://odysee.com/@HyperVegan:2)
# "Ingredients"
8ft long 2x10 (about $20 USD at Home Depot) [`example`](https://www.homedepot.com/p/2-in-x-10-in-x-8-ft-2-Premium-Grade-Fir-Dimensional-Lumber-915564/206182030)
@@ -82,6 +86,8 @@ _____________________
1. You now have the two areas to cut off of the seat board. (X'd portion)
1. Try fitting it into the back. Use whatever tools necessary to clean up the hole or shave off the edges of the seat insert. I used a folding saw to open up the hole and a hand axe to shave the insert.
Keep these scrap pieces if you wish to add a carrying case to the back.
```
P1: ( 0, 13)
P2: (~9, 13)
@@ -151,14 +157,14 @@ P5: (6, 1.5)
## {TBD/TODO: Carry Case}
Cut off at 8.5 inches from each seat waste piece.
Cut off at 8.5 inches from each seat scrap piece.
Line up the seat with the top of the back of the back piece.
Lay the back piece on its front, place the seat on top, and line up the sitting part of the seat with the top of the back of the back piece.
Place the the shorter sides of the seat waste pieces against the back of the back piece in similar locations as they were cut off. I prefer having the factory corner facing the outside of the chair.
Place the the shorter sides of the seat scrap pieces (1.5in) against the back of the back piece in similar locations as they were cut off. I prefer having the factory corner facing the outside of the chair.
Place the 8.5in pieces across the waste pieces. Drill a pilot hole and add a 2.5in screw or similar into each corner to build the carry case frame.
Place the 8.5in pieces across the scrap pieces with the 2in sides facing down, factory edges facing the top and botton of the seat. Drill a pilot hole and add a 2.5in screw or similar into each corner to build the carry case frame.
Attach the carry case frame to the back of the back piece with mre 2.5in screws after carefully aligning the seat and having the frame centered.
I personally choose to eyeball most of this work.
I personally choose to eyeball most of this work. [TBD/TODO: Watching the video is recommended for this section.]